Nutanix Community Podcast: The AI-Ready Platform: Nutanix Simplifies Enterprise AI
Hello Community,My Nutanix Cluster cannot connect to LCM Framework. Unable to retrieve framework status: Error: Gateway Timeout. Has anyone had the same problem before? Thank you.Unable to retrieve framework status: Error: Gateway TimeoutCluster detail: 4 Node Cluster2 Compute 2 Storage Using Proxy AHV el7.nutanix.20220304.392 AOS 6.5.3.6 NCC 4.6.4 LCM Version 2.6.1
the imaging of a new cluster was progressing till the ESXI hosts has complete it’s installation on version 8.0u1 and the imaging stuck on rebooting node this may take several minutes the nodes are rebooted the i can see the ESXI login from the console but the imaging stuck on this message anyone completed the imaging on vsphere 8.0u1 on G8 nodes is it compatible ? thanks
I receive the following error when trying to use a public signed cert in Prism Central:Unsupported signature algorithm detected on one or more certificates in CA chain. Please refer to the FIPS 140-2 documentation for more information. I did the same for Prism Element a few days ago and that went fine. Followed the exact same steps (minus the FQDN of course) for Central but this throws an error. What's the difference between the 2?
We know that there is a tool to export a VM in OVA format, and with that, it is available for download in the tool's dashboard. But I need to export many VMs at once and move these OVA files to a location with available storage on my local network. Is there a possibility to access the location (within Nutanix) where these OVA files are stored to copy them all in a single action?Regards, Tiago Santiago
Good day nutanix community A customer it´s going to upgrade his cluster from ESXi 7.0.3 to 7.0 U3l BUT, in the Compatibility and Interoperability Matrix there is no information about this ESXi Version so, it´s is supported this ESXi? Current AOS version 5.20.4.6 LTS and in the LCM it´s available the update 6.5.3.6 LTSModel NX-8035-G8
We are team of developers working on the hosting platform based on the nutanix cluster and getting issue with the enable console on new VM without disclosing cluster credentials ?
Hello I am looking for guidance regarding setting up a 3-node and 2 node AHV cluster on 1G switches . Our workloads are low. The official response is to use a 10G switch fabric. If I opt for 2 node, can I connect the servers back to back for distributed storage ? Can data network go over 1G ? I plan to procure 2 servers with 2x 10G for distributed storage , 2x 1G NICs for data Thanks,Ajay
I made an alert for the hard disk, if its use reaches more than 90%, it sends me an alert on the e-mail, but the problem is that some servers contain a C disk and a D disk, and when one of the disks is full, it does not send me an alert because the other disk has space, so how can I separate the disks from Some in order to warn when any disk is full of them
Hello,The prism dashboard show that there are some Orphaned VSS Copies Detected that needs to be deleted.Hypervisor: Hyper-V 2012 r2 Datacenter.Post Windows updates I found this issue.
Good afternoon AllI have just watched a video about converting Br1 to VS1, during the process it shows that the hosts will go into maintenance mode and reboot, however the presenter said that unless the MTU is altered the VS will be created on all hosts with no reboot - I just want to confirm this is correct as this is a live production environment? Many thanksEric
Hi can any one help me on below query , when i Create Isolation Policy in Nutanix flow getting below issue how fix it..?can any one explain about the all policy's in Nutanix flow with example..
I'm using a Nutanix virtual machine to run a DPDK(Version 21.11)-based application.Application is failing during rte_eth_dev_configure . For our application, RSS support is required.eth_config.rxmode.mq_mode = ETH_MQ_RX_RSS;static uint8_t hashKey[] = { 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, 0x6D, 0x5A, }; eth_config.rx_adv_conf.rss_conf.rss_key = hashKey; eth_config.rx_adv_conf.rss_conf.rss_key_len = sizeof(hashKey);eth_config.rx_adv_conf.rss_conf.rss_hf = 260With the aforementioned RSS configuration, the application is not coming up. The same application runs without any issues on a VMware virtual machine. When I set eth_config.rxmode.mq_mode = ETH_MQ_RX_NONEeth_config.rx_adv_conf.rss_conf.rss_hf = 0Application starts wo
Hi Every One,Please help me on below question, How we have to integrate vmware infra with nutanix hci…?What is the prerequisites to integrate vmware infra with Nutanix hci…?what are the Network prerequisites to intigrate vmware infra with nutanix hci..?
