Solved

Hi , I am facing issue with foundation VM based process.Installation failed after phoenix got installed with fataling errorAs well as throwing error as foundation failed configuring IPMI ip's [i did manually configured iDrac IP's before starting foundation ][img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/2127i3D11472F80496F3D.jpg[/img]

Hi, I upgraded BMC Firmware from 03.24 to -> 03.40 via IPMI UI today since that i can check the version of BMC on IPMI UI page that its 03.40 upgraded among 3nodes which i upgraded but its not the same on PRISM even its accomplished. i can only see that BMC Firmware 03.40 isnt upgraded on PRISM among 3nodes i use AOS 4.7.3.2 with AHV Nutanix 20160601.44 [img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/2107iA6B3D2779D7382C9.png[/img] additionally, i have this fail message via conducting ncc health check funtion All 4nodes have intel CPU in them. The messages showing like this Detailed information for bmc_bios_version_check:Node 192.168.x.204FAIL: No Intel CPU is found on the node.Node 192.168.x.205FAIL: No Intel CPU is found on the node.Node 192.168.x.206FAIL: No Intel CPU is found on the node.Node 192.168.x.207FAIL: No Intel CPU is found on the node.Refer to KB 3565 ([url=http://portal.nutanix.com/kb/3565]http://portal.nutanix.com/kb/3565[/url]) for de

Dear Expert, My Nutanix environment as per below: 4block of Nutanix ( 8 Node ) connect to Nexus Access Switch with 10G SPF cable. Hypervisor: VMware 5.5 Issue: from vCenter we detect the host keep disconnected randomly. and vCenter become HANG Workaround: Ping continuously on Host. Result No packet drop can you please advise what need to do Regards, Hamballi

Hi, Is it possible to see VLAN base traffic in Nutanix with AHV in GUI or using CLI?

How to configure PRISM / AHV for syslog?

How many IP require for creating AFS?

We are using Apache Cloudstack 4.8.0 with Vmware 5.5 to to provide IAAS services . We want to use Nutanix as underlying infrastructure Is this implementation supported ? Is there any recommendations, best practices for deployment or a reference architecture? We also plan to have HA for a class of our vm whereas others should not be replicated. What kind of mapping between Cloudstack and Vmware organisation units, and Nutnaix Protections domains strategies should we have to achieve this goal. If none of the above is supported is Apache Cloudstack in Nutanix roadmap on Vmware or AHV ? Thank you in advance

Dears We are configuring an iSCSI target , and we have security between ipnetworks, where CVM and the host vm are in seperate network. please advise ,which all are the ports needs to be opned.

Hi last week we installed the first Nutanix cluster in Venezuela with 3 nodes, it was founded and as a best practice, the vSwitch br0 was "splited"into two vswitches by creating the br1 then the 10 GBE interfaces (eth2 and eth3) were assigned to the br0 and the 1 GBE interfaces (eth0 and eth1) were assigned to the br1, the administrator of the cluster decided to switch that assignment, i.e. to assign the 1 GBE interfaces to the br0 and the 10 GBE interfaces to the br1 by executing on the CVM's command line the command. [b][i]allssh manage_ovs --bridge_name br0 --bond_name bond0 --interface 1g update_uplinks[/i][/b] after the third node response to the command, the connection to the ssh sesion to the CVM was lost and now can't access the CVMs to revert the command neither ssh connection nor PRISM. In the nodes the 1 GBE interfaces leds are orange and red, only have access to the console by connecting a monitor and a keyboard to the physical nodes, my question is, does exist a way t

Right now we about to push ESXi 5.5 u3b so we can move on up to AOS 4.7.3.2. Since Nutanix doesn't support pushing out patches, we planned to do that with VUM which is fine. At least saving time from having to bring down each node manually for upgrading to u3b. On top of patching, we're also installing NFS VAAI VIB. In our lab, we do it via command line, but has anyone found a zip, or package that VUM can support pushing out that way we can just package our baseline with updates and the VIB file? We can't find anywhere that has a zip file or anything we can leverage thus far. Since we have two data centers a good number of nodes in the cluster at each, We'd love to save time if at all possible, so any advice is greatly appreciated. Thanks!

