Sizer Configuration Estimator

Hello Team,The specifications provided by Lenovo has an OCP networking on the HX630(650) V4.https://lenovopress.lenovo.com/lp2132-lenovo-thinkagile-hx630-v4-hyperconverged-system#table-overview-of-featuresHowever, you cannot select items for NIC(FLOM-OCP) in Sizer.Is there a reason? 

Chceck out this post and what’s available: https://next.nutanix.com/nutanix-cloud-platform-for-ai-180/sizing-for-ai-is-harddd-not-anymore-say-hello-to-nutanix-sizer-for-nai-45136💡https://sizer.nutanix.com/#/home💡  

Good morning,I wanted to get a confirmation: if I have a VMware vSphere environment with VMs configured with Thick Provision disks (for example, a disk with 1 TB of allocated space but 500 GB of actual used space), when I migrate it to a Nutanix AHV environment, which supports only Thin disks, will the migrated VM consume 1 TB or 500 GB of real space on the cluster?Additionally, if only the actual used space is taken into account, why does the Nutanix Sizer, when importing an RVTools file, base its calculations on the allocated space rather than the actual used space shown in the vPartition tab?Thank you.

As a Nutanix partner, we are currently planning to migrate part of our workloads to the Nutanix infrastructure.We have already completed internal sizing for our environments and would like Nutanix's assistance to validate and optimize the sizing on Nutanix.Could someone from the Nutanix team or community guide us on the recommended process and tools for accurate infrastructure sizing?Thank you :)

On all my latest sizing configs I seem to be unable to create a proposal.I get the following error: e.response.headers.get(...) is null Any idea where to look?

Hello, everyone.During the last Nutanix .NEXT event (05/07/2025), the partnership between Pure Storage and Nutanix was announced, enabling the use of Compute Only (CO) clusters integrated with Pure's FlashArray. (https://blog.purestorage.com/news-events/pure-storage-solution-with-nutanix/) When accessing Sizer, I still haven't found a specific option for pure "CO" where I can combine nutanix+pure. So I did the way I found, I selected "CO + SO", I can't exclude the nodes with "Storage Only" function, which makes it difficult to simulate the desired scenario. I would like to understand a few things, if anyone knows and can contribute with information:→ How to perform the correct sizing for "Compute Only" clusters integrated with a Pure Storage FlashArray? → Is it possible to configure N

Hi All, I am very new to Nutanix. I am looking to size our environment on Nutanix platform which is currently on VMware. I am looking to size 50TiB of storage in the Nutanix cluster(3 node cluster at beginning) and how many disk are need for achieving so. The cluster will be all NVMe. Does Nutanix need cache disk for All NVme cluster as well like VSAN OSA or it’s same as VSAN ESA. I will be very grateful for any suggestions or link for correct documentation. Thank You

Hi, I have a question about exporting BOM.I have troubles when I tried to download BOM. An error show “Cannot invoke "com.nutanix.sizer.persistence.domain.BlockDistributionData.isExistingModel()" because "blockDistributionData" is null”” and download failed. What should I do for fix this problem? Regards,

I noticed that the option to retrieve the BOM from the sizer is grayed out. Additionally, when I attempt to modify the cluster settings, I receive a message stating: 'You cannot add/edit advanced cluster filter options for basic users.

Getting the error message when trying to import ZIP file into Collector.

I have a question about "95th Percentile Number" for output of Nutanix collector 5.1.I am running I/O of Read/Write from vdbench on virtul machine of VMware environment (ESXi 7.0U1 and vCSA 8.0.0.10100)  , but the "95th Percentile Number of Writes" and "95th Percentile Number of Reads" values on "vHosts", "vCluster" and "vInfo"are 0.Could you please advise me on how to solve this problem.

Dear Support,My problem is that i would login to the sizer.nutanix.com website, the login window looping.I have a valid registration and a certifiace as well.One of my collague has the same problem. Thanks for your help. Bálint Schlenker

When attempting to log in to Prism Central for the first time, I encountered the following issues despite using the default Nutanix username and password.  

