Solved

Hi Folks, I am trying to figure out if there is an option to specify the IP address details when the VM gets failover to DR site. At the primary site the VM has an IP address 192.168.11.x/24 and when the VM is failover to DR site in case of a disaster, the VM is supposed to an IP address 192.168.12.x/24. The IP address is statically configured at the primary site. Will we have to change the IP address manually once the VM is failover and powered on at the DR site or is there a way we can do it so that the VM automatically gets the IP address that needs to be set while performing the failover?

I have been deleting some VMs in order to regain storage space but I don’t see any progress on the Home/Storage Summary window. How can I refresh this information?

There can be legitimate cases where access to external storage, such as massive tape libraries, massive disk archives is needed to some, but not all VMs running in a Nutanix cluster.  These VMs would be ideally under the AHV hypervisor, but is ESXi is an acceptable alternative.  These external storage systems would likely support 10GbE iSCSI (and faster) and/or 8 gbit fibre channel or faster. I understand that supporting such external access would make the VM “special” and would restrict VM mobility to other specific nodes that were configured for similar external access. The mobility issues are a later discussion, if external storage access is possible. If the external storage was a NAS device, running NFS and/or SMB, I believe it would be straigntforward … just define the external IP address in the VM, and access the data from the VM.  The same technique could be used for external iSCSI devices, for Ethernet iSCSi.   In many cases, if the external storage needed very high performance

 Is there a way to create isolated networks within the nutanix cluster that would allow communication only for the VMs that has a NIC connected to that network? Find attached an example of what I mean if we were talking about ESXi Thanks in advance!

Hi, I am new in Nutanix Move can anyone help me to deploy it in PrismElement using QCOW2 disk file. Also I don’t have that disk file, please help to create it.

Running the checks "CVM using default password", HOST using default password", IPMI using default password", I always get green status even if the CVM, HOSTS and IPMI passwords are the default ones. Why?

Hello, after new install single-node cluster, i dont change pass for root user. # passwd root bash: passwd: command not found what am I doing wrong?

Hi Does anyone know how to use this Powershell cmdlet properly mount-ntnxguesttoll -vmid 54312c2a-2b7e-4dbe-b7ac-0fa58b575ad2 nor mount-ntnxguesttool -vmid 00054abc-11c2-77b7-2a9b-246e963f27a8::54312c2a-2b7e-4dbe-b7ac-0fa58b575ad2 work Trying to pipe to the mount-ntnxguesttool doesn’t help either. Help!!! Christopher

I just migrated a VM with Windows 2008 R2 from ESXi 6.0 to AHV but I got blue screen when I turned it on in nutanix cluster. I used move version 3.4.1 somebody knows what happened.

Hi All, I am pulling some data with the API. For example https://MYIP:9440/PrismGateway/services/rest/v2.0/hosts Results with , among other metrics, the following. Where can I find an explanation of each metric?             "stats": {                 "hypervisor_avg_io_latency_usecs": "0",                 "num_read_iops": "319",                 "hypervisor_write_io_bandwidth_kBps": "0",                 "timespan_usecs": "20000000",                 "controller_num_read_iops": "696",                 "read_io_ppm": "641128",                 "controller_num_iops": "1588",                 "total_read_io_time_usecs": "-1",                 "controller_total_read_io_time_usecs": "196391465",                 "hypervisor_num_io": "0",                 "controller_total_transformed_usage_bytes": "-1",                 "hypervisor_cpu_usage_ppm": "60000",                 "controller_num_write_io": "17846",                 "avg_read_io_latency_usecs": "-1",                 "content_cache_logical_ssd_

Hi, I am dealing with an EOL cluster (3060). I am facing recently a case where the prism element does list a vm which does not exist on the AHV. It is a fake vm.  There is no active support to ask them. Any help?    

I am reimaging my lab cluster after we had some serious problems with a conversion to AHV and rollback to ESXi.  2 of my 3 nodes reimaged fine, once I put a /firstboot directory in to the existing ESXi hosts.  My 3rd node is losing track of where the firstboot directory would be.   From the foundation log: 20200221 11:40:17 ERROR Command 'scp -i ~/.ssh/id_rsa /tmp/tmp.gkI7z6j7XG/nutanix_provision_network_utils-1.0-py2.7.egg root@192.168.5.1:./vmfs/volumes/4d501d79-cff63899-7951-75210fae7516/Nutanix ./vmfs/volumes/5e4c3359-4b398980-cc34-ac1f6bb9dd8a/Nutanix/firstboot/nutanix_provision_network_utils-1.0-py2.7.egg' returned error code 127 stdout: stderr: FIPS mode initialized bash: line 1: ./vmfs/volumes/5e4c3359-4b398980-cc34-ac1f6bb9dd8a/Nutanix/firstboot/nutanix_provision_network_utils-1.0-py2.7.egg: No such file or directory 20200221 11:40:17 ERROR Failed while copying file /tmp/tmp.gkI7z6j7XG/nutanix_provision_network_utils-1.0-py2.7.egg to host with error Command 'scp -i ~/.ssh/id_r

