Solved

Issue resolved, but alerts persisting with old time stamp. alerts ware generated during network maintenance, now all ok need to clear logs, need procedure to clear the old alerts.

I just created 4 new Server 2012R2 VMs and this morning I see yellow exclamation points on them with the message "VSS snapshot is not supported for the VM 'WinSrv12R2', because VM has IDE disks attached" These were created with 100G SATA drives and a SATA CD-ROM so I cant figure out why I'm seeing this message. Thank you

I recently had an individual VM whose CPU spiked to between 94-98% for roughly 6 hours. I'd only caught it because the user finally called in and said their VM was slow. In Prism it wasn't showing a warning at all, but I could very clearly see that the CPU was pegged. I wondered if there was any way to set up an email alert for if CPU/RAM at the VM-level has sustained utilization above a certain threshold?

Hi. We have a large grouping of VM's that are not always required to be running and would like to find a way to shutdown these particular VM's on a sunday night. Now anyone know how to find a group of VM's (either via label, project, category etc) and pass a shutdown command. Ideally I would like to do this via PowerShell but I will take anything.

I've written a PoSH script which does the following. [list=1] [*]Authenticates to Prism Central V3 API [*]Calls /category/query API to get a list of VM uuid's that are members of the PROD category. [*]Write this list of uuid's to a string [*]Connect to the NTNX cluster using Nutanix PowerShell cmdlets. [*]Iterate through the above string and execute Set-NTNXVMPowerState against the uuid's. [/list] Steps 1 - 4 work as expected. Step 5 seems to iterate through the list as it should but when I put in the Set-NTNXVMPowerState command to be executed, it throws an access denied error. Once the script gives the error, the powershell connection looks like it locks the account and you cannot execute any commands. If I comment out the foreach loop, and just execute a normal PoSH cmdlet (after the Connect-NTNXCluster) such as Get-NTNXClusterInfo, it works fine. I have tried both my account (which has Prism admin rights) and the Prism Central admin account with no luck. So 2 q

In a Nutanix Cluster, if we have three hypervisors (say VMware / Hyper-V / AHV) if the AHV node is down, can the VMs from AHV node failover to Hyper-V or VMware hypervisors available in the same cluster in commercial edition of Nutanix.

Hello. I am trying to connect to the /iso/ folder to clean up some of the old versions. I also connected some VMware Datastores that I should probably do some housekeeping as well. I connect to the cluster primary IP 192.168.1.100 and get access denied. It's the same nutanix username & password I use for SSH which works fine. [img]data:image/png;base64,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

# On March 4, I posted the following but I have written the wrong answer myself, and the status of that bank has become "solved". # Actually it remains unresolved. I will post it again because I want to resolve it by all means. # The problem is "CVM can only communicate with AHV". Dear All, I am trying to build Nutanix CE into the environment of Nested ESXi. I downloaded and prepared the latest version of ce - 2018.05.01 - stable.img.gz. The ESXi to build the AHV is 6.0. First of all, we started to work as a single node cluster, we plan to develop into a 3 node cluster if it works. 192.168.0.27/24 to AHV, GW: 192.168.0.254. I set up CVM 192.168.0.28/24, GW: 192.168.0.254 and started the installation. After waiting for a while, a message stating that the installation was successful is displayed and the message "Nutanix CVM IP: 192.168.0.28" is displayed. However, only AHV can communicate with this CVM, and it can not communicate with other devices on the same subnet. If you che

I am trying to access the console of a VM in AHV. I have powered on the VM. While trying the button 'launch console' , the screen becomes grey for a moment. But I don't get the console. I tried this using chrome and firefox.

Dear All, I am trying to build Nutanix CE into the environment of Nested ESXi. I downloaded and prepared the latest version of ce - 2018.05.01 - stable.img.gz. The ESXi to build the AHV is 6.0. First of all, we started to work as a single node cluster, we plan to develop into a 3 node cluster if it works. 192.168.0.27/24 to AHV, GW: 192.168.0.254. I set up CVM 192.168.0.28/24, GW: 192.168.0.254 and started the installation. After waiting for a while, a message stating that the installation was successful is displayed and the message "Nutanix CVM IP: 192.168.0.28" is displayed. However, only AHV can communicate with this CVM, and it can not communicate with other devices on the same subnet. If you check the Arp Table of another Linux machine on the same subnet, the correct MAC address of CVM is registered but the MAC address of this Linux machine is not registered in the Arp Table of CVM side. Only the MAC Address of AHV is registered in the Arp Table of CVM. CVM can not communic

I'm trying to add a new vCenter target but I get this error : [img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/65ab230d-11ed-4f9a-84ca-b1c95a347187.png[/img][img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/79a2efa6-c66f-4276-b600-f05fa57578ca.png[/img][img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/2cfe75e8-b65e-49d8-9afc-f9af78b8e702.png[/img]

trying to find the mobility installer?

