Solved

HiI am trying to install the community edition on three nodes and on each one it keeps on getting stuck on this screen I have tried multiple times and wait over 30 minutes any ideas? 

I have installed CE 2.0 on 3 Supermicro servers. AHV is up, and the CVM is running. The Genesis service is running on all 3 nodes. When I issue the command to create the cluster and use a comma separated list of IPs, I receive the following error (same error regardless of which CVM I run the command from):MainThread cluster:1001 Could not discover all nodes specified. Please make sure that the SVMs from which you wish to create the cluster are not already part of another cluster. Undiscovered ips : localhostThe localhost part is throwing me off. Any ideas? I can ping all the CVMs from all the other CVMs. I have restarted nodes, restarted genesis, and used the --skip_discovery with no luck. Any help would be appreciated. 

Hi all,Today we have Set up a Windows file failover cluster.WE have configured a volume group with one vdisk for quorum and one volume group with two vdisks for data.Windows see the two disks in the second volume group seperately. WE have attached the volume groups directly to the Windows VM.Why is the volume group seen as seperate disks?Should it not be only one? Regards,Thomas  

Hi teams,I try to register Azure environnement on Move 5.3 but always have “Time Out” error like belowRequiements are oki following this step .Any Ideas ?Thnx 

Hi,         I am doing 4 node AHV cluster decomission. I did all the steps and finally gave cluster destroy and ensure it was destroyed completely. I want to do factory reset of all the nodes where the hypervisor /cvm configurations like hostname, IP etc will we wiped out. Let me know the procedure on this. Thanks.

Hi experts,I'm currently facing an issue with one of the nodes in my cluster. Recently, I noticed that a node was marked as "detached from the metadata store" in Prism, and one of its disks is also listed as detached. Prism shows the disk as "Ready to be added," but I'm unsure if the disk is healthy or needs replacement.When attempting to SSH into the affected CVM to verify the disk's status, I found that I'm unable to access the CVM via SSH, although I can still ping it. The other CVMs in the cluster are responding normally. I tried SSHing into the problematic CVM from another CVM in the cluster, but I received a message saying it's unable to connect.The cluster is running on an ESXi hypervisor. I also attempted to open the CVM from the Vcenter console, but nothing is displayed, the CVM doesn’t respond.Has anyone experienced a similar issue or has any advice on troubleshooting this problem? Your guidance would be greatly appreciated.Thank you!

Is there a centralized document that discusses where logs should be for specific  processes through the cluster or is it broken down into each applications documentation?i.e. - I’m installing Prism Central and I want to watch the logging progress for the process that is running.One way I learn is to watch logs and see what the system is doing to try and understand flows but I can’t seem to figure out where exactly to look.Thanks  

I am doing 4 node AHV cluster decommission. I did all the steps and finally gave cluster destroy and ensure it was destroyed completely. I want to do a factory reset of all the nodes where the hypervisor /CVM configurations like hostname, IP etc will be wiped out. Please let me know the procedure for this. Thanks.

How can I find out the address of UUID when it is powered off? I need to edit some custom option by command “virsh edit vm_name” before power on.

Currently, my AOS Version is 6.5, Nutanix requires upgrading to AOS 6.5.3, but I want to upgrade to a newer version. How do you know that the upcoming AOS version will not affect the current AHV version?

Hello,We have an old VM that is in our Nutanix cluster. It is running an old version of Windows server, and our Cyber department does not want it connected to the network. There has been a request to retrieve historic data from the server.  Is there a way to boot the server with the network disconnected and use a USB drive connected to the Nutanix host to export the data? If there is no way to do that what other possibilities will work? Can the virtual disk from the old server be mounted on a new network connected VM? Thanks

Hi team,When I try to log into the PRISM web interface, I get the error message "Unable to authenticate. Please contact the Nutanix administrator." This has never happened before. What should I do in this situation?  

HP DL380P Gen 82x Xeon E5 2667128GB RAMboot: 128GB SSDhypervisor: 1TB SSDstorage: 1TB HDD=============================Thanks in advance for any advice! Everything installs fine. I selected the ‘single node cluster’ option in installer and put my local DNS server. I waited the ‘15 minutes after installation’ for the cluster to be automatically created.=============================I do see ports opening on the CVM but not 8000:Starting Nmap 7.94 ( https://nmap.org ) at 2024-08-15 16:58 Atlantic Daylight TimeNmap scan report for 10.110.10.101Host is up (0.0033s latency).Not shown: 960 filtered tcp ports (no-response), 33 closed tcp ports (reset)PORT     STATE SERVICE22/tcp   open  ssh111/tcp  open  rpcbind2099/tcp open  h2250-annex-g2100/tcp open  amiganetfs2103/tcp open  zephyr-clt9876/tcp open  sd9877/tcp open  x510MAC Address: 50:6B:8D:F7:85:3A (Nutanix)=============================$ cluster status2024-08-15 12:06:08,460Z INFO MainThread zookeeper_session.py:191 cluster is attempting t

Hello everyoneI am trying to move a VM from my VSPHERE environment to my AHV environment using Nutanix Move. I am able to add the source and target without any problem, but when I launch the migration after a few minutes I get this error: Failed to get inventory for source 'vcenterfrbec01.bechard.local'. [Location="/hermes/go/src/srcagent/client/srcagentclient_grpc_impl.go:97", Msg="rpc error: code = Unknown desc = panic triggered"] Source Agent Client error. (error=0x301c)Please help me

I am preparing for Nutanix NCA 6.5 Exam, can someone tell me Nutanix test drive is free for practice or not?

