Nutanix Cloud Manager

hello Sir,Installation error please share currect ISO download link.Please find the attached for Nutanix error. 

Hello,I added a secondary Cluster to my Prism Central loaded in another site. Inside Prim central im unable to do launch Prism elements of this cluster. I get a error saying. " This action is not supported on unreachable cluster" Ports 80/9440 are open between all CVMs/Nodes and Prism central. I can see data from the cluster in Prism central, so I'm just wondering what I'm missing?

I receive the following error when trying to use a public signed cert in Prism Central:Unsupported signature algorithm detected on one or more certificates in CA chain. Please refer to the FIPS 140-2 documentation for more information. I did the same for Prism Element a few days ago and that went fine. Followed the exact same steps (minus the FQDN of course) for Central but this throws an error. What's the difference between the 2?

I am currently using Nutanix Calm API v3. After creating a crash-consistent VM recovery point using the POST endpoint /api/nutanix/v3/mh_vms/{vm_uuid}/snapshot and verifying that it exists on Prism Central, I attempted to revert the VM to this recovery point using the POST endpoint /api/nutanix/v3/mh_vms/{vm_uuid}/revert using the recovery point uuid in req body. The response has 200 status code but the task reference returned has task_uuid value of ‘something’. I also cannot see any alerts on PC indicating that the VM revert task has been attempted. May I know if anyone has experienced this issue before and how I might rectify this issue? Im not sure how to proceed since the API request appears to be successful. In particular, I would like to understand the circumstances under which Calm API returns tasks with uuid value of ‘something’. Thanks!

How to get Nutanix AHV VM bios UUID

I have attempted to create a VM recovery point on Prism Central and revert it from the recovery point. However, I am getting an info-level message that the recovery point is degraded and that the recovery Point for VM failed to capture associated policies and categories because the network name is not available for the VM.The VM revert task also does not seem to have been executed as there is no event confirming success. The VM is created from a blueprint that is part of a project with a configured VPC, and I have already verified that there are no issues in connection between PC and PE. May I know possible reasons for why this is happinening and how I might resolve this? I have consulted the link https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000CyDeCAK but it seems to be targeted at VMs running on ESXi, our VMs run on AOS/AHV. Thanks!

Beam is a multi-cloud cost governance SaaS product that provides a free, full-featured, 14-day trial period. During the free trial period, you can configure your Nutanix On-premises and public cloud accounts (AWS and Azure ) in Beam to evaluate the features. It takes about 15 minutes to configure your cloud accounts in Beam.The following section describes the procedure to start a free trial. If you have access to the MyNutanix Account, perform Step 1. If you do not have access to the MyNutanix Account,  perform Step 2. Procedure If you have access to the MyNutanix account, do the following. Login to your MyNutanix account. In the Dashboard, scroll down to find the Beam application. Then, click Launch to open the Beam application and start your free trial. If you do not have an existing MyNutanix account, do the following. Open the Beam webpage. Click Start Free Trial and fill the form that appears. Then, click Submit. Your MyNutanix account gets created. Also,

Hi,I want from PRISM API to modify the subnet and Mac Address of a VM.Is it possible to do that by PRISM API ?I tried something like this by this URL [https://PRISM_URL:9440/api/nutanix/v3/vms/c7956715-db3d-48ef-b9df-f2ffcd433a1c]{ "spec":{ "name":"T0-SRV1" }, "resources":{ "nic_list":[ { "uuid":"d7684227-25a9-485b-a064-1789276617c3", "mac_address":"50:6b:8d:ab:0e:dd", "subnet_reference":{ "kind":"subnet", "name":"TEST0-SUB", "uuid":"c8c4ee2b-a39f-466b-9cc4-2ccce4ebea79" } } ] }, "metadata":{ }}But i get this message :{ "api_version": "3.1", "code": 422, "message_list": [ { "details": { "": [ "Additional properties are not allowed (u'resources' was unexpected)" ], "metadata": [ "'kind' is a required property" ], "spec": [ "'resources' is a required property" ] }, "messag

Hi to all,I’m trying to deploy systems using nutanix calm and blueprints, the guest vm are windows server 2019. Is possible changing the hostname of windows using the vmname generated by blueprint?Thanks in advance

Hi everyone, i have a trouble with this error: the alert also sent a notification about this error: Discovered that the nucalm internal service is not working: “helios” I restarted all cluster service but there is no change. Then i checked my nutanix docker to log infomations about that, it showed helios still was running. And i follow KB-8621 to collect log of helios.log.1 with the same time in alert, it showed:So anyone can tell me what is the problem with my Calm service? I so appreciate to receive your helps.

Article #000001842

I turned on a trial of calm in my cluster, but never really did anything with it.  I’ve searched and searched but I’ve been unsuccessful in finding how to disable it. Can someone point me in the right direction?Thanks!