I have a problem with arp requests on the bridge for guest traffic In the drawing below the current architecture. If a request arrives from the outside, passing through the firewall, and the firewall is starting to communicate to a VM connected to a NIC to BR1-UP bond of BR1 bridge, the ARP request for the resolution of the VM address stops at the bridge BR1 and do not reach the VM, in this case the firewall and VM ARP tables remain unpopulated and the communications stop. On the other hand, if the communications depart from the VM to the Firewall (for example with a ping) the ARP request is processed by the firewall and the ARP tables of firewall and VM are correctly populated with the respective MAC ADDRs. Firewall IP and VM IP are in the same broadcast domain, no routing. I checked with Wireshark on the windows VM, with tcpdump and ovs-appctl fdb/show on the Nutanix host and when the communications start from the firewall the ARP request goes up to the physical card of the BR1

I tryed to run xtract but I'm facing a problem to install the VirtIO tools. Using the automatic script on xtract it's end with the error: "ExitCode: '1603'". If I try to install VirtIO manually the show this message "ended prematurely because of an error. Your system has not been modified". Creating a verbose log file, from the installation, I see some errors like this: MSI (c) (08:18) [22:06:00:591]: Package to be registered: 'Nutanix-VirtIO-1.1.3.msi' MSI (c) (08:18) [22:06:00:591]: Note: 1: 2205 2: 3: Error MSI (c) (08:18) [22:06:00:591]: Note: 1: 2262 2: AdminProperties 3: -2147287038 or Action start 22:06:00: PrepareDlg. MSI (c) (08:50) [22:06:00:623]: Note: 1: 2205 2: 3: Error MSI (c) (08:50) [22:06:00:623]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 2898 Info 2898.For WixUI_Font_Normal textstyle, the system created a 'Tahoma' font, in 0 character set, of 13 pixels height. MSI (c) (08:50) [22:06:00:623]: Note: 1: 2205 2: 3: Error MSI

I've inherited a Nutanix setup. I've noticed there is 1 Storage Pool setup and 4 Storage Containers. (see screenshot).  I don't know what is the Default setup looked like so I don't know which are required. I'd like to have 1 container. Currently attached to Nutanix Host VDI_POC nutanix-peristent-pool Not attached NutanixManagementShare SelfServiceContainer All of my VMs are on the VDI_POC. Can I somehow delete the other 3 and combine them into the VDI_POC without losing data/downtime?  

We have a scenario in which we are running VMware vSphere environment on existing servers and planning to deploy a DR site. Is it possible that we deploy a Nutanix AHV environment at the DR site and replicate from the existing ESXi environment at the Production site to the Nutanix DR site somehow? We are currently using Veeam backup and replication for VMware for backup. What is the possibility of such a requirement?

Hello, We have an 5.1 AOS cluster (EOL I know), we wish to upgrade to latest possible LTS (which seems to be 5.5.8). The ncc is clean but the preupgrade fails at 3°% claiming a zookeeper is not reponding on one of the CVMs. But allssh genesis status | grep zookeeper zookeeper: [3967, 3996, 3997, 4003] Connection to @1 closed. zookeeper: [3899, 3928, 3929, 24979, 25089, 25105] Connection to @2 closed. zookeeper: [3919, 3948, 3949, 7259, 7365, 7380] Connection to @3 closed. zookeeper: [3923, 3952, 3953, 7709, 8032, 8047] Connection to @4 closed. And [code]ncc health_checks system_checks zkinfo_check_plugin [/code] runs normally. What could be the issue? Thank you

Hi, I'm trying to create a schedule for an existing Protection Domain like this: [code]def createProtectionDomainSchedule(self,pdname): # Set the schedule for the protection domain try: policy = {"retention_policy": {"remote_retention_type": None, "remote_max_snapshots": {}, "local_retention_period": None, "local_max_snapshots": 1, "remote_retention_period": {}, "local_retention_type": None}, "start_times_in_usecs": [1549477620000000L], "rollup_schedule_uuid": None, "user_start_time_in_usecs": 1549477620000000L, "is_rollup_sched": None, "pd_name": pdname, "values": None, "suspended": False, "app_consistent": False, "end_time_in_usecs": None, "type": "DAILY", "id": "63c037e5-41e4-4630-8641-23509a5360a1gg", "every_nth": 1} protectionDomainURL = self.base_url + "/protection_domains/"+pdname+"/schedules" serverResponse = self.session.post(protectionDomainURL, policy ) print serverResponse.text return json.loads(serverResponse

A customer asked.... Is there a sort of table to compare the Acropolis version with che KVM corresponding one? Thank you!

I have a scenario where I only have the vmUUID available to me and the NGT tools aren't currently installed on a VM so it appears to be limiting what I'm able to do with the API. Is there a way to retrieve a VMs vmID using the vmUUID?

Is there any API to get VM UUID given VM name or any work around to get that? Is it possible to delete a VM given only VM name with API? Thanks in advance. Regards, Pawan

Hi , Anyone would know if RHEL is supported to run on Nutanix Acropolis Hypervisor (AHV) ?

I have windows 2012 r2 VM but I forget the windows administrator password. When I'm trying to reset the password from recovery command line using below command. [list=1] [*]X:\sources [*]d: cd windows\system32\ren utilman.exe utilman.exe.old [*]copy windows\system32\cmd.exe utilman.exe. [/list] Usually above command will work for normal physical windows server , ESXi Guest vm's to reset the local administrator password. ** In nutanix recovery command line I am unable to view my actual OS disk. Is there any way, How can i view my guest VM os disk on recovery mode. ?

How to change expiry of nutanix snapshot?

Can you please help me with below questions 1.How prism master/Acropolis master will be elected ? is there any criteria to become a leader ?