Nutanix Cloud Infrastructure

 Stop the Man in the Middle Attacks.Whether you're replicating to the cloud or to a remote branch site you may not control the networking stack and to end. When you don't control the networking stack end to end or you're in an environment that simply doesn't have a firewall you can use Nutanix Native DR encryption between your Nutanix clusters.  The feature is fully supported for both PD and Nutanix DR(PC) based replication.Changes will persistent after reboots of the CVMs and upon upgrades.AOS needs to be on 6.1 or higher.DR with Encryption will use 14119,14108 as additional ports that need to open bi-directional when all of the CVMS. *** Note you need to run the below steps on each cluster.To enable this featureSSH to the CVM Cha

when you play to many video games as a child Check out this new hibernate video for AWS.  

I wanted to start a discussion on our new Flow Virtual Networking VPC feature based on this video that TME Eric Walters created.You can use VPCs to make isolated overlay networks, do self-service network creation, or multi-tenant separation. Have you tried out VPCs in your environment? 

i wants to Migrate Azure VM to AHV Cluster, please help us to Migration Procedure.Azure Cloud VM to Nutanix AHV Cluster.

Hi All,  We have an issue trying to install Hyper-V on Dell XC750. From what I can find on the document, it should be supported. However, I am not able to find the customised image for Hyper-V. Appreciate if anyone can share thoughts. Thank you RegardsElroy

We have this event power on vm after failover recovery on random virtual machines, this generates unavailability.Does anyone have a solution on the matter.We don't know why the restart of the VMs is happeningHelp

Hey Guys,Please share the Use cases for above mentioned features.  

We have migrated few VMs from VMware to Nutanix, and Static IP information no longer visible in Adapter settings.

I have the following error (Inconsistent Virtual Switch State Detected)and some virtual machines restartHelp

Hello All, I'm working with a customer on a new solution designthe customer has a VMware workload and we plan to put AHV,I want you to advise me on how I calculate the storage requirement, Let’s say the customer workload is about 170 TB how do i size the cluster storage Also, I have some questions related to storage sizesif I have 3 nodes clustereach node with 10 disks each disk 4 TB (numbers for examples only)that means total raw storage is 120 TBwe will go with RF2 which means 1 node is out of our usable capacity calculation So what is the usable capacity here after the 1 node for failure and the Raid used in the cluster creation, also what else should be conducted from the storage in storage planning?

Hello,I’m trying to install Nutanix community on VMware workstation to test it. In the initial configuration, it asks for two IP addresses and DNS. Would like to know what the correct IP address configuration is if I have an ISP. Do I assign IPs from my ISP?  

Hello everybody, I started using Storage VM migration … vm.update_container VMNAME container=test-container … to move VMs from an old to a new container. Big VMs have been moved. I would like to delete the old storage containers, but space usage is still high, allthough VM have been moved to another storage container. I am aware of the directories … .acropolis, .file_repo and .ngt … and those directories are empty now. How can I reclaim space in a storage container, when VMs have been moved, the Recycle Bin has been emptied.No VMs have been deleted, only moved, so the 36 hours rule for space reclaimation doesn’t seem to apply here?Any thoughts?Regards,Didi7 

Long shot i know, but i’m wondering if anyone every solved the issue of VSS backups failing after June 2022 Update on Hyper-V 2012 R2 hosts. Veeam has this KB Article that references a workaround/fix:  https://www.veeam.com/kb4333However, it’s not at all clear how i would make a domain account an administrator/backup operator on the File Server that hosts the SMB3.0 share (the cvm..)

We’re running 2 clusters which are pretty much configured the same running ESxi 7.02 AOS 5.20.4 LTS both running on nutanix hardware.  One cluster is totally fine no issues but the other you cannot create a virtual disk greater than 2Tb! The issue only came to light when we had to move a VM off to another non-nutanix host for a few days then when we went to vmotion it back it errored complaining about the disk being greater than 2Tb, it is its nearly 6Tb as its a fortinet analyzer. I’m pretty sure when the VM was sat on the nutanix cluster its disk was greater than 2Tb and it was thin provisioned with a capacity of 7Tb when it was created!  So you can’t move anything to any of the datastores that are greater than 2Tb and you also can’t create a new disk greater than 2TB.  Also if you take a look at the datastores details it says maximum VM disk size 2TB, on the other clusters datastore it says 62Tb. It's getting to be a bit of a pain as the fortinet analyzer is sitting

When running foundation from the same network as the CVM/AHV host should be in, I’m getting this error. Phoenix Failed to load squashfs.img. I can’t ping the gateway, and it looks like during the bring up it’s unable to create bond0 with the NIC, which is 534FLR-SFP+. It’s like the link just doesn’t come up when booting into the rescue image.I’ve tried:Disabling the 4 port onboard NIC Pinging itself from ILO remote console (it works) Pinging the gateway and Foundation VM IP from ILO remote console (it fails) Installing ESXi manually on the server to confirm tagging/networking is set up properly, and it is Changing the IP of the foundation VM to another networkReally stuck hard. Any advice nutants? It’s like the rescue image doesn’tError Message

Hello Nutanix community, i have a question about compatibility between Cisco ESA C100V and Nutanix AHV?  