HI,  Is it advisable to disable Nutanix Prism Admin account after creating local user accounts with “User Admin” rights.  The purpose of this question is to increase the security level of access. Please advise. Thanks in Advance. Best, Shan

Dears We are facing VM backup with HyperV and Veritas BAckuexec, The backupExec guys are saying Nutanix HyperV is not supported because it uses SMB share ? Is that true ? what is the other options to take HyperV Vm Backups

We are running Nutanix Files v3.6.1.1 and are looking for suggestions on an ICAP server for virus scanning.  Is there one in particular you partner with or can suggest?

Invested in HCI nutanix, but corporate executives is asking me to provide the following: cost per core cost per gb (Memory) cost per gb (storage) Pricing of Nutanix is always bundled (CPU memory and storage) not per line item How do i compute?

Good Day,  I am very new to Nutanix and recently purchased a cluster. It has only been running for about 30 days now managing my network and I am in the process of make some configurations to it. I need some assistance with an error message that I am receiving. I am using AHV as hyper-visor on my 3 node cluster. On this cluster I am running 5 Windows based Server VM's (not using Hyper-V or VMware). I followed the instructions from the Administration Guide by enabling VSS Shadow Copies on the Servers, then installing guest tools on all the servers and creating a protect domain Async DR. My configurations are working and snapshots are being created for my Domain Controllers and Application Servers. However, when a snapshot is trying to be created of my File Server, I keep getting the following error.  "Warning : VSS snapshot failed for the VM(s) FS-01 protected by the FileServer in the snapshot (169035, 1563300389081879, 960) because Quiescing guest VM(s) failed or timed out. Impact    

Hi everybody, I see a “flapping” warning message for one SSD on my 3-Node Hybrid-Cluster (2x 1,92TB SSD per Node). Disk space usage for one or more disks on Controller VM ###.###.###.### is 88% which exceeds the threshold of 85%. I checked curator runs which were successfull.  From the I/O Metrics of a VM (Prism → VM → I/O Metrics) I only see the performance distribution (block size/read source usw.) for a point in time. I know Nutanix DSF handles tiering but is there a command/way to figure out which vm/vdisk claims most SSD capacity? Thanks for support, Marc

Hi all, I'm ready to take the NCSC exam but I came up against an issue ttrying o register and schedule my exam. The web page is loading without showing nothing. I've tried with different Internet access and with different web browsers but I'm still facing the issue. Could you please help?

Hi Team,  I wanted to take nutanix exam but not able to find the exam link and not to find in PSI portal as well.   Regards, Madhan

Besides the fact that LTS is Long Term Release and STS is Short Term Release, Is there any reason that STS shouldn't be used for production purposes over LTS ?I want to switch to 5.9 for the ESXi 6.7 compatibility.

My stargate contimues to restart. and I cannot find anyting in the GUI to indicate what it my be. When I get in the cli, i see the cluster says all four nodes are up. i try to ping 192.168.5.1 and the icmp request never completes. pinging all other ip’s work as expected. my esx is 6.5u3 aos is 5..5.5 my NCC is 3.7.0.1 foundations is 4.3  

I’m in the process of migrating from VMWare to AHV.  I was curious if there are any licensing changes in regard to SQL.  Do I need to just make sure that I have enough core licensing to run the actual VM or do I have to buy core licenses for every core on my entire 4 node cluster?  I heard of something called infinity that I could use to keep my VM on just one node?  Thanks for your help!

Hi there, I am new with Nutanix and I have a doubt about Acropolis licensing. We have 3 nutanix nodes with Acropolis Start Edition installed. Yesterday, my PRISM console report a License Feature Violation. Looking at https://www.nutanix.com/products/software-options , the only thing that I saw that could be wrong in my configuration was a Volume Group created for a test. Just to be sure, in an Acropolis Start Edition can we create volume groups or this option should only be used in PRO and ULTIMATE editions? The alert don’t give me more information about which feature is violating the license. Thanks in advance for the help! BR, Thelmo    

We are about to buy and 4 node box with 8*16 core processors.  On top we are going to utilize AHV Here we are going to run 2 or 3 Microsoft Operating system only Now what version of microsoft license we need to buy?