Solved

I’m tuning RBAC to provide Self-Service users with just enough permissions for CRUD operations on VMs and Recovery points using the API and custom roles.When trying to create a VM, I see the following message with the “VM Template” radio button greyed out: There are currently no VM templates available in the projects that you are a part of. So, where is the association of VM Templates to a project? I created a couple of VM templates by creating the required images and adding them to the catalog. Is there some special permission required for this (because playing with RBAC has made this greyed out)? 

Good morning All   I have a bit of an NGT issue, the Prism Central alerts me to say some VMs need a NGT upgrade, when I go to upgrade them I see the message “NGT can only be upgraded on 0/1 VMs which have the available upgrade of NGT”   Review and confirm buttons are greyed out so I cannot continue - what does the message mean and what do I do to get it to work?   Many thanks   Eric

Looking at the site below, I understand that ESXi 7.0 is supported. But I'm not sure if vCenter 7.0 is supported.https://portal.nutanix.com/page/documents/compatibility-matrixIs it a problem to use vCenter 7.0 ?Also, where can I find out which vCenter versions are supported?

I am trying to move a VM from EXSI to AHV. When I try the move I get the error “VMTools is not running.” any suggestions?

Hello, I tried to change the Prism admin password today, but the admin account keep locked automatically. So every time I have to reset the admin account from a CVM, but it gets locked after 5 minutes.  

I was wondering what best practice is for defragmenting guest OS on a Nutanix node.  I am running ESXi on the nodes.  I have looked all over but I cannot find anything that tells me definitively the best practice.

I want to create to vm’s using REST API by selecting one of Catalog Items.I can create vm via catalog items via Prism Central Dashboard.When i try to create vm via REST API, i can not find any reference to give Catalogs Items vm  template there.How to give vm templates in vm creation using REST API?

Hi folks, In VMware, we need to enable EVC to be able to do vMotion between diff processors, what about AHV? what should be done or is it working smoothly?

HiI have 4 Nodes cluster with the detailed network belowVLAN1000 : IPMI Usage (192.168.255.x/24)VLAN20 : GuestVM & Internal Cluster Network (192.168.2.x/24)I was using eth3 and eth4 in bond br0-up in bridge br0 (vs0) And then i’m adding a new vlan (VLAN30 : 192.168.3.x/24) for separating GuestVM network from Internal ClusterI am using eth0 and eth1 in another bond (bond br1-up in bridge br1) connected to my switchport mode access VLAN30. The problem is, when i created VM using that network (vs1), my guest vm cant ping anywhere even the gateway of its subnet. But when i test my laptop that connected to the switchport mode access VLAN30, my laptop can ping the Gateway.Here i give the detail of my topology and uplinks configurationTopologyUplinks of each hostsvs1 configuration Perhaps someone can enlight me maybe i missed something here when i’m trying to configure this? Thank you.

We have numerous clusters and each have their own hardware platform (and in a couple of cases, we’ve even mixed hardware models within the same cluster). Our current Nutanix footprint;VENDOR         MODELS        NODE COUNTSuper Micro    NX-8155-G7    12Super Micro    NX-1175S-G6    7Super Micro    NX-3060-G7    6Dell                 XC630-10         14Super Micro    NX-8035-G7    12Super Micro    NX-8035-G6    36Is there a preferred or recommended solution for hardware monitoring and alerting? For instance; Dell OpenManage (DOM) or Supermicro Server Manager (SSM). I don’t readily know if either would support the others solution (like DOM supporting IPMIs or SSM supporting iDracs) Or, would Prism Central (and Prism Element) be sufficient for hardware monitoring and alerting?We currently have and are using DOM but not for the SuperMicro hardware so I’m wondering if I’m potentially missing out on a better solution or not.

Hello!I have an LCM inventory task that seem to be stuck in my cluster. It is stuck at 5% since 2 days ago. Please, help me to solve this issue. The following command shows that there's not LCM process running:$ acli task.list include_completed=false | grep lcm

Hi!I am wondering, if there is a quick way to restore from a failed ESXi upgrade.Imaging you have fired up a ONE-Klick-Upgrade of the ESXi image, and (as see with ESXi7.0U1GA) the hypervisor is not boot up again.At ESXi level i can backup config and restore config after a plane install. But what about CVM?Setting up the whole node with foundation is a nightmare, if the node is already installed in an customer environment, and can’t be discovered.The best way would be, that the foundation within a cluster could deploy a CVM to a plain ESXi and rebuild the cluster-node from the information stored in the cluster...

