Solved

Can we get Exam Voucher for NCA 6.5 please?

＞This customer requires to do implement the DX380 Foundation Service without vCenter(vCSA).＞Is it acceptable to provide services without vCenter as a service requirement? There should be no vCenter when you provide the service.However, I think there must be some restrictions regarding settings.For example, LACP settings etc.This is because vDS creation is not possible. So, explain to us your service requirements to our customers.

Hi guys, i have a scenario here. An Admin forget the password and unable to access to both Prism and CLI.What should he do to regain access to the cluster? I understand if you have access to either one of Prism or CLI, you can reset the password, but what if both unable to access?

I have created an Oracle single instance in NDB module. However backup is not working because of failed snapshots. Snapshot operation always fails in Unquiesce database step. A little bit more from logs:Devices file sys_wwid t10.NUTANIX_NFS_2_0_11075_d7c7770b_7488_4d5c_82c8_52b080e12e3e PVID none last seen on /dev/sdd not found.The machine is running on Oracle Linux 9 and the database version is 19.3C. Any suggestions?

1.Does Nutanix flow has an intelligent to perform virtual switching and routing  , creating additional virtual routers ?2. Does Flow use Private vlan or different concept to identify the traffic and send to right destination?3.How the traffic flow from one tier to another tier in micro segmentation ?4. What are the changes done at openswitch level when we enable flow?5.What are the changes done at openswitch level when we enable micro segmentation?6.Does Nutanix flow support vxlan?

Hi all, I have some NX-1065-G8 & NX-8155-G8 nodes, and I want to move them to new PDUs online. What would be the proper procedure to do this? Should I just disconnect the power cords one by one of a PDU and then reconnect they one by one to the new PDU, check the status after each disconnect and reconnect to make sure the status is normal. And then do the same for the other side of the PDU? Any command or GUI operation is needed, for example, disable the power supply of a node before disconnect? Appreciated for any comments. 

I just installed PC 2023.03 and want to use LCM dark site. But when I switch to lcm, always Loading. Any place need set?

I am certified with NCA so how can I get my badge please help.

Can I test Nutanix REST API using Nutanix Test Drive? I also can not change default password for admin user in Test Drive Prism Central: “Nutanix/4u” and “nutanix/4u”  gives “Current password provided is incorrect.”

Hi,  I have 2 cluster and are planning to update the hypervisor and VM.1 cluster with 4 Dell nodes with Hyper V server 2019 Hypervisor and multiple VM with Window server and ubuntuanother cluster with 4 Dell nodes VMware Hypervisor and multiple of Window server ubuntu VM too. I have downloaded the LCM bundle package for Dell and the LCM packages and publish it onto the Dark web IIS server. However I can only see the Hardware build and the manifest.Where do I download the software build? Does the Software build package include the AOS and the Hypervisor?  Where does the Hypervisor package include? Hypervisor version ? If it is hypervisor version, does it means update the vulnerability or upgrade the version? Does the package include the monthly Microsoft vulnerability patches for window or SQL? What is the procedure or steps to do the entire updates? I do know the that hardware is the last Update Guest OS, node OS or update AOS first? Is there any available checklist that I need to d

Hi folks, when we go to add a our cluster into XRAY all the validation tests complete however on clicking done it says: Any ideas of what I should check?Our Switch has is called XrayNetwork

This one may be an obvious question, but its probably too obvious to the point that I am overthinking it.Model: NX-6035-G4I came into an environment where there are 5 clusters. Each clusters. Each one has both NIC’s on each node connected directly to the core switch. Each specifying the VLAN access on the core switch.Now the SFP ports are running DAC cables to a 10 Gig switch that is just in trunk mode. That switch then Trunks to the core switch.So are you suppose to use both? I thought you only had to use one or the other, normally this doesn't  matter, but the Core switch is over saturated and I could close out 10 Unnecessary wires.I drew a diagram encase this was wordy. 

Halo,i have problem when sharing data accross VM using VGroup.So i Create VG with name “VGroupBackup” and attach that to Windows VM for SQL Backup. I want share that VG to multiple Windows VM. The Problem is, the data from VM 1 is not syncronize to another VM. is anyone have solution for this? Thank You.

we have a cluster with 5.15.4 aos installed，recently we plan to update esxi7。0.1 to esxi 7.0.3o。anyone can tell me it is ok?

When I run NCC, it complete 100% after that the status changed to cancelled instead of success. What could be the issue ?-JAI

Nutanix environment with 74 nodes and around 2600 VMs It is observed that the VMs are overprovisioned, utilizing only about 30% of the resources. We request that you help us understand whether we have any tools, like vROps, to optimize the performance or recommend downsizing the CPU, memory, and storage.

Hello, Do we have a limit regarding how many IPMI requests for node (NX-3155G-G8) / minute ? from the NCC we have the below error ERR : Too many ipmi processes runningBRAdel

I am trying to size a Dell XC configuration, but Dell or Dell XC is not coming up in sizer?  Is this intentional?

Hi Team, Do you know if exists as-build tool running under Linux? Thanks 

api/nutanix/v2.0/storage_containers/uuidgot response body  for storage container as uuid does not exist. In nutanix client , storage container is in active state.

Hello,i have faced an issue during the NCA test because there is a difference between my name on PSI and my Government ID. and they sent me now to reschedule the test, but i see the name still the same one and i will face the same issue.  I have already sent an request to PSI via online form but no response. Appreciated if you could let me know how to change my full name in the system so that could match my name in government-issued ID for exam registration.Thanks very much. 

Hi,I have deployed a single node Nutanix CE, the deployment is done, and I am able to reach the AHV IP address but the CVM IP address is unreachable. However the CVM is reachable from the AHV when ssh. Unable to resolve the issue. 

AHV環境に新規でPrismCentralをデプロイしています。ウイザードの最後で「展開」をクリックすると「Given Input is invalid .」となりデプロイが開始されません。ウィザードの各ページでのパラメーターの入力は問題がなさそうなのですが（[次へ]がクリックできるので）、何かデプロイ時に注意すべきことがありますでしょうか。Prismのタスクには、次のエラーが記録されています。「Prism Element is not compatible to enable Microservice Infrastructure: Please ensure that Cluster Virtual IP and Data Services IP are set on the Prism Element '(Prism Central名)'」AHVのバージョンは20220304.423、PrismCentralはPrism Central 1-click deploy from Prism Element( Version: pc.2023.3 )を使用しています。

Hello all. I have a three node nutanix cluster. Recently I noticed that the VMs were down. I tried to browse to PE but I was getting connection error. I user IMPI to see what was going on and noticed that the 3rd node was down. Boot error. I replaced the SATA DOM and reimaged. I thought I could fail and be OK with only two nodes. I have access to the two AHV and CVMs but anytime I try to see if the cvm is in maintenance mode or try to come out, I get Error:Cannot connect to Prism Gateway. This error also happens when i run cluster status. I’m not sure what to do from here. This cluster isn’t under support anymore since we moved to the cloud. Just have some old VMs that someone asked for some data.  Thanks

Dear Communitiy Members,Greetings of the day!I am a newbie to Nutanix certification platform and would like to validate my skills on Nutanix. However, When I proceed for taking exam via PSI portal it is asking me for an Invitation code.Please help me with below;Is it mandatory to take an official course before taking an exam? If Not, Then kindly help with Invitation code. (Attaching screenshot below)