Limited Time! 50% Off Advanced Training + Free NCM-MCI Exam
We are trying to setup SCOM Management Pack 2.4 with SCOM 2012 server. I have created LDAP (Windows Domain) account for Prism and IPMI access, i do able to validate with prism account but i could not IPMI. I am using AOS 10.5 with NX 1065 G6. [list=1] [*]I have tried to create IPMI local account and then tried to validate SCOM Management pack. It worked fine. [*]I tried to validate with LDAP account but i am getting below error. for better administration i am trying to use LDAP. [/list] [b]error validating ipmi account with "x.x.x.x" IP. Continue with next CVM Address? [/b] I have opened case with Nutanix. Just i want know whether Nutanix support to configure LDAP auth with SCOM. Any help will be much appreciated.
Can existing cluster expand cluster new node with different subnet? Thanks, Hendra
[h3]Hello,[/h3][h3]I have a hybrid cluster (3 nodes) with 2x1,9TB SSDs and 10x4TB NL-SAS drives. Is it possible to replace all the disk in the cluster to make it all-flash? [/h3][h3]What would be the procedure? [/h3][h3]Thanks!![/h3]
Hi, Foundation version 3.6-74ea4a6f download, Give me the link. (Standalone Foundation VM image for importing into VirtualBox or ESXi) I am going to test with an old version Foundation(3.6-74ea4a6f). I don't have this version. Do you have a download link? Thank you.
We've just gotten started with Nutanix, and I have a question about snapshots. Do I need to create a Protection Domain before I can create a snapshot? I'm not looking to take snapshots of a bunch of machines or have scheduled snapshots. I just want to make one snapshot of a single Windows server before I upgrade some software on it. We are running AHV as our hypervisor. Thank you
In the last few weeks we have been experiencing complete host CPU usage at 100% on all of our host(6 of them). We were never this high. When the system is at this level no one can do much on the ystem for a few minutes. The biggest change we did was add Bitdefender Gravity Zone to our system. We have about 650 VMs on the system. Memory usage hovers between 50-60% on all the hosts. We are running ESXI hypervisor with VMware Horizon to run our VDI system. Anyone have an insight into this situation? Is there any tweaking I need to do? What could be causing this?
Can someone confirm the drive placement for SSD and the SATA drives in our Dell XC740xd servers? On one cluster of servers, there are four SSD drives in bays 0-3 and in the other two clusters the SSDs are in the last four bays. I have only seen the SSD drives in the first four drive bays.
Hi All, is anyone can tell me if AMD processors are supported on Nutanix CE i want to get a server with AMD processors and want to install Nutanix CE
Hi A remote site on AWS has been configured earlier. The time sync drifted too far but that has been fixed. The remote site in Data Protection has this alert "Remote site connectivity not normal." It is an AWS instance. The remote CVM IP address is 10.162.10.115. The host ipaddress is unknown, the firewall rules are fully open and replication seems to be occuring. There is a site to site VPN specificaly for this instance It looks as though the aWS remote site was never configured with the local cluster as a remote site which is what most of the webinars and documentation suggest. The IP address will not open a web page on http or https, the only communication available to the AWS node is SSH. How does the configurationof the remote site get completed or how do I get rid of this alert ?? Prisim: 5.6.1 NCC Version: 3.5.2 LCM Version: 1.4.2381 Nutanix 20170830.124 (in cluster, standard AWS instance) Thanks
hi, my client want to migrate all their sles 12 vm's from AHV to their ESXi farm (SAP Hana), currently i'm using the vmware converter but not success, got error cannot query live Linux machine.. i did try this --> https://acropolis.ninja/export-a-vm-from-nutanix-ahv-to-vmware-esxi/ but process stuck in qemu-img convert, and my cvm will give an error "CVM Services Restarting Frequently".. any suggestion to make more easier? cheers, paLee
Create VM, Add windows server 2016 CD-Rom, 16 GB memory, 80 GB HDD Power on Launch console Console displays SeaBIOS (version 1.10.2-3.e17_4.1) Machine UUID And thats it no activity, no messages, nada
Contact me about NTP. By default, Prism Health checks NTP every 12 hours. I excluded two prism health check items. - CVM NTP Time Synchronized - Hypervisor time synchronized If NTP communication is lost, try connecting again?