Hello everybody,I have an issue that PC Web console refuse login as the user/password were wrong, but that same user/password works fine on SSH, after troubleshooting, PC time zone set to PST not UTC from CLI while on VM configuration it’s UTC, I tried to change it to UTC from CLI , the web console accept the login, but after while it return to PST timezone, I configure NTP to local NTP. 

Can we export VM Snapshot out from Cluster using WinScp? If can is there any workaround to do it?

Howdy,I am trying to envision what this would look like in a Nutanix environment for planning purposes.Currently we have two datacenters.  We have one large vcenter cluster (Cisco UCSs, Synchronous Nimbles, Nexus vpc pair, L2 stretch on our own dark fiber (multiple 10gb links)) stretched across both DCs.  This allows us to vmotion all VMs from one side to another, take down half our hosts, or even a whole DC without any issues.Thinking what this would look like if we were full Nutanix and AHV I am pretty sure this would not work (1 large cluster as we couldnt take down 1 DC since that would take out half of the hosts\storage).  Correct?If so, I am thinking this would require at least a cluster at each DC, and then you metro-availability to uses the real-time sync.  Does that sound about right from a high level?Thanks

hello.If you have any questions about UUIDs, please contact us.acli vm.get <VM Name> Nutanix-Clone-Study_1: Original  container_id: 8      container_uuid: "04a931b9-4d2f-44a7-9903-8a5a3a3c463b"1.   device_uuid: "4c4ae3e4-530d-4167-872a-ef6f2e6a41e9"2.   naa_id: "naa.6506b8d8a5a92f6208b7e2380facb355"3.   source_nfs_path: "/default-container-64847153591394/.snapshot/44/4359493875056948270-1663090801228723-26644/.acropolis/vmdisk/175ba8a7-0ca1-402f-9ab0-81ac7bfaa704"4.   storage_vdisk_uuid: "fffd1e57-0fe4-4ed8-b706-9747e0e99449"      vmdisk_size: 161061273600 5.  vmdisk_uuid: "c1769c0e-2536-444a-8e08-2b986a6fada6"------------------------------------------------------------ ------------------------------------------Nutanix-Clone-Study_2 : Clone      container_id: 8      container_uuid: "04a931b9-4d2f-44a7-9903-8a5a3a3c463b"      device_uuid: "5f35410f-5bd1-4e06-a789-308276493787"

When I am upgrading AHV below is the error I am getting could you please help how to resolve the issue.  

I have a 8 nodes nutanix with vSphere 7 deployed. I’ve created 2 new storage container with compression enabled and map to the nodes. I test to copy the file that i uploaded to the default container to the new storage container presented as NFS datastore...it was very slow. 5GB took 2hrs. Then i tried storage vmotion of a VM reside on the new datastore to another new datastore. A 10GB VM took 20 minutes. If storage vmotion from the default container to new datastore, it fails. 

I want to migrate Prism Central VM AHV cluster to ESXi on Nutanix cluster, please suggest the easiest way to migrate with no impact.

The Flow Gateway VM (FGW) for Nutanix Cloud Clusters In Azure(NC2) is the Lynch pin to having a your own Supercloud. The FGW is responsible for all VM traffic going north and south from the Nutanix cluster in Azure. This virtual machine allows outside communication from both cloud and on-premises services to the workloads running on the Azure NC2 Cluster.   The Flow Gateway VM connecting Azure and on-prem services to the Nutanix Cluster deployed in Azure.Once Prism Central is automatically deployed from the cluster creation process, the FGW deploys into the same VNET that Prism Central is using.  The FGW is a native Azure VM. The VM has two network inter

I  have a question about PD snapshot frequency.Referring to below link, a node with 32-64 TB HDD tier support NearSync and hourly snapshot with specify requirement (e.g. 14vCPU for CVM).Node Configurations for Snapshot or Recovery Point FrequencyIf I have a 64TB HDD nodes with 2 x 12 cores CPU, the CVM will configured with 12vCPU after foundation. Does it means that node not supporting hourly snapshot and NearSync?