A client was not able to run the collector app during a call. After the call he send me the following log error: 2024-02-26T13:23:55.866Z info: CONFIG_PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\ntnx_config.json2024-02-26T13:23:55.873Z info: PROTO PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\resources\app.asar\build/../protos/collector.proto2024-02-26T13:24:01.530Z info: Something went wrong while deleting app data,Error: 14 UNAVAILABLE: No connection established. Last error: connect ECONNREFUSED 127.0.0.1:50051 (2024-02-26T13:24:01.507Z)2024-02-26T13:27:38.651Z info: CONFIG_PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\ntnx_config.json2024-02-26T13:27:38.656Z info: PROTO PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\resources\app.asar\build/../protos/collector.proto Can someone please help me? Thanks

Hello i need to configure a HPE HW on the sizer but i don avaible to do that ! please help me 

Is there a feature within the Nutanix Sizer that allows for manual adjustment of the vCPU to pCPU ratio? If so, could someone guide me through the process or point me to the relevant documentation or resources?

We have this HCI project that span in 4 different location data center with DR site in mind.Site 1400 VM + 10 PB Disk Site 2400 VM + 5PB Disk  Site 350 VM + 5PB DiskSite 4200 VM + 5PB DiskRF3 model VM and Disk capacity is based on 5 yr projected growth.VMs is between Large to XL type.We cannot come up with best DELL XC model for this setup is XC760 can accommodate this requirements?Any suggestions 

Hi team,i want to do sizing for cisco HCI with Nutanix, but i am not found hardware for cisco. i just have hardware for Nutanix (NX-series). please your help. 

I am trying to size a Dell XC configuration, but Dell or Dell XC is not coming up in sizer?  Is this intentional?

HI, I tried to create DX360 Gen11 8SFF scinario with 2x 4410Y CPU & 7.68TB 2.5 inch Samsung RI ---SSD(P56763-B21), but Sizer shows following message and I can’t save the config:---Due to thermal restrictions on DX360 Gen11 platforms, if 8470Q/6458Q processor is selected, then drive type can't be SAS SSD or NVMe in cluster "Cluster-1". ---I think it should be fixed, or could you please show a workaround?

I want to create a configuration in Sizer that takes a snapshot once a day.However, an error message is displayed on Sizer and configuration is not possible."Cluster: 'Cluster-1' nodes with SSD capacity less than 7.68TB are not allowed when configuring Hybrid nodes with RPO of 6 hour and node capacity ranging from >96TB upto 136TB. For more info, refer to Nutanix Maximum Configurations & Snapshot Frequency Field Requirements"Sizer's workload only has Daily Snapshots set."Hourly Snapshot Retained" is unchecked.However, for some reason, the condition check for 6 hours RPO is caught, and the hardware cannot be configured.What should I do to remove this error?

Hi, I’m trying to make some changes to a configuration I put together for a customer, in relation to the Mine backup. I am trying to alter any aspect (in particular I’m trying to change the retention to be longer, wtih  fewer VM’s) - but each time I try I get the error “ The number of Server Virtualisation VMs in cluster: CLUSTER should not be more than total nodes in the cluster. “ Anyone know what this is please?

Hi everybody,i’m trying to Size a Mine appliance with Veeam (Workload: Mine (v2) with Veeam) leaving all default and with Nutanix Hardware and i get the error below:No Optimal Solution found for following cluster(s) due to:MineModel not supported for standalone backup mineIn order to generate an optimal solution, please try modifying the workload requirements and/or sizing options. You can also try switching the Sizer Policy profile or re-configuring the selected Sizer Policy profile. If i try the same with HYCU it works as expected.Any suggestion?Thank you

Hi! I have two doubts related to Collector´s vcpu and cpu calculation.1) I couldn't find the information on the vcpu/cpu ratio per VM in Collector's Excel spreadsheet? Please, how is it calculated when we perform workload upload per VM? 2) In Sizer, I performed a manual modeling from Collecto´s Excel spreadsheet information as a “Raw Input” and compared it to the automatic per VM-upload modelling.In the analyzed scenario, the customer has 440 CPU Cores distributed in 19 physical servers/hosts in the current environment (vhost table information)  My calculations/modelling for a “Raw Input” is the same for the overall resources calculated by the automatic per VM upload (RAM, Datastore), except for the total o CPU cores in the cluster.The automatic per-VM upload/calculation was performed with th

I am curious why when sizing a Splunk workload and increasing the performance profile for the indexers it doesn’t increase the ingest rate per indexer rather than keeping it at 100 GB.  By not doing this, it keeps the same number of indexers Nutanix thinks it needs even though each indexer has more CPU/RAM.  I could be missing something simple here, but I would like to hear other thoughts.Capacity Planning Manual: Summary of performance recommendations