Solved

Hi everyone;I want to monitor all the activities in Nutanix env, by sending the logs to qradar siem; the objectif is to identify malicious activities (by attackers) in our env.My question are :1- where can I find Nutanix logs ?2- what types of logs provided by Nutanix ?3- how to send these logs to The SIEM solution ?Thank you in advance.

"We are currently collecting usage data. Cluster usage data will be displayed here in 24 hours"" this message is showing more than two week in a Capacity section (cpu runway and storage runway) of all Esxi cluster in Prism Central.1) is there any way to verify the data collection progress in command line ?2) is there any way to stop and start this data collection ? if yes, does it affect the VMs and clusters ?PC version : 2022.4.0.1Esxi version : 7.0.1 and 7.0.2vcenter version : 7.0.3no of esxi cluster in PC : 23 clustersPC and VC are registered 

We have a scenario where we want to show session based stats for any particular VM. Using below API we can get the CPU stats for the whole VM.https://{{cluster_ip}}:{{port}}/PrismGateway/services/rest/v1/vms/{{uuid}}/stats?metrics=hypervisor_cpu_usage_ppm&intervalInSecs=60&startTimeInUsecs=1607965687547284&endTimeInUsecs=1607967487547284Is there any way or any API that can can give stats bases on machine sessions?

I try to deploy Nutanix in 3 nodes (Fujitsu) using Foundation VM , Every node have 4 NIC , 2 NIC to every switch , (Nexus 3548-x), IPMI connected to other CISCO switch We will install ESXi as hypervisor , The deployment fail , when i follow up in node console , it fail after creation bond and try to connect to foundation VM My question are :it should be connection between AOS to foundation VM IP ?what is best practices for configuration in two nexus switches and cisco switch , for example , all 10g in nexus switch are trunk ports , native vlan is cvm vlan … what i need more to do ? 

Can we receive Rsyslog files per CVM based? Or it has to be via PC only?Can I do them individually?

I’m looking to upgrade the hypervisor on my cluster of NX-8035-G6 hardware however the download site only lists ESXi version 7.0.0-ga (build 15843807) as the latest for this hardware line - which was released from VMware almost 2 years ago.Can I use this older .json file with newer versions of ESXi? For example version 7 Update 3?Or, since there appears to be support for these newer versions of ESXI for other vendors (like the Dell hardware line),  can I use the .json files for the Dell hardware along with the new ESXi binary’s on my cluster of NX-8035-G6 nodes?

Running IR Collaborate Software on a Nutanix Windows Server and I need to know how to “Whitelist” the IR Application; Configuration of the application involves running Scripts on a Cisco Cluster for monitoring and a Desktop Client; I can’t execute the scripts or login to the desktop client without “Whitelisting” it - 

I have a question I have ONE NX-1365-G5 with like ESXi 6.5, but I don't see the backplane disksat the start of the server I see my lsi3008 SAS card with the disks but not on ESXi any idea?

Hey, all. Does anyone know where I can get a voucher so that I can do my NCSE Exam?? I got one from Nutanix Essentials but it expired on me…… :(

Hi everyone, I am currently taking NCA 5.20 course and while I was doing the quizzes, I ran into this question which I could not figure out why the answer is 5tib. Anyone could help and explain to me. Thank you very much!Your current storage pool is 10TiB. With 5 storage containers configured and a Replication Factor of 2, what is the size of each storage container?2TiB 1TiB 10TiB 5TiB Answer

Hey Guys,Can anyone give the EOL information for version 6.5?In Support portal the EOL information is mentioned as “End of Maintenance and End of Support Life dates for 6.5.Z are based on the Release Date of the next LTS Release that is an Upgrade; these dates will be published at that time.”Is it recommended to upgrade to this version since EOL information is not mentioned?

Is it possible to add three NX-8135-G8 nodes to a cluster created with three SX-1065-G5 nodes? In the document about “Product Mixing Restrictions”, there is no mention of NX and SX hardware model mixing information. Please help.https://portal.nutanix.com/page/documents/details?targetId=Hardware-Admin-Guide:har-product-mixing-restrictions-r.html Eric

I have Nutanix NX-1065 and It’s the end of support life. but I need to use it for POC and Dev Envalument. Have nutanix can upgrade to lasted AOS?

