Solved

I want to ask about replaced hypervisor drive. Here is the machine Nutniax Node : NX-1065-G6 Default Hypervisor Boot Drive : Micron 5100 MMTFDDAV240TBC New Hypervisor Boot Drive : SSD WD Green 240GB 3D NAND M.2 SATA 2280 Question : is it compatible and working properly if the default replaced with new hypervisor boot drive ? Reference : Node Naming (NX-1065-G6). Only give information 2 x M.2 Device 240GB.

Hello dear Nutanix community,Just wanted to check, does the IPMI port on NX servers offer a UI for server health monitoring/management and temperature/fan stats like iDRAC for Dell XC servers or HP iLO for HP?Thank you.

Hello, We are trying to find out the level or bandwidth of the iSCSI traffic that Analytics requires. This is because we have allocated Analytics in a different network than the CVMs (Data Service IP) so the traffic will be managed by the firewall. We don’t want to overload the firewall with this kind of traffic that could affect to the rest. Any experience with it?. I haven’t been able to find this kind of detail in the documentation. Thank you!

Hi There,So I made a stupid mistake and removed 2 x eth interfaces from all 3 nodes within the only virtual switch on my cluster. This was within Prism Element. I can still access AHV via IPMI, can no longer access Prism Element. Is there a way to add the eth interfaces back onto the virtual switch via AHV/AOS through the cmdlets?Cheers in advance.Adam 

Hello everyone,I currently have several old VMs that have been turned off for more than 2 years. No one in my workplace can tell me or remember what are they for. I am considering deleting them (to release storage), but before doing that is there something I should check before? Could those VMs be connected with online VMs in anyway for production?Could I take a useful snapshot, even though I will delete the VM afterwards?

We’ve noticed that after updating clusters to AOS 5.20.3.5 LTS, we’re unable to launch those clusters from PC. PE seems to still be fine. Anyone run into this?

How do I enable copy and paste in VMware for text in AHV Console?

Just a basic quick question I’d like confirmation on if possible. In a Nutanix Metro availability configuration (ESXi stretched cluster stretched across two sites) do all the CVM’S from both clusters have to be on the same Layer 2 Network to be supported?

I am configuring Leap on 2 remote clusters running AHV and I have performed the following :Deployed Prism Central on each cluster Enabled Nutanix Leap on each AZ Paired the 2 clusters successfully Created Protection Policies and replicated some VMs (it works properly as I am able to manually perform a restore on the target cluster)When creating a recovery plan, on network settings page, production and test failover subnets (for the remote site) are not shown and a message 'no options available' is displayed in the GUI.Please see below :  Do you have an idea of what is wrong ? Is there anything missing ?Thanks.

Is there any way to migrate a VM running in VMware ESXI to AHV without using Nutanix Move?  What about if the client has the VM files( vmx, vmdk, etc ) in his external storage device and want to import into AHV?

Hi!   On Nutanix Files 4+, is it possible to reduce the size of the File Server?   Or, is the only option destruction and re-do?

Hello all, It seems that I am having issues with one of my ESXI hosts in my Nutanix. Nutanix G8ESXI 6.7 vSphere 6.7 This is a new set up, so not entirely devastated. Now the reason I believe it became disconnected is because in vSphere I see Network Adapter 1 VM Network (Disconnected). However the other 2 CVM’s are working just fine and are connected. in Prism when I click on the node I do see the host details, but nothing like the name I originally gave it, under the hardware tab and Host NIC’s there's nothing.Under Prism settings > Configure CVM I see 2 of the 3 and of course the one missing is the one I'm having issues with. Now I am able to see open the CVM VM in vSphere and Prism, but here's the other issue. When I set these up I used a password manager and gave all 3 CVM’s the same password, why I bring this up is because the other 2 CVM’s take the password and username, but the bad CVM doesn't. Even the default password for the G8 models doesn't work. So in other words I cann

It’s unclear to me whether or not it is supported to mount datastores, whether NFS or iSCSI, from external sources onto VMware hosts running on Nutanix for VMDK storage for VMs. I apologize if this has been answered before or clearly stated in docs somewhere.

We want to implement Nutanix Leap On premise between two clusters. The two cluster are installed on different locations (4km between the two sites).The two clusters are intented to be active, so each cluster must replicate VMs to each other (Cluster A → Cluster B and Cluster B → Cluster A)As per the documentation, we need an instance of Prism central on each site, which represents an Availability Zone.For easy management purposes, we want to be able to manage all the 2 clusters from a single pane of glass; is it possible to have a third Prism central instance to manage all these 2 clusters ?How this could be implemented?

Hello dear Nutanix community,A client of my company has purchased 3 HX Lenovo nodes and 2 ToR Cisco switches, each node was equipped with only 2 ports 10GbE (the LOM ones).  However, with only 2 ports, I don’t know how to setup the cluster in a way that there is a redundancy. The current rack looks like this without any cabling yet: The IPMI port will go to a Management Switch, so there’s no issue there. But so far, I am confused as to how setup the cabling for the two interfaces; Should eth0 go to a port on SW1 and eth1 go to a port on SW2 for each of the 3 servers? or should both eth0 and eth1 go to the same switch? If I understood correctly the AHV Networking articles in Nutanix, eth0 and eth1 will form a logical bond (br0-up) inside the br0 bridge. And I’m guessing since we only have 2 uplinks per nodes (I’m going for the first scenario):> eth0 will go to SW1Port1 (for example), SW1Port1 will be configured as a Trunk port, for which the CVM/AHV VLAN and User VMs VLANs will be de

how do 3 node cluster  guest os migrate to 2 node cluster ?

