Solved

I got Nutanix Exam voucher I guess in 2020 in Xvoucher , I haven't activated that voucher. I am not sure if the voucher have validity. I checked with Nutanix community before . They mention it wont have validity till you activate it 

Hello guys,We are considering upgrading the existing Nutanix cluster environment to meet high reliability protection for critical applications.Currently we have a site A as the production cluster and site B as the disaster recovery cluster. The sites on both sides use Leap to provide a data protection strategy with an RPO 15 Mins.All sites' virtualization systems are using AHV.Now we plan to build a new site C, and do real-time synchronous data transmission with site A.Site A and Site C will be deployed in the same building.At the same time, it is hoped to ensure that the failure of either site A or site C will not cause data loss or service interruption.We hope to use Nutanix's data synchronization solution.However, we found that once the VM uses Leap to configure the real-time synchronization policy, the original Leap asynchronous transmission policy cannot be applied.It appears that only one Leap protection policy can be applied to the same VM.Therefore, based on the above situation

We have migrated a few Windows 2003 server VMs running on Nx / ESX to a new AHV cluster but in one of them after 3-4 hours the principal guest VM NIC stops responding and the VM has to be rebooted. We have tried deleting and adding the NIC manually with the same result so we had to roll back and boot that specific VM on the old Nutanix / ESX cluster. We plan to upgrade Fedora drivers to latest instead of stable and maybe change some network registry settings according to W2k3 best practices. Has anyone experienced this before? Any advice will be welcome.

What metrics are considered when Acropolis Dynamic Scheduling makes a migration decision on AHV related to CPU usage? Does ADS consider only CPU usage on the Host? Or does ADS take into consideration other VM or Host metrics such as CPU Ready, Co Stop, and/or Steal Time? 

How to Get Total vCPU count details from a cluster? 

Hello all! I hope everyone has had a wonderful start to the new year and a wonderful holiday season as well. I am running into the following error (shown in reply) when trying to deploy a new prism central instance I have tried to google around and also looking at various support topics and forums, but I have had no luck finding anything relating to what causes this. I have renewed the SSL certificate in the settings menu, but that did nothing for me. any help or guidance on where to find more information will be very much appreciated. As always, thank you for your time.

Hello Experts,I hope you are doing will,Can you please assist in providing a document or an explanation regarding the ramifications from switching between AOS LTS and AOS STS releases -if its possible - ? so far I have seen threads talking about switching from LTS to STS only.  BRAdel

Hello All,       I am working with Affinity policies and I wonder if there is an Affinity “light”. What I mean by this is in Hyper-v clusters you have a “Preferred Server” this means that if the preferred server is available the vm will reside there if not it will move to stay running. Once the preferred server is back online then it will move back. Is this possible in AHV? Thanks,Scott 

Hello,There is a way to enable and configure IPFIX exporter to an external servicewhich is not Application Discovery service ?

Hello everyone,I have downloaded the Nutanix Community edition(2020.09.16) from Download Community Edition | Nutanix Community  and installed on my system and  now I want to deploy Nutanix Files on it . Can anyone here guide me for that . Please tell me if there is need of downloading any software or something.I can access prism on my network.Please guide me for deploying Nutanix Files.Thank you

Hi,I followed instructions to migrate a Windows 2013 server from ESX to AHV successfully according using Nx MOVE to https://www.vmwaremine.com/2019/01/24/migrate-windows-2003-x86-to-nutanix-ahv/#sthash.8hpeCflP.T3i44mTW.dpbs, it works great by the way. Now… In the process SCSI disks are cloned to IDE and the Windows 2013 SCSI controller is not recognized.  In this scenario, Is it possible to reconvert those disks back to SCSI? I guess I need to get the driver first (Fedora?) and follow available procedure to reconvert, Has anyone done this? Thanks! 

Hello,We are moving VMs from an existing Nutanix cluster with VMWare to a new cluster with AHV using Nutanix Move 4.6 (last version). The problem is that for VMs with more than one network adapter in use IPs are not assigned most of the times to network adapters after the first one. This is happening for VMs running Windows 2016 but I have not checked if the same thing happens por Linux or other Windows versions but I bet it does. For this cases, Move configures those interfaces to get their IPs via DHCP. I read an old post about this behavior but applies to an older version of Nutanix Move (https://portal.nutanix.com/page/documents/kbs/details?targetId=kA07V000000LWejSAG). Is anyone experiencing the same problem? Am I missing something? Thanks in advance 

Howdy,We have a VM that is licensed by hardware. We needed to do some after hours work on the network so we shut down the VMs and cluster. When it came back online the software unlicensed itself.Looking at the 4th bullet point has be wondering from this KB: How to set MAC address for VM NIC on AHV clusterNot finding much luck to my question but I was curious if the NIC MAC changes if it moved from one node to another when it came back online?Also, is there anyway to see if the system had a prior MAC NIC?Thanks,