Hello Guys, I have a scenario where the current nutanix environment NX-1065-G7 AOS version is 5.20 LTS and AHV version is 20201105.2030 and we are adding new node NX-1065N-G8 to the cluster. As I referred in documentation that the current nutanix environment version is not compatible with G8. Is it  possible to image the new node with version 5.20 ?

If I wanted to migrate from VMware ESXi 6.7 (no vCenter) to Nutanix AHV, is it possible to mount my existing VMFS6 formatted datastore into Nutanix, or would I have to move all the data off temporarily, re-create it in Nutanix, and copy it all back again?In other words, do I need to buy another 3TB of storage somewhere to temporarily move my data to while I reconfigure the storage array? :)Sorry if this questions seems simple!

Nutanix NX3x50 What are the required software needed?How do I erase the previous host that downloaded a software that requires authentication before going to OS?How do I factory reset the server?How to install Ubuntu on one node, but use two nodes for computation and the other 2 nodes for backup.

Our PC (we only have the one pc.2022.6) is currently hosted on an ESXi cluster, we also have 2 Nutanix clusters running ESXi as the hypervisor.  I’m looking at moving PC to one of the 2 Nutanix clusters, as the host that PC is currently sitting on will be retired soon.  What's the best way to go about this?

Hello, warriors of the digitalOur customer is in trouble because of a big problem In order to install Windows 2019, Customer try to upload ISO files to Prism, but it keeps failing [Image of ISO file]========================================================= [Error message]================================================================Traceback (most recent call last): File "build/bdist.linux-x86_64/egg/ergon/client/legacy/base_task.py", line 468, in _resume File "/home/jenkins.svc/workspace/postcommit-jobs/nos/euphrates-5.15.2-stable/x86_64-aos-release-euphrates-5.15.2-stable/builds/build-euphrates-5.15.2-stable-release/python-tree/bdist.linux-x86_64/egg/acropolis/image/update_task.py", line 57, in _run File "/home/jenkins.svc/workspace/postcommit-jobs/nos/euphrates-5.15.2-stable/x86_64-aos-release-euphrates-5.15.2-stable/builds/build-euphrates-5.15.2-stable-release/python-tree/bdist.linux-x86_64/egg/acropolis/image/modify_task.py", line 162, in _modify_image File "/home/jenkins.svc/wo

What is the minimum number of nodes needed to configure a Replication Factor of 2 (RF2)?

Try to apply an upgrade from a Windows server 2012 R2 to Windows 2019 using Microsoft ISO image, but always fails to show this message: Has anyone managed to upgrade from Windows server 2012 R2 to Windows server 2019?I would appreciate some help about the subject. Thanks in advance. Manuel.

Hello,I'm a beginner at NutanixI regularly inspect the client's clusterncc health check, newly marked alerts, Investigate relevant kb and documentationand Enter a command such ascs | grep -v UPgsdf -hnodetool -h 0 ring From cvm===================================================================I also check IO Bandwidth Usage and Disk IOPS Is there a way to set the standard for judging these two questions to be safe?Each cluster has a different structure and environment, but I want to set a reference point How should I consider it?====================================================================Thank you for reading this long commen   

Dear SupportI tried to add Opportunity Id or Deal Registration Approval Id to Nutanix Scenario but I got error evrytimebelow photo  

Please save meThe Great Experts of NutanixI'm doing a server security check with a clientI can't find some of my questions in portal or kb documents, so I'm writing here,so I'd appreciate it if you could answer themI don't care if there's a clue. Please answer meIf there's a document, just give me a link====================================================================Nutanix's cvm is based on Linux, right?1. Can I set the limit of ip address and port for a specific host in Nutanix cvm?For example, allow access only to cvm or ip of a particular console and block the remaining ip 2. I can't set iptables, ipfilter, or tcp wrapper in cvm, right? 3. In cvm, acl (Access Control List) cannot change the setting value, right? If I can't change it, is there a reason?   

Which tool is used to reinstall the hypervisor and CVM after boot disk replacement?

Hi Team, Im trying to enable LACP on AHV cluster. Currently we have 1 cluster with 5 AHV nodes in it. I have enabled VDI pro license to the cluster. Now when i goto "network" from prism element, I do not see "uplink configuration" option at all. Please guide me what is the cause and work around. Also nutanix recommendation on lacp bond mode. can I set the bond mode to active-active ?