Hi Expert, I plan to relocate my Nutanix Box to another rack. can someone help me or guide me the proper procedure for this activity, below the details Hypervisor: ESXi 5.5 Nutanix Box: 4box Node: 16 node How can I perform the proper shutdown. I a bit confuse with some article from google

Hi, which 10G SFP+ LR (single mode) modules are supported in Nutanix NX-8035-G5 and NX-6035C-G5 nodes with C-NIC-10G-2-SI 10G network interface cards? Do the SFP+ need special branding, as e.g. for use with Cisco switches? Thanks, Erik

Where do you put the ESXi ISO files so they show up in Foundation hypervisor list? Also, is this considered a bare metal install? Also, if using Foundation, where is a good guide for installing using ESXi as the Hypervisor (Field guide not much help). Thanks

Hello All, I am new to "Nutanix XCP, One basic question regarding the Raw device mapping in Esxi using the Nutanix infrastructure. Is RDM mapping supported in the Nutanix Appliance4.6 (Nos)? If yes, Can you please share the procedure to Create a RDM (Physical mode)?.. Thanks, Bhoopathy

Hi I have aplan to reconfigure the ip addressess of all Nutanix components (hypervsors ip's ,CMV's and cluster ip. My question is what is the priority of changing ip's ( start point) and what is the worst scenario through this process? Regards

Hi guys, Need some advice We are running a realy old version of ESXi 5,5 on our Nutanix cluster Nutanix support recommended the 1 click hypervsior upgrade and to get the json file The build number we want to go to is 4345813.. there is a json file for it on the website However on the Vmware website the latest offline bundle they have is build 3248547 which is from Decemeber last year Anyone know how I can get the offline bundle for 4345813? Nutanix support didn't know how to do it

I've implemented the metro availability between two sites. I've to shut down nx block for moving it in another site. Have I stop the metro availability? Have you got a procedure? Thanks

Does AHV support VM affinity rules in 4.7.3?

Hi, I am new to Nutanix so would appreciate a bit of advice on importing a cluster into System Center Virtual Machine Manager. I have an existing Nutanix Hyper-V cluster which I want to manage via SCVMM. Has anyone got any advice in importing this into SCVMM and anything I should be aware of? Also, has anyone converted Standard switches to logical switches once the cluster has been imported or is that not a good idea? Thanks!

Dear Community, I have an issue. I'm installing a Windows 2008 standard (not R2 nor SP1) on a AHV cluster and then I need the virtIO drivers. It works fine for the iSCSI passthrough driver and the baloon. But the Networking adapter is failed. It says drivers are not signed and cannot be verified, I bypass the warning and then it says there is an error, driver corrupt blablabla. I have tried the latest Nutanix virtIO without any luck - whatever OS version, they all failed. any magic idea ? Thanks ;)

I have this same error on 3 nodes - I have checked networking / Time and connectivity and it all seems ok. Running ncc health checks on different services gives me a range of things to check. Not sure where to start with this. The Hosts are Hyper-V.

Where can download foundation 3.4 ? Thanks in advance

I've this error on the Prism Console: genesis is down on controller VM 10.1.82.21 I've run the command ncc health_checks system_checks cluster_status_check --cvm_list=10.1.82.21 and this is the error log:2016-11-10 00:16:00 INFO salt_helper.py:52 Verifying CVM salt states 2016-11-10 00:16:00 ERROR command.py:156 Failed to execute sudo /bin/ls /home/saltstates: [Errno 12] Cannot allocate memory 2016-11-10 00:16:00 CRITICAL decorators.py:46 Traceback (most recent call last): File "/home/hudsonb/workspace/workspace/User_builds/builds/build-danube-4.7.1-stable-release/python-tree/bdist.linux-x86_64/egg/util/misc/decorators.py", line 40, in wrapper File "/home/hudsonb/workspace/workspace/User_builds/builds/build-danube-4.7.1-stable-release/python-tree/bdist.linux-x86_64/egg/cluster/genesis/node_manager.py", line 2474, in sync_configuration_thr File "/home/hudsonb/workspace/workspace/User_builds/builds/build-danube-4.7.1-stable-release/python-tree/bdist.linux-x86_64/egg/cluster/genesis/node_

Based on this youtube video (39:34), there is Prism Self Service Portal Available. Nutanix .NEXT 2016 Opening Keynote Featuring Product Innovations and Demos -> [url=https://www.youtube.com/watch?v=YDVXugqcbbg]https://www.youtube.com/watch?v=YDVXugqcbbg[/url] Is this already in the current release for Prism Central, if not when would this be available? Thanks!

How can I copy guest VM's couple WIN2012R2 and Cent0S off to a network file share? Need to ensure I have backups prior to testing cluster convert. Thanks in advance