Our current Nutanix infrastructure has been a bit neglected for a while, AOS, PC, NCC, etc have been kept up to date but not firmware\bios or hypervisor so I need to get these done.Current infrastructure is nothing massive, two clusters one 4 node one 3 running on NX-8035-G6 and NX-8035-G7, both are AOS 5.20.4.  We have one PC running at the latest version and its sitting on a separate Management vSphere cluster along with vCenter.  Hypervisor is currently ESXi 7.0 Update 2a 17867351 on all hosts, this is Standard Edition so NO DRS ☹  My plan is to upgrade the firmware and BIOS etc via the LCM on the smaller of the two clusters. I have freed up one host so there aren’t any VM’s on it apart from the CVM.  I take it I can just run the LCM to do the firmware updates on that host and let it do its thing without having to do anything else, it’ll shut down the CVM maintenance mode the host and restart it?Once that is complete I want to upgrade ESX on that host.  I have checked the compatibil

i wants to Migrate Azure VM to AHV Cluster, please help us to Migration Procedure.Azure Cloud VM to Nutanix AHV Cluster.

Hi, Is there any free voucher available for NCP-US 6. Also, please suggest, is it fine to take NCM-MCI 5.20 now, or we can try directly with NCM-MCI 6.5?

Hello, I recently tried to run an LCM upgrade of AHV Hypervisor el7.nutanix.202011005.30417 to version el7.nutanix.20220304.242 and ran into an issue where a failure occured during the upgrade and one of my clusters is now stuck on “Detaching node xxx.xxx.xxx.xxx from metadata ring” at a little bit of a loss as to where i can move forward from here. I am unable to launch the console for the CVM and cannot ping the CVM. I apologize for the formatting on this post. This is my first time posting and I am not too sure how to best format or attach screenshots.shown below.   

Hi everyone, I got plenty of VM. some have NGT tools, some don’t. some are outdated.Is there a simple way to list NGT tools version/vm ?thanks for your tips or directions. Cheers from Tahiti.

Hello,I am conducting a test using NX-3050 equipmentI know it's an old Node-Model and I have previously installed it with AOS 5.20.2.1As you can see now, we are going to test the upgrade using LCM in AOS 5.10.11.1LCM was installed as shown using 2.5.0.2.32663 Dark-site​​​​​I uploaded the file 5.20.2.1 because I saw the opinion that if the AOS version for upgrade is EOS,it might not be displayed on the screenNo matter how long I wait for the LCM in the setting window, there is no screen, so should I reinstall it? I think I saw the opinion that the AOS version was modified because it was low, so is it impossible to update using the LCM DARK site? Thank you for reading the long article and I would really appreciate your opinion  

Hello All, I'm working with a customer on a new solution designthe customer has a VMware workload and we plan to put AHV,I want you to advise me on how I calculate the storage requirement, Let’s say the customer workload is about 170 TB how do i size the cluster storage Also, I have some questions related to storage sizesif I have 3 nodes clustereach node with 10 disks each disk 4 TB (numbers for examples only)that means total raw storage is 120 TBwe will go with RF2 which means 1 node is out of our usable capacity calculation So what is the usable capacity here after the 1 node for failure and the Raid used in the cluster creation, also what else should be conducted from the storage in storage planning?

Hello,I am certified ncp-mci 5.20 and ncm-mci, how to upgrade to 6? i saw many people took that certificate.

Hey,is there currently a free voucher for the NCA exam?I have already redeemed the voucher from: https://next.nutanix.com/education-blog-153/get-your-nca-or-ncp-mci-v6-5-certification-for-free-41217 for another certificate.Regards,Leo 

Hey Guys,For taking a Professional level certification, is it mandatory to have associate level certification?

We’re running 2 clusters which are pretty much configured the same running ESxi 7.02 AOS 5.20.4 LTS both running on nutanix hardware.  One cluster is totally fine no issues but the other you cannot create a virtual disk greater than 2Tb! The issue only came to light when we had to move a VM off to another non-nutanix host for a few days then when we went to vmotion it back it errored complaining about the disk being greater than 2Tb, it is its nearly 6Tb as its a fortinet analyzer. I’m pretty sure when the VM was sat on the nutanix cluster its disk was greater than 2Tb and it was thin provisioned with a capacity of 7Tb when it was created!  So you can’t move anything to any of the datastores that are greater than 2Tb and you also can’t create a new disk greater than 2TB.  Also if you take a look at the datastores details it says maximum VM disk size 2TB, on the other clusters datastore it says 62Tb. It's getting to be a bit of a pain as the fortinet analyzer is sitting on a box we want

When running foundation from the same network as the CVM/AHV host should be in, I’m getting this error. Phoenix Failed to load squashfs.img. I can’t ping the gateway, and it looks like during the bring up it’s unable to create bond0 with the NIC, which is 534FLR-SFP+. It’s like the link just doesn’t come up when booting into the rescue image.I’ve tried:Disabling the 4 port onboard NIC Pinging itself from ILO remote console (it works) Pinging the gateway and Foundation VM IP from ILO remote console (it fails) Installing ESXi manually on the server to confirm tagging/networking is set up properly, and it is Changing the IP of the foundation VM to another networkReally stuck hard. Any advice nutants? It’s like the rescue image doesn’tError MessageWaiting for eth0’s link to come up