Currently I have 2 Cluster of 2 CPU with 2 core per CPU. so haw I calculate vCPU:pCPU Ratio?

Operation failed. Reason: Update of failed on 172.16.31.106 (environment phoenix) at stage 1 with error: [Failed to update firmware. Error: Failed to upgrade 3IE3. Information: [cmd: ./mp_64 -d /dev/sdg -c 1 -u -k -r -X 3 -Y 3 -v 0 dir_name: S740305N cwd: /home/nutanix/tmp/lcm_staging/S740305N ldir: ['SYS_S.bin', 'sram.bin', 'mp_64', 'mp_32', 'JMMPTOOL.ini', 'flash.ini'] x: [True, True, True, True, True, True]], Output: [ ************************************************************ * Innodisk MPTool V3.1.0 2020/03/04 * ************************************************************ Model Name : SATADOM-SL 3IE3 V2 Serial Num : B0021805110110184 FW Version : S671115N 1. TH58TFT0DDLBA8H Flash : TH58TFT0DDLBA8H Write code ....... [libjmmp.c][write_code():#2171] erase_flash fail ch : 0 blk : 2 [1;31mFail !! [m[1;31mUpgrade Fail !! [m], Error: [], return code: [4]] Logs have been collected and are available to download on 172.16.31.103 at /home/nutanix/data/log_collector/lcm_logs__172.16.31.103

We have Red Hat Virtualization from where we are going to migrate to Nutanix AHV. Virtual machines in RHV are LVM, not disks, because we are using fibre channel. How can we migrate virtual machines from RHV to AHV?

Can someone chime in on how Licensing woudl work when using AHV? For example, we currently have Windows 2012R2 Datacentre edition on each host and we have the ability to have unlimited licensed Windows Servers virtualised. I know that AHV doesn't require a license but does that mean that a license for each Widnows Virtual Server will need to be purchased hence invalidating our Datacentre license???

I want to Install Nutanix with VMware 6.7 on DELL XC 740XD Core, I use foundation 5.0.1 and AOS 5.20 (as recomendation on hardware compability), but we stuck at imaging process and log showed dependencies not met. any sugestion?I grab the log, 2021-06-04 06:27:46,980Z DEBUG Setting state of <ImagingStepValidation(<NodeConfig(10.14.43.12) @c990>) @cc10> from PENDING to RUNNING2021-06-04 06:27:46,985Z INFO Running <ImagingStepValidation(<NodeConfig(10.14.43.12) @c990>) @cc10>2021-06-04 06:31:25,810Z DEBUG Cache HIT: key(<function common_validations at 0x450a938>_()_{'global_config': <foundation.config_manager.GlobalConfig object at 0x7f3554120f50>})2021-06-04 06:31:25,813Z DEBUG Setting state of <ImagingStepValidation(<NodeConfig(10.14.43.12) @c990>) @cc10> from RUNNING to FINISHED2021-06-04 06:31:25,814Z INFO Completed <ImagingStepValidation(<NodeConfig(10.14.43.12) @c990>) @cc10>2021-06-04 06:31:25,824Z DEBUG Setting state of

Has anyone ever attempted a Host book disk repair and encountered this issue before?     All cables and SFPs are plugged in as if it were still in production. Have not yet attempted to rebuild via foundation as these were the steps provided by Nutanix support:  https://portal.nutanix.com/page/documents/details?targetId=Hypervisor-Boot-Drive-Replacement-Platform-v510-Multinode-G3G4G5:Hypervisor-Boot-Drive-Replacement-Platform-v510-Multinode-G3G4G5   Steps Taken: Downloaded and burnt phoenix.iso to USB Booted USB into Phoenix Kicked off Repair Host boot Disk and uploaded whitelisted ESXi image Encountered error I have a case open with support and have escalated and figured that while i’m waiting I could ask the community. Will provide a response here once we figure out the issue. Cheers All!   (Edit: I posted this in the CE forum by accident)

Has anyone been able to enable bitlocker on a drive within Server 2019 or 2022? Or is there an update regarding this article? Bitlocker cannot be enabled on Windows Server 2019 in VM running on AHV (nutanix.com)

Hi. I’m looking for some experiences in migrating windows user vms from acropolis hypervisor to vmware esxi. I tried and followed severals KBs and articles but none were successful. After powering on windows VM on esxi, they immediately go to the famous “blue screen” and don’t recognize the disk. Articles that I followed: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA032000000PMcKCAWhttps://portal.nutanix.com/page/documents/kbs/details?targetId=kA03200000098T7CAIhttps://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_19:mul-vm-export-as-ova-pc-t.htmlhttps://next.nutanix.com/move-application-migration-19/want-to-export-a-vm-from-ahv-here-s-how-37275Has anyone has experience with this ? Can you help me ? Best regards

So - I have been trying to get some sort of automation of my Ubuntu VM creation in Prism, either by setting up a template machine that I would later modify using cloud-init custom scripts, or even better using a custom cloud-init script at creation to run through the “Ubuntu autoinstall”  I have tried a few times now to install an Ubuntu server by clicking my way through the GUI and then using the resulting .yml file to try and install a VM from scratch… Using “clone” from a template I can use a custom script to change hostname and so forth, but still having some problems changing the network settings (saying they are disabled by system.cfg). I guess I will be able to figure that part out eventually, but my main goal is to be able to register a new machine in Netbox, and from the info I have entered there automatically create a cloud-init fileand use that to trigger VM creation in Nutanix…  When I try to create a new VM - mounted with the Ubuntu 20.04.4 installer ISO and a 100GB disk -