Out Database team has been using ERA to deploy lab and test VMs. I noticed they are reporting ridiculous usage. Some of the machines report used more than half the total cluster storage and 3 times allocated. Any ideas?
Hi everyone, I m new to Nutanix and have just deployed my first cluster. I did all the updates I could find in Upgrade Software Settings. It brought the nodes up to 5.11.2.1 . I tried to run the checks again and it shows no available versions. I saw the notice for the release of 5.16 so I downloaded the manual update binary file and meta file. When I try to update it says unsupported. Edit: NOT SUPPORTED Current version was released after the Target version was released. Upgrading to Target Release version is not supported in this case. I check the support upgrade path wizard in My Nutanix and it says the 5.11.2.1 is newer then the 5.16 yet they were released the same day!? The Upgrade path shows that if I had the 5.11.2 I could update to 5.16 but not 5.11.2.1 ?? Will Nutanix have an update path for this? or am I stuck for a while? thanks everyone. Scott
Hi there, i’m trying to get an overview about using Rest API for Provisioning of nfs Ressources. Are there any examples for typical tasks (f.e. add/delete nfs share)? I can’t find any so far….. Thanks a lot for every helpful comment! :-) Daniel
Hello, first time to use IPMI. Need to mount ISOt to re-install ESXi. So I’m trying to launch Direct Console from IPMI (note that I just reinstalled Java). but still not launching. Any idea? Nutanix Support wasn’t helpful.
I have an opportunity to acquire some retired Nutanix memory. The retired memory is NX-1065-G5 nodes and our Cluster is NX-6035-G5. From what I have been able to trace they appear to use the same memory modules. Can anyone confirm this?
Can anyone let me know which steps are being involved when I expand Hyper-V cluster by using Prism? I have a Hyper-V cluster that being mixed by some AHV storage nodes and looks like I cannot use the Prism cluster expansion feature to add more nodes...
Dear All Is it mandatory to replace the node in a cluster with the same hardware? Can we replace it with a higher configuration(CPU)
Could some one help me to understand how to calculate CVM overheads? I mean witout using the Sizer. I'm prety sure that some time before I have seen something about that in the documentation but now is removed. Nutanix bible sows some infor Drive Breakdown section but I'm not sure that it is up to date. So my question is how I can calculate overheads for the below: SSD: [list] [*]Nutanix Home [*]Ext4 Formatting [*]Genesis [*]Cassandra [*]OpLog [*]Content Cache [/list]HDD [list] [*]Ext4 Formatting [*]Genesis [*]Curator [/list]
Good day! Now I can get File Server’s Disk Quota usage of my users +---------+-------------+---------------+----------------+----------------------+-------------+------------------+ | uid | fs_quota | used | principal_type | principal_name | quota_size | enforcement_type | +---------+-------------+---------------+----------------+----------------------+-------------+------------------+ | 1100500 | 0 | 1398094120448 | kUser | _default | 0 | kSoft | | 1101108 | 4294967296 | 93868544 | kGroup | MTL-A-900_Manager | 4294967296 | kHard | | 1101110 | 4294967296 | 338030080 | kGroup | MTL-A-900_Manager | 4294967296 | kHard | | 1101111 | 0 | 261950976 | kUser | _default | 0 | kSoft | | 1101117 | 0 | 2071973888 | kUser | _default | 0 | kSoft | How can I
hello, I would like to know if, in addition to our AHV hypervisor on the NUTANIX, if it is possible to add the ORACLE hypervisor
Hi,I had a problem with the NTP server configured on the Nutanix cluster, unintentionally changed the date to 09012020 instead of 01092020, the point is that after solving that problem, now the cluster reports to me Critical alerts dated September 1, 2020. The date of the NTP is already corrected, but Web Console shows some critical alerts, but those alerts are not shown with ncli, but are shown with Alert tool. I have try to aknowledge and resolved them, but they are NOT eliminated from alert_list.Does anyone know what I can do so that the web console no longer shows them?
Does anyone know the granular service account permissions? I can’t give it domain admin credentials.
Hello everyone, I'm having problems with the cd-rom assembly in all my VMs, I can't add it with an * .ISO image, and I can't remove or disassemble the existing cd-rom, can someone help.
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
