Nutanix Cloud Infrastructure

Hello,We will be performing maintenance on a network switch at our DR site that will require some downtime.  This switch provides the trunk ports for our DR nutanix cluster.  Do we need to shut down the cluster prior to the switch maintenance to avoid any corruption or will we be ok with just a temporary loss of networking. Thanks for any info you can provide!

We have a 3-node AHV Nutanix cluster and the cluster wide disk usage reflects the size of the disks provisioned for all the guest VMs. The sum of the disk usage of the VMs do not exceed 3 TB but cluster usage detects 11 TB witch matches the total provisioned disks for the VMs + a few snapshots there. My understanding is the cluster should report a total disk usage of 3 TB + the snapshots, What am I missing here? Thanks in advance for your responses.

I tried to install Windows Server 2022 using OEM provided DIsk image but its getting failed below error. Not sure how i can resolve this    

I have new cluster without license with RF2 redundancy, host failure happens, VM restarted on other host but disk is missing on the vm, is it the expected behavior?

Per the following articlesEnable Nutanix Flow article (Opens in new window or tab) is outdated and is only applicable to older version (Prism Central 5.6). Official Nutanix Flow Network Security (formerly Flow Microsegmentation) article (Opens in new window or tab) is applicable to a newer version 6.6 but it doesn't explain how to send Network Flow data remotely Enhance Application Security with Nutanix Flow and Check Point CloudGuard article (Opens in new window or tab

Hi guys, i have a scenario here. An Admin forget the password and unable to access to both Prism and CLI.What should he do to regain access to the cluster? I understand if you have access to either one of Prism or CLI, you can reset the password, but what if both unable to access?

Hi team,We have a 20 node(Esxi) vSphere cluster with VCenter . and we want to remove three(3) nodes out of the 20 nodes and all the 20 Esxi nodes part of the cluster.and my questions are1.what are the pre-requisites to remove the esxi nodes from the cluster2.what about the data3.please share the step by step procedure to remove the nodes4.if the polices (affinity or antiaffinity ) are there how we can migrate the data5.what about the functionality of HA and DRS6.what about the network connectivity.please acknowledge as soon as possible.  

Hi,We have just implemented a pairing with a customer on-prem cluster and a protected side cluster and created some protections domains.All seems to works well but we search to obtain more information on protected side.We are currently unable to view Entity Count, Next Snapshot Time, or Entities on a selected Data Protection.Is there a way to obtain this informations ? Is there anything thats was badly configured ?Thanks for your help ;)

Hi,For a new customer we currently configure the data protection context from the production cluster to a DR cluster.The customer want to reduce the storage sizing by selecting which disks on the VMs that will be replicated.Is it possible ? I don’t find anything about this on official documentations.Thanks and best regards.

If you're working with a Nutanix AHV Cluster and need to download IOS files, here's a step-by-step guide to make the process seamless.Step 1: Connect to CVM via SSHOpen a secure shell (SSH) session to one of the Controller Virtual Machines (CVM) in your Nutanix cluster. Use the following command:ssh nutanix@<CVM-IP-Address>Step 2: List Available ImagesOnce connected, use the Nutanix Acropolis Command Line Interface (acli) to list available images:#acli image.listStep 3: Copy Image UUIDIdentify the IOS image you want to download and copy its UUID.#acli image.get <Image-UUID>From the results, copy the vdisk_uuid associated with the desired imageStep 4: Download Using WinSCPDownload and install WinSCP, a popular file transfer tool. Connect to one of the CVM IP addresses on port 2222 using the SFTP protocol. Ensure that you use the username 'admin,' not the Nutanix CVM username.

Can I test Nutanix REST API using Nutanix Test Drive? I also can not change default password for admin user in Test Drive Prism Central: “Nutanix/4u” and “nutanix/4u”  gives “Current password provided is incorrect.”

Can you help get the IPMI for Dell XC server and AD ports for Nutanix cluster 

"Phoenix failed to load squashfs.img from both network and existing CVM filesystems of the node"The error above was seen for each of the four nodes. The nodes are Nutanix NX-8155-G8.Any idea of what could be causing? Thanks

Halo,i have problem when sharing data accross VM using VGroup.So i Create VG with name “VGroupBackup” and attach that to Windows VM for SQL Backup. I want share that VG to multiple Windows VM. The Problem is, the data from VM 1 is not syncronize to another VM. is anyone have solution for this? Thank You.

