Solved

This is the scenario I have:We have a four node cluster running Hyper-V. We want to migrate/reload/replace with AHV. There is nothing on this cluster that needs to be preserved.I tried the Foundation Portable application, but it does not seem to discover the nodes. I suspect that is because they are neither bare-metal nor factory imaged at this point. (based on this article - https://portal.nutanix.com/page/documents/details?targetId=Field-Installation-Guide-v4_5:Field-Installation-Guide-v4_5)This is a “retail” cluster, so I do have support. I just don’t know if it’s appropriate to tie up a support engineer for the time it would take to reload a cluster. So I was hoping to at least get started on my own. I did some googling and searching here and the KB. But I suspect my search terms are either too broad or maybe even far too specific. All I get back is how to setup a brand new cluster. 

Hello! I’m pretty new to this Nutanix world. Have been dealing with standard server+storage for more than a decade. We have 2 clusters here, with 3 nodes in each site with metro availability. There are 3 protection domains active in each site (active) that are replicated to the other site (passive) and vice-versa.    Site1: Node1 - Node3 - Node5 PDs site1 (active): PROD_001, DEV_001, INFRA_001 PDs site1 (passive): PROD_002, DEV_002, INFRA_002   Site2: Node2 - Node4 - Node6 PDs site2 (active): PROD_002, DEV_002, INFRA_002 PDs site2 (passive): PROD_001, DEV_001, INFRA_001   In vCenter cluster configuration we obviously have affinity rules for VMs/Hosts in site1 and VMs/Hosts in site2, preventing the VMs running in “odd” nodes from being stored in “even” nodes. Sometimes we have to migrate VMs from one site to another. So we do a complete vmotion (compute and storage). After the migration, we start to constantly receive alerts with this message: Snapshot status for vstore INFRA_001: Faile

Recently, we upgraded AOS and AHV in a 6-NX-1065-G5 nodes cluster. Those nodes have only 1 Gbps interfaces and the upgrade process got stuck many times while actively moving guest VMS to other nodes when setting each node to maintenance mode. Tech support told us this happened because new AOS and AHV versions were designed to work at 10 Gbps, which we know is a best practice, but a hardware upgrade would be needed in our scenario then.Question: I´m guessing configuring the four uplink interfaces as Balance-SLB bond may help, having a total bandwidth of 4 Gbps in optimal conditions, Has anybody gone through this problem and applied this cure? Was it useful or… Not enough? Thanks in advance

Hi Team,I want o schedule NCP 5.15  Exam. I need to Schedule an exam NCP 5.15 I need to provide me with access information , is this normal to take all this time to send access information please help.Thanks

Hello NTNX Team,My exam was scheduled for today and logged in to nutanix university then nevigated to the Take exam but unable to connect to psionline.com. I tried for almost 40 mins but no luck .exam Time was: 18:00 -20:00 IST (+5:30 GMT)

Hello All, How should I provide SMTP Server settings when the mail server is in the cloud (Office365) ?As shown below, I tried with this mail server smtp.office365.com but the “email test” failed : Thanks in advance.

Hi everyone, I need some help.I'd like to see the output of several Prism Element API calls in the Nutanix/ESXi hypervizor environment.curl -ks -u 'user:pass' -X GET 'https://<prism_element_ip>:9440/PrismGateway/services/rest/v2.0/cluster'curl -ks -u 'user:pass' -X GET 'https://<prism_element_ip>:9440/PrismGateway/services/rest/v2.0/hosts'curl -ks -u 'user:pass' -X GET 'https://<prism_element_ip>:9440/PrismGateway/services/rest/v2.0/vms?include_vm_disk_config=true&include_vm_nic_config=true'We are developing a monitoring/reporting tool for multiple platforms. We have recently added support for Nutanix as well. It works fine with AHV but we don't have access to a Nutanix/ESXi config.Thanks and regards,P.

Hello,I  am trying to create a VM of cisco ACI so that the network team can practice on. but while installation it keep showing this error and start the installation from the begining again. i don’t know what did i do wrong please any one can help. 

 Hello All, I was trying to deploy Nutanix AOS 5.15.1 and HyperV2016 on 03 Lenovo HX-2321 nodes using Foundation 4.5.4.At the first time, the deployment failed with this message : "Fatal running pre-install sanity tests" for each of the 03 nodes. Please see below all the related log messages :==================================================================2020-08-18 17:02:12,832Z DEBUG Setting state of <ImagingStepValidation(<NodeConfig(10.105.254.200) @b390>) @be70> from PENDING to RUNNING2020-08-18 17:02:12,838Z INFO Running <ImagingStepValidation(<NodeConfig(10.105.254.200) @b390>) @be70>2020-08-18 17:02:12,845Z DEBUG Cache MISS: key(<function common_validations at 0x0399D2B0>_()_{'global_config': <foundation.config_manager.GlobalConfig object at 0x0518B890>})2020-08-18 17:02:12,845Z INFO Validating parameters. This may take few minutes2020-08-18 17:02:12,845Z INFO Validating parameters. This may take few minutes2020-08-18 17:02:12,846Z INFO Val

Hi Cloud builderWhile I was reading the NTNX Bible they said that the VM snapshot being taked by freezing the VM, unlikely with ESXi where the VM is stunned » Delta created for I/Os and then VMDK is consolidatedMy question while on NTNX Platform how/when the I/O takes place while VM is being snapshot’ed while its freeze.