HI Team under Prism we’ve created a few VM’s (windows), one of VM is our File Server, current configuration is IDE disk 1TB, (60GB OS, 900GB shared folders). probably is better to create one virtual disk 60GB on OS and the second virtual disk as storage (1TB) or more.question is how to shrink current IDE disk from 1TB → 60GB, and if IDE should be change on SCSI disk, what Nutanix recommended?instruction to shrink disk IDE->SCSIthanks Dariusz

Hi, Is it possible to do a yearly backup of a Nutanix file server within the protection configs? Looking to see if we can do Yearly and then keep 3. Current settings are - Hourly Every 1  hour 24 · Daily Every 1  day 7 · Weekly Every week on Sun   4 · Monthly Every month on 1   12

I have VMware 6.5 U2 running  on Dell XC 740 xd appliance in NUTANIX environment.ESX are not patched since a year now. Looking for the best option to apply patches.Is VUM will be ok or from PRISM ?

We are running on SMB NetApp and I’m curious to finding out how to implement the Qtree/Quotas in Nutanix files?

From the Nutanix Bible: “when a Curator full scan runs, it will find eligible extent groups which are available to become encoded. Eligible extent groups must be "write-cold" meaning they haven't been written to for awhile”.I have 2 questions:if I have some data just written in the oplog, how long takes to copy those datas in the extent store, assuming that there is not any read of it?Once the data are in the extent store, how long it takes before the erasure coding is applied to the datas? 

Hello all,I am trying to do some updates in a dark site. I have configured the webserver and downloaded all the updates on the local server(like in the documentation). But from my understanding of the documentation, you need to do the following steps:Put the necessary files in the web server Replace the compatibility checks for the specific upgrade module Run inventory checks. Upgrade moduleI find it quite hard and time-consuming to do this for each component. Are there any better/faster ways to upgrade a dark site?For example, download all the upgrades and perform only one inventory check?

I want to collect informations from a single hyper-V host in a cluster.But i get an error:HTTPSConnectionPool(host='192.168.10.141', port=5986): Max retries exceeded with url: /wsman (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x000001AD0B88C808>: Failed to establish a new connection: [WinError 10061] No connection could be made because the target machine actively refused it'))Powershell 5.1 is installed, IP is correct. Has someone an idea?

I tried to use the precheck script on one of our Hyper-V servers.Everything works fine, but I get the error message ".... not a Domain Admin." even though my user is a domain admin. I think this might be related to the fact that the Domain Admins group is called "Domänen-Admins".Has anyone seen something like this before?

Hi, we are getting 100’s of copies of a simple PC report (a clone of one of the built in reports). It seems after time change on Sunday AM the reports w/ schedules seem to trigger an hour earlier than they should. So they then run over and over until the time actually triggers. For example:Daily Report scheduled for 7am, runs at 6am (over and over - 718 times last count) until 7am (it runs over a bit, eg. 7:05am which I assume is just it catching up w/ the que). I have deleted the reports, created brand new ones, setup new schedules, checked time on PC CVM (is correct). Tried to restart services/cluster stop/reboot, etc. Even tried updating PC to 2021.1.0.1 (which fixed a PDF reporting issue we had, but not this one).  Anyone else having this issue?

Hi,Any information, by when the results of the NCP-DS beta exams can be expected?I took mine on February 7th and am curious.

Is there a command to update a vm’s custom script/user data?I tried the following and it doesn’t work:<acropolis> vm.update  my-vm cloudinit_userdata_path=file:///tmp/user-data.txt

Are there ANY plans to expand on the PowerShell cmdlets at all, specifically for getting host info? They’re pretty bare bones. I don’t even know the last time the cmdlets were updated/expanded. It seems to me Nutanix regrets making them and hopes they will quietly die. I have relied heavily on PowerShell to keep tabs on a very large Nutanix environment running Nutanix on both AHV and ESXi. I’m talking 700+ nodes. The ESXi clusters are no problem getting the info from because I use VMware’s PowerCLI to supplement the lack of data I can get with Nutanix Cmdlets, but the AHV clusters are another story since I don’t have PowerCLI to fall back on. Can we at least get a cmdlet that will allow us to use PowerShell to initiate ncli or acli commands, like VMware does with the “Get-EsxCLI” cmdlet. That would be very helpful.

I want to configure a new AHV cluster with 10 Nodes, this would be the first time for me. I have little experience to install AHV on Bare metal, AOS, AHV installation, Network configuration etc. etc.Please share me some document so that i can able to install this. Right now i have only Nutanix Field Installation Guide.