Solved

On cvm, the cs and cluster start commands are output to the next screen.Hypervisor : ESXI 6.7U3AOS : 5.15.4What's the problem?

As seen in this attached screenshot, Prism Central appears to have lost track of this “running” task.  Updates of network security rules normally finish very quickly (I think might have clicked an apply button twice after editing a FLOW security policy during on-site FLOW training.)  Is this something only Nutanix Support can clear away? 

I just updated a cluster’s AOS and am now getting the warning:AHV version 20190916.360 is currently installed on host, while minimum compatible AHV version is 20190916.410But I cannot AHV without updating also AOS to 5.19.2 which would change my plan to STS (currently installed 5.15.5.1 LTS)So I have to ignore the warning and waiting for a compatible AOS LTS version, or should I change to 5.19.2 STS?

What problems or impacts can I have after upgrading the Prism Central to a version that is not compatible with the AOS of the sites that are managed by Prism Central?Will I have any unavailability to access the PE of the remote site via the web because of the version that is not compatible with Prism Central?For example I will update the PC to version pc.2020.11.0.1 and AOS of my PE will be in version 5.11.2 which by Nutanix matrix is not compatible. I cannot update the AOS of the EP at this time.

I have a server that no longer needs one of its 2TB disk. I know how to remove the disk from the VM but, how do I remove that VMDK from the Nutanix Storage container? Is there a way to browse it and then delete it?  2TB is a lot of space that I would like to reclaim.

Which node type does not deploy a Nutanix Controller VM. A bit confused with documentations available some say “Compute only” and other say “All Flash”One more question A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called.

Hi,we just upgraded our prism central instance to the most current community edition version of Nutanix (2020.09.16). We also upgraded our cluster successfully. For this to happen I had to unregister the cluster from prism central first (with the help of: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000XeZjCAK). After everything was updated I wanted to register the cluster again in prism central, but after some time I get the error message “Error: Failed to create remote connection”. I found this KB article: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e0000009BwxCAE and executed all the steps therein (which are mostly the steps I already had done), but the issue persists. On the prism central VM I can see the following entries in the “prism_gateway.log” file when trying to register the cluster: WARN 2021-05-12 15:17:55,410Z http-nio-0.0.0.0-9081-exec-8 [] commands.auth.PAMAuthenticationProvider.checkFailedAttempts:395 Failed to check th

Hello!Our customer "ASSA" have recently deployed a new nutanix node (NX-1175S-G7) , this new node is already on rack and cabled to the respective switches.We have 3 nodes on NX-1065S and 1 node on NX-1065-G6AOS Version: 5.9.2.3The problem is:-On Prism > Hardware > Overview i can see 1 new discovered node-But when i click on "Expand Cluster" it doesn't show this new node to do the process I tried the command: ncli cluster discover-nodes with this result:nutanix@NTNX-16SM13440170-A-CVM:10.63.4.16:~$ ncli cluster discover-nodesArch : x86_64Cluster Id :Controller Vm Address :Controller Vm Gateway :Controller Vm Netmask :Current Network Interface : eth2Foundation Version : unknownHypervisor : phoenixHypervisor Address :Hypervisor Gateway :Hypervisor Netmask :Hypervisor Version : phoenix-4.6.2_6e9b7fc8Ip : fe80::2e0:edff:feda:671c%eth0Ipmi Address :Ipmi Gateway :Ipmi Netmask :Node Position : ANode Uuid : e29c0c0e-7e41-4a96-88d8-f4696d456043Nos Version : 0.0Rackable Unit Model : NX-1175

I was trying to get AlienVault (OSSIM) to run on Nutanix, but I have hit a road block. I was able to get the install dialog to run after setting the boot to legacy bios. However, after install, It fails to boot.My questions, do any of you use any open source SIMS solution that works in Nutanix?I could accept a SIMS solution at a cost. However, after going through sales with LogRythim and splunk, I was frustrated because both of them incure log ingestion fees. We may have a good budget, but we are limited with our operational cost.Thanks for any assistance you can provide.

I’m asking about the version of VMFS datastore for ESXi hypervisor on Nutanix cluster. I’m trying to create new VM with a disk larger than 2 TB with no luck of success, after some google searches seems this issue could be due to VMFS3.

Why need volume_group_uuid when i create a new Volume Group???how to get the volume_group_uuid?

Hello Nutanix community. I have problem with upgrading my AHV version. I attached error screenshot. How can i solve this problem without any power off, reboot or other actions? Because it production environment. Thanks

Hi All, i need to export the *.nutanix.local cert in a text format, does anyone have the commands to do this?

I will upgrade AOS version from 5.10.6 to 5.15.5 on Dell XC640 that hypervisor version is vSphere6.7 U2.Can I rollback AOS version If upgrade process occurs any trouble? Please give me any manuals if do you know that.

I’m just getting started with Move. We need to move VMs from an ESXi cluster to a new Nutanix AHV cluster. The ESXi hosts are managed by vCenter.Do I start by deploying the Move appliance in vCenter or on the Prism Central or PE?The Release Notes for 4.0 show our versions of ESXi, vCenter, AOS and Prism Central are supported.

I would like to run a command from a host to gather the info just allssh does on cvms. I would like to avoid login into all the host and run a quick check from any of them. is there any easy way to do that?I read about hostssh command but my bash is not able to found it.

Is their any one who have any dump or any valid resourse i can use for NCS-core exam i was in a trouble to prepare my self for it and i couldn’t reschedule the exam now.any one who can help is welcome

Hi All,Does Nutanix Move support to move from google cloud platform (GCP) workflow to Nutanix AHV (On-premise)? Is there any alternative way for this?

Hi.I’m the first to admit that I read the documentation for Calm a bit too quickly and didn’t really reflect on the meaning of “The Prism Central in which Nutanix Calm is running is registered with the same cluster.” and “Nutanix Calm is supported only on AHV and ESXi hypervisors on a Nutanix cluster.”After trying and failing to run this on an existing VMware cluster, that the Prism Central/Calm installation doesn’t own, I re-read the documentation and realized that I’d glossed over the actual requirements.I mention this to clarify that this isn’t a post about unclear documentation or incorrect requirements. I goofed, as simple as that. :)What I do want to know though is why these requirements exist. I have talked to my contacts at Nutanix and I so far I haven’t got a proper answer to this question.Can anyone please explain, in detail, why I can’t run Calm on an arbitrary VM?

Hi,I just passed NCP-MCI 5.15 and i am looking to enhance my knowledge on Nutanix further. In Nutanix technical Certifications section I do not see information about NCSE-Core.I would like to know below things before I plan for my further study around Nutanix:1- What is the difference between NCP-MCI and NCSE-Core? are these two different paths?2- After NCP-MCI, what is the further path of study/certification? [It seems Nutanix have NCM and NCX after NCP]

Hi.I’m trying to assign users to the built-in roles in Prism Central, for example Super Admin, but I’m not allowed to.This is the exact same issue as @skeeter reported on 5 months ago in this thread.Is this still considered a bug that requires me to open a support case?

Are there any updates as to when Nutanix may receive virtual audio from the VM?I was wondering if it got any traction since the kernel update (AOS 5.19) was released. Thanks,College student

Can someone explain the difference between the two ?? and what are the pros and cons of them

I cant find much information on single node clusters other than requirements, limitations and how to create. Is there a management guide ? stopping starting destroying etc.

Hi i need to download AOS 5.10.0.1 LTS