HiNutanix 6.6.2.5Installing Prism Central (1-Click Internet)When I deploy PC, then there is an option, as either:Small Large X-LargeWhen I selected small. Then I get 1.VM with “6 vCPUs, 26 GB of memory, and 500 GiB of storage.”I deploy it. And after there is an option to “Scale out PC”. I can scale out to 3-VM, so I get 3x “6 vCPUs, 26 GB of memory, and 500 GiB of storage.” But my question is, can I scale out from Small to Large as well ?And also from Small to X-Large..?Or I need drop my PC to achieve that..? I am new to nutanix. And I would like to know, which is the best approach for later on, when there is a need to expand.Also, as I have read, the Flow Virtual Networking requires “Advanced Networking”, which needs X-Large deployments.We might need that option later on. So I want to know, should I need to create X-Large deployment now, or can I change it later on. Thanks. RegardsRaul

Hi,I would like to know if there is any command to get the resilient capacity of a cluster, from nCLI/API. The resilient capacity is usually seen in the prism element → storage summary ->view details. Please help, also let me know if any alternative method, to get the resilient capacity for the cluster.Thanks,Arun

Hello, I am trying to create a vm that will use UEFI and Secure boot with the new powershell cmdlets. With the version 1 cmdlets this was not possible. Does anyone know if this is possible with V2 or are we still required to use the API along with the powershell cmdlets?

I find that I am stuck between a rock and a hard place all of a sudden. I have been using the original Nutanix PowerShell cmdlets (Add-PSSnapin NutanixCmdletsPSSnapin) for weekly inventory scripts.  I also have a script for deploying new VMs from images that use these cmdlets. Our production Prism Central is pc.2022.6.0.3 and I can still login to that just fine (Connect-NTNXCluster).  However, we are having numerous issues with that build and support has advised they have been resolved in the newest build pc.2023.1.0.1. We have a test Prism Central instance with one test AHV cluster.  Yesterday we updated that to pc.2023.1.0.1 and now I cannot connect with the cmdlets. Scripts> Connect-NTNXCluster -Server $PCentral -Username $MyCreds.Username -Password $MyCreds.Password -AcceptInvalidSSLCerts -ForcedConnectionConnect-NTNXCluster : Invalid JSON primitive: Authentication.At line:1 char:1+ Connect-NTNXCluster -Server $PCentral -Username $MyCreds.Username -Pa ...+ ~~~~~~~~~~~~~~~~~~~~~~

my goal to integrate beam with my billing system over API, can i add custom attribute to Nutanix resources ?exampleif i have VM created from image template with 4 vcpu and 16 GB memory, can i add an attribute  as resource name like AWS "t2.micro"?

Hi AllCurrently a new version has been released for prism that is pc.2022.9 . In which, it has been mentioned that Microservice infrastructure would be enabled by default and it is mandatory as well for this version .Can anyone confirm that enable of microservice infrastructure requires separate license as in my current infra i dnt have Microservice infrastructure enabled and i dnt require it also .[I am using ESXi as a hypervisor] .Also, is there any way old version of Prism[PC.2022.6.0.1] can be update to this pc.2022.9 version without having Microservice infrastructure enabled ?

I’m trying to secure webhook communication. I’m using PRISM Element. My callback server uses https and has a web-server certificate installed issued by a local CA. First question is, which CA certificate will PRISM use to validate the callback server certificate? Is it the same CA certificate used for the PRISM web server? Second question, how does the callback server verify that the webhook effectively originated from PRISM? Is this mutual TLS or is there another method? If mutual authentication, what certificate does PRISM use for this?

When I want to do inventory in LCM using PC, the error showed as shown below:  Anyone know how to fix it?

When building Packer images the temporary images don’t delete after completion.  This is working on other clusters, but this specific one we get an error: Having same exact issue as this: https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/cannot-delete-image-error-app-blueprint-template-39267, but the links don’t provide any insight in how to fix.Versions AOS 6.5.1.6 Calm 3.6.0 PC pc.2022.6.0.1    

I'm curious, what is the maximum number of Playbooks that can be supported by Prism Central?And how many actions we can add in one playbook?

Elevate Your Reports With GroupingWith Nutanix Cloud Manager you can create your own custom reports with either custom or pre-defined views. (To learn more about reporting basics, check out this video)In the video below, I show how you can use the grouping functionality to group all your views by a specific entity using the custom group view. After watching the video, keep reading to learn more about different ways to use grouping!There are two ways to group entities: Custom Group View Group Data within a Custom View You can use the custom group view either by selecting all the existing views and clicking on Create Group, or adding a group using the custom Group view and adding views to that group.There is also the ability to group data within a custom view itself. For example, if you wanted to create a line chart to display VM memory usage, you can group by cluster within this view under Advanced Settings.So what’s the difference?When grouping data within a view, you will see a sepa

Hi, I would like to ask if anyone has configured NGINX as a reverse proxy for IAM/Providers page. I tried configuring mine using the NGINX configs posted here in this forum, but I am unable to click onto the links when I am redirected to the IAM/Providers page. Appreciate if someone could provide some valuable inputs on this.

Hello,Prism Central documentation supports OpenLDAP 2.4 release running on CentOS distributions only.Question ....I take it that Red Hat LDAP is not supported in Prism Central, correct?Can I only use OpenLDAP 2.4 with CentOS and cannot use OpenLDAP 2.5.13 (LTS) with CentOS?In Prism Self Service (Calm) documentation I find reference to Active Directory.Question ...In Calm can I work with OpenLDAP or only with Microsoft Active Directory?In a cluster with Prism Central + Prism Self Service (Calm) do I have to implement Microsoft Active Director only?