I have 2+2 10gb nics for 5 nodes, is it advisable to configure 2 in one lacp and 2 nics in one nic.Will it tolerate 2 nic failures

Hi  I am new to the Nutanix and want to know clarity on  below query.Please any body help me on below query,we have  a five  Nutanix node cluster and out of five node cluster three of them G5-Nodes which warranty will be completed on 31-oct-2023. reset of two nodes G8-nodes which we were added recently to the cluster.Now we are planning to remove the three G5-Nodes from the cluster and if we remove three G5-nodes,two nodes will be there and it become a two nodes cluster.if it is a two node cluster there no witness vm for redundancy. Now My Questions are below like. 1.       Is there any possibility of removing 3 nodes from the existing cluster?            A. Removing the 3 (G5) Node from the existing RF2 cluster is not possible. (2Node Cluster                         and  RF2 based cluster are designed for different Infra)            B. RF2 to 2 node cluster is not supported by Nutanix engineering Team.

I’m looking into setting up an automated task to get the output ofacli snapshot.listfrom each of our clusters, so we can track down forgotten snapshots & which VMs they’re on.Ideally this would run from nutanix itself and spit out the results into some kind of shared storage space we can review, but according to this thread, non-default cron jobs are deleted when AOS gets upgraded. I also can’t see anything in PC/PE to automate this, or find this information without SSHing into the CVMs.At this point, I’m looking into writing a script to host somewhere internally that SSHs into each set of CVMs and runs the command, but then I’ve got to handle password security and frankly it seems like too much of a bother for something I’d only have running monthly at most, that would take me 10

what is the difference between these, can anyone share the refernce diagram for these 2 scenarios4 × 10 GbE (2 + 2) and 2 × 1 GbE separated Use to physically separate CVM traffic such as storage and Nutanix Volumes from guest VM traffic while still providing 10 GbE connectivity for both traffic types. The four 10 GbE adapters are divided into two separate pairs. Compatible with any load balancing algorithm. This case is not illustrated in the following diagrams. 4 × 10 GbE combined and 2 × 1 GbE separated Use to provide additional bandwidth and failover capacity to the CVM and guest VMs sharing four 10 GbE adapters in the same bond. We recommend using LACP with balance-tcp to take advantage of all adapters. This case is not illustrated in the following diagrams.

What is the policy for Oracle DB Virtual machine licensing?.

There is a cluster using GPU pass-through. It consists of 11 nodes, including 3 GPU nodes. Servers utilizing GPU pass-through are billed servers and should ideally have minimal or no downtime.Due to the current End of Service Life (EOSL), an upgrade is being considered.For this, the plan involves excluding one GPU node from the cluster, upgrading it to AOS and AHV standalone. Then, using cluster expansion to add it back, turning off the power of the GPU pass-through server, migrating it, and subsequently upgrading the remaining nodes through LCM.Is this plan feasible?

The last comment was that the support for vSphere 8 would be released in the next upgrade and that was four months ago. Can we get an update? We are telling customers they can’t migrate to 8 which is causing customers to look at other directions.

Hello Everyone,We have a cluster that failed. It’s running on an old NX-G5 box, and has been out of support for a while now. When trying to start the cluster, we’ll get varying messages. Sometimes it’ll say the cluster hasn’t finished being configured. Other times it’ll be about genesis or zookeeper. Genesis is currently running on all the CVMs, zookeeper is only running on one of them. I’m able to ping everything from everywhere, and all of the zookeeper and network config files look correct. Any ideas on what to check from here would be greatly appreciated.Another thought was that if we couldn’t get the cluster up and running, is it possible to somehow recover the VM disks and import them into another AHV cluster? Does anyone have any experience with this?

Need reference cluster diagram with vlan and container information lld diagrm for 5 nodes

can some on help help me with Nutanix dell cluster reference diagram

I have a virtual machine that created a snapshot. After logging into the CVM, I can find the disk files corresponding to the snapshot in the snapshot directory. However, the size of the snapshot file is equal to the size of the master disk, which is a complete replication, not generating a new file to store the increment. I added a file to the virtual machine and found that the modification was to the master disk, while the last modification date of the snapshot file did not change.The underlying layer of AHV uses kvm, which can create an external snapshot through virsh.Does AHV support creating external incremental snapshots