Solved

Nutanix lcm screen does not come out and loading continues

  • 16 November 2022
  • 10 replies
  • 1404 views
junsu
Badge +2

Hello,

I am conducting a test using NX-3050 equipment

I know it's an old Node-Model and I have previously installed it with AOS 5.20.2.1

As you can see now, we are going to test the upgrade using LCM in AOS 5.10.11.1

LCM was installed as shown using 2.5.0.2.32663 Dark-site


​​​​​I uploaded the file 5.20.2.1 because I saw the opinion that if the AOS version for upgrade is EOS,
it might not be displayed on the screen

No matter how long I wait for the LCM in the setting window, there is no screen,

 

so should I reinstall it? I think I saw the opinion that the AOS version was modified because it was low, so is it impossible to update using the LCM DARK site?

 

Thank you for reading the long article and I would really appreciate your opinion

 

 

icon

Best answer by Moustafa Hindawi 16 November 2022, 09:11

View original
This topic has been closed for comments

10 replies

Moustafa Hindawi
Userlevel 5
Badge +6

Hello @junsu 

what is the Generation of NX-3050 do you have?

 

Moustafa Hindawi | Blogger | Nutanix Technology Champion | NCSE | NCM-MCI | VMCE | 2xVCAP-DTM & DCV | 2xVCP-NV & CMA | LinkedIn: https://www.linkedin.com/in/moustafaadelmoustafa/ | My Blog: https://cloudwhales.co.uk/author/mhindawi/
junsu
Badge +2

Hi

Hindawi

Generation does not appear, and the model is only shown in nx-3050 at the prism

 

Moustafa Hindawi
Userlevel 5
Badge +6

Hello @junsu 

Could you please go to Hardware > Diagram as below:

 

Moustafa Hindawi | Blogger | Nutanix Technology Champion | NCSE | NCM-MCI | VMCE | 2xVCAP-DTM & DCV | 2xVCP-NV & CMA | LinkedIn: https://www.linkedin.com/in/moustafaadelmoustafa/ | My Blog: https://cloudwhales.co.uk/author/mhindawi/
junsu
Badge +2

Generation seems to be unknown because it's an old Node

 

 

Moustafa Hindawi
Userlevel 5
Badge +6

I think it’s G3 or earlier. I am not sure than AOS 5.20 is supported or not, please check the link below for Upgrading to AOS 5.20:

https://portal.nutanix.com/page/documents/details?targetId=Acropolis-Upgrade-Guide-v5_20:upg-cluster-upgrade-aos-c.html

Moustafa Hindawi | Blogger | Nutanix Technology Champion | NCSE | NCM-MCI | VMCE | 2xVCAP-DTM & DCV | 2xVCP-NV & CMA | LinkedIn: https://www.linkedin.com/in/moustafaadelmoustafa/ | My Blog: https://cloudwhales.co.uk/author/mhindawi/
junsu
Badge +2

Installation of 5.20.2.1 with this node was successful

yesterday I don't think it's a specialized version of AOS ㅠㅠ

Moustafa Hindawi
Userlevel 5
Badge +6

That’s a full guide for Dark site LCM installation:

https://next.nutanix.com/installation-configuration-23/how-to-configure-a-web-server-for-lcm-dark-site-on-a-linux-machine-38045

Moustafa Hindawi | Blogger | Nutanix Technology Champion | NCSE | NCM-MCI | VMCE | 2xVCAP-DTM & DCV | 2xVCP-NV & CMA | LinkedIn: https://www.linkedin.com/in/moustafaadelmoustafa/ | My Blog: https://cloudwhales.co.uk/author/mhindawi/
junsu
Badge +2

As you can see in the picture above, the dark-site has been successfully created and the files have been uploaded, but it is not displayed on the lcm screen of the prism and only loading continues

Moustafa Hindawi
Userlevel 5
Badge +6

Make sure Linux vm is CentOS 7, then do the following steps in this doc:

https://portal.nutanix.com/page/documents/details?targetId=Life-Cycle-Manager-Dark-Site-Guide-v2_5:top-lcm-darksite-web-server-linux-t.html

 

Moustafa Hindawi | Blogger | Nutanix Technology Champion | NCSE | NCM-MCI | VMCE | 2xVCAP-DTM & DCV | 2xVCP-NV & CMA | LinkedIn: https://www.linkedin.com/in/moustafaadelmoustafa/ | My Blog: https://cloudwhales.co.uk/author/mhindawi/
junsu
Badge +2

Okay, thanks. I'll try😄

Terms & Conditions