Any solution for "Error A6218: AHV Host Password for user nutanix is expiring in the next 500 day(s)"
I have encountered a peculiar situation here. I am synchronizing two file shares, and everything appears to have been copied successfully. However, there is one folder that doesn't show up in the target file explorer. I am certain it was copied because I can see it in the log. Additionally, if I attempt to create the same folder in the target location, I receive an error stating that the folder already exists, and it creates a new one with a '(1)' appended at the end. I have ensured that the hidden view is enabled in the file explorer. Any thoughts on what might be causing this issue?
I have a situation where my production cluster is a lease with $1 buyout from a service provider who is license the cluster and the term is up this fall. We have AOS and Frame license as a service and provided by the them. In planning to take over ownership, I am needing to continue the license on this cluster and the Frame license. I am having a hard time finding instructions from any of the current Nutanix Sales team because the current hardware is still under the leasing contract and it seems like we cannot get a quote/plan to apply a new license on this cluster. We are always directed to purchase a new cluster with new licensing. We are force to look a new cluster so our team is now open to new technology outside Nutanix. The easy answer seems to elude. Does anyone have any direction contact or advise to try to get the inventory ownership transferred and get new license applied without effecting Frames on the AHV cluster? I cannot I have emails going back since last year try
I configured domain protections between my primary and secondary site.domain protections are configured by VMs which means that I have as many domain protections as VMs.After the first replications, I would like to make sure that the size of my VM on the primary site is identical on the secondary site but I find that this is not the case.I don't know if I'm doing a good interpretation.Attached is the capture of my VM on the primary site before replication and on the secondary after replication.Please help me with your explanations.
Subject says most of it. I have read the physical networking “best practices” guide, and I am currently running a small (3-node, NX-1175S-G7) cluster on top of Dell S4112F switches.My org is looking to add a second cluster at a second datacenter, and I was asked if the Mikrotik CRS510-8XS-2XQ-IN or Mikrotik CRS518-16XS-2XQ switches would work for the new cluster.My initial response was “no,” but I’m wondering if anybody has tried it? I would be concerned about buffer size on the switches… but how much does that matter if all of the cluster nodes are connected at the same speed, and I have a L3 boundary (router/firewall) between the VM subnet and the rest of the network (router has much better buffering than any switch would)?I do not have decision-making power here, so how can I “influence” my boss that using three-figure switches is likely to be a problem for a 5-figure+ cluster?
How to access the Mgmt port in back of the node. Is it through broswer, ssh etc TK
Hi, they can help me, I have a PD and I deleted the local snapshots and schedules, but I still see the amount in "Snapshot Exclusive Usage", it takes almost 30 hours that everything was deleted and I see no way to reduce the PD. regards,
Hi team,I’m facing these Nutanix alerts. Kindly provide me solution for this problem to be resolved ASAP.“Nutanix VSS provider or (pre_freeze/post_thaw) Scripts Not Installed”Thanks & regardstamil
There is a VG with 5 GB disk assigned for 2 Linux Machines by VM name, upon restart of VMs this disk gets disconnected, to reconnect the disk, I have tried removing the VMs from VG and added again, the disks started showing up fine.In the linux maching the NFS mounts are saved as persistant already.Please let me know if this is a known issues as all other VGs with same configurations are working perfectly fine.
can any body explain about Nutanix HCI Architecture and how does it work
can any body explain below quary..?Disaster Recovery DC to DR with Async replication for what is the prerequisites and please explain step by step how to configure it..?
Hello everyone,I am using the Robo cluster and seeing 7.68 TB space in recycle bin. But this space not reclaimed. How can i reclaim this space?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