Is there a way with NTNX Powershell cmdlets to collect software inventory data for all registered clusters? Something like;Cluster Name AOS version Foundation version NCC version Hypervisor versionThanks!

Hello all, i have managed to configure the 3 node cluster with AHV and all of the were working at first but after 2 days one cvm has been down can’t communicate with others.i have tryied to fix it but i couldn’t.both the AHV and host ip does reply for ping but the CVM dosen’t.i have run the NCC and got the log but it only says there is a duplicate ip but when i check for duplicate ip there is no duplicate ip in the configuaration. i have attached the NCC report incase you want to see it.any help will be greatly appretiated. thank you in advance.

Hello, i have a running nutanix 3 node cluster in my environment all is good. the problem is when i create a VM and launch it i the OS starts with without the network adapter i have added 1 Disk and also 1 virtio and also the OS in separate disk configuration. i have the screenshot of the configuration please tell what did i do wrong. 

What are the commands to shutdown and delete guest VMs?

Are there any recommendation for protecting Prism Central - I’m actually using PC Scaleout so have 3 PCVM’s and am curious if I should place these in a Metro or Async Protection Domain in the event that we perform a datacenter failover.I know that this cluster wouldn’t be critically needed in such a scenario but it would be nice to have. Any pro’s/con’s to using either PD type (Metro vs Async) for this?

Hello all,Is it possible to install the french version of Windows server 2016 using nutanix foundation ?I wonder this because in the iso whitelist, I only see english versions of windows server 2016 as supported versions.Thanks.

Good afternoon, all!I’m setting up a Move project to migrate some VMs from Hyper-V to AHV. In the 3.6 Move user guide, it says “You need PowerShell version 4.0 or later.” Do we need it on each source VM, on the HV hosts, on the management workstation, or all three?Thanks to all for looking! Gregg

HelloI am interested in the possibility to get a VM memory dump for further analysis (list of processes, sockets, other artifacts). How to do it if using the KVM hypervisor (Acropolis).I need to create a dump on a running VM for analysis. A detailed description of the procedure is required. If I understand correctly, all VMs in Nutanix are kept in the form of files, which files are VM dump files? Оr does Nutanix have a special procedure for creating and downloading a complete dummy file(s) of a virtual machine?OS doesn't matter, it can be anything.Please tell me the information to understand this issue.

In the process of installing the nx-8235-g7 equipment, the foundation cannot perform IPMI MAC ADDRESS DISCOVERY.When the installation was powered on, it was booted into Phoenix.iso and the IPMI IP setting was possible, so the installation was possible with the foundation. Is there any change in IPMI MAC DISCOVERY method from G7 equipment? And when the equipment is received and powered on, it boots into Phoenix.iso. Can you know what this is?And starting from g7, is the IPMI DEFAULT PASSWORD indicated by a sticker on the back of the device where the ipmi ID/PASSWORD is not ADMIN/ADMIN?

I have a Nutanix Node - Dell XC740xd with 4 Tesla T4 GPUs installed.  I am Running AOS 5.15.  It seems my GPU is in passthrough mode, and I would like to switch this to vGPU mode.  Does anyone know how to do this?              "status": "UNUSED",              "assignable": true,              "vendor": "NVIDIA",              "name": "Tesla T4 compute",              "index": 0,              "max_resolution": "None",              "num_vgpus_allocated": 0,              "pci_address": "0000:86:00.0",              "fraction": 0,              "mode": "PASSTHROUGH_COMPUTE",              "num_virtual_display_heads": 0,              "guest_driver_version": "None",              "frame_buffer_size_mib": 16384,              "device_id": 7864

We need to migrate one VM (a virtual appliance) from one AHV to another with no p connection between the two The AHV versions are different (Euphrates 5.5.8 and Euphrates  5.9). What is the best way to accomplish this.?

when i try to schedule NCP 5.10 exam i get below error message. If any help it will be great.Account Incomplete!You will not be able to access certification exams until this issue is resolved.Please contact university@nutanix.com for assistance.Go to Home Page.

 I need to define a NIC for my windows substrate as a variable.current workflow:User selects subnet string from predefined variable >Pre-Create Parses and sets the subnet variable to the json from previous step. The NIC can be connected toone of n(x) subnets that are defined in the following escript:subnet1 = { "name": "name", "uuid": "redacted_uuid" }subnet2 = { "name": "name", "uuid": "redacted_uuid" }subnet3 = { "name": "name", "uuid": "redacted_uuid" }subnets = { "Preprod": subnet1, "Preprod": subnet2, "Prod-IaaS": subnet3 }print("{}".format(json.dumps(subnets.get("@@{appSubnet}@@"))))Output: @@{setSubnet}@@Profile Configuration:  This is where it breaks: 

Hi Guys,Nutanix today posted on their twitter feed that they are providing free certification by attending their upcoming .NEXT Digital Conference.Following is the link, on the link their is a discount code:- NEXT2020FREENow when i am scheduling exam, it has redirected me to this link  https://www.nutanixuniversity.com/pages/41/take-an-exam  on this link i am unable to find any nutanix exam, how do i search for my exam or how do i schedule my Nutanix NCP exam with above given discount code or without it.I would be glad if someone could guide me, as i already tried & still trying but no success.Thanks in advance, hopefully someone can guide me or a provide a link where i could step by step details.https://www.nutanix.com/support-services/training-certification/next-2020-exam  

I wonder if there is any limit on the number of NICs (VLANs) in a guest VM using AHV \ AOS?As well as, what would be the implications of a VM with multiple NICs, for example, over 20 NICs.