Okay, so I am still seeing weird behavior on my AHV server.At present I am unable to log into the console. Let’s say the username password is root:test. It’s not, but let’s say it is. It tells me it’s wrong, try again. Lather rinse repeat.I go to my PC and ssh into the same box, it works. Here is what it looks like:userpc:~> ssh root@nutanix1 Nutanix AHVroot@nutanix1's password:  Last login: Mon Jul 15 20:14:14 UTC 2024 on tty1Last failed login: Tue Aug 13 18:46:23 UTC 2024 on tty1There were 11031 failed login attempts since the last successful login.Last login: Mon Jul 15 20:14:14 2024I run a command:[root@NTNX-cdb56c24-A ~]# uname -a Linux NTNX-cdb56c24-A 5.10.139-2.el7.nutanix.20220304.342.x86_64 #1 SMP Wed Oct 5 12:00:00 UTC 2022 x86_64 x86_64 x86_64 GNU/LinuxI logout.[root@NTNX-cdb56c24-A etc]# exit logoutConnection to nutanix1 closed.I immediately try to log back in…userpc:~> ssh root@nutanix1Nutanix AHVroot@nutanix1's password:  Permission denied, please try again.What in

Following on from this post:https://next.nutanix.com/move-application-migration-19/how-to-provide-guest-credentials-when-creating-move-plan-through-api-41667Trying to add credentials to my move plan, via the prepare api -https://www.nutanix.dev/api_reference/apis/move.html#tag/Plan/operation/preparePlan Anyone know the format or have an example of the prepare payload?  I have this:{  "Spec": {    "RunInBackground": false,    "GuestPrepMode": "manual",    "CommonCredentials": {      "WindowsPassword": "<<removed>>",      "WindowsUserName": "user@my.domain"    }  },  "VMs": [    {      "UUID": "1234567-bd99-5555-955f-d444094bd5fb",      "VMId": "vm-123456",      "Password": "<<removed>>",      "UserName": "user@my.domain"    }  ]} and  get the following error: Invalid input parameter for operation: 'prepare migration'. Parameter: 'PrepareVMsInput VMs'The UUID & VMId matches the VMs in the move workload.

Hi, We’re trying to run a POC initially on hardware that has a ASMB IPMI, this appears not supported for foundation deployment. We’re a bit confused about what we do as the documentation for ipmi-less installations isn’t really clear - any help would be greatly appreciated as its stopping us from doing any initial POC testing. We’ve tried multiple routes to install AHV/AOS but all seem to be falling flat at the moment.Foundation VM is unable to deploy to the IMPI targets, gives the Incompatible error. Does not auto discover targets, IPMI is a ASMB9-iKVM Attempts to manually create ISO on VBOX VM not successful, ISO is created by VM but unable to boot stating a kernel error. Tried multiple attempts at ISO and burning in different ways but no luck at all.

Hi teams,i’m looking for nutanix collections icons for visio or drawio diagrams.Thx

In the past, we have built clusters with metro sync (AHV) at 2 Locations and a 3rd for witness.Customers want to get an infrastructure what can tolerate the loss of one Location.Can we stretch a 3 node Cluster across all 3 Locations, one node in one Location?RTT is less than 5ms.In this case, what network topology is required?

Hello, I have instantiated a new cluster and I can’t seem to figure out why the Network Visualization won’t work for my cluster.  LLDP is enabled on my Meraki switch. I can see when new devices join my network as Nutanix on both my eero and firewalla. When I do lldpctl from the host it shows the following:-------------------------------------------------------------------------------LLDP neighbors:-------------------------------------------------------------------------------Interface:    eth0, via: LLDP, RID: 1, Time: 1 day, 01:01:39  Chassis:         ChassisID:    mac ac:17:c8:2f:de:80    SysName:      Home - switch    SysDescr:     Meraki MS225-24P Cloud Managed PoE Switch    MgmtIP:       x.x.x.x    Capability:   Bridge, on  Port:            PortID:       ifalias 9    PortDescr:    Port 9    TTL:          120  VLAN:         1, pvid: yes  Unknown TLVs:    TLV:          OUI: 00,18,0A, SubType: 1, Len: 4 00,2C,32,89----------------------------------------------------------------------

I’m trying to retrieve all VM and CVM using the following endpoint in PowerShell https://example.com:9440/api/nutanix/v3/vms/listI get all VM information back as requested but unfortunately I’m not getting any CVM and there is no information related to this in the offial API documentation.As far as I understand in version 1 you would get all vms and cvms using same endopint (vm/list)Is there something I’m missing to set up in order to get the controller vitrual machines ? {    "kind"  = "vm"      "length" =  50000    "offset" =  0}

I completed a CE 2.0 install, I can access AHV and CVM from console, but not from the outside network. Do I need to modify iptables or do something specific with the bridge or vswitch? This is a single cluster on an hp dl380 gen9, I am only using 1 nic and my node is on vlan 20 with IPs 10.1.20.20 and 10.1.20.21 for AHV and CVM in my test lab. I have not set vlans on ahv or cvm. If i plug my laptop into vlan 20, I can’t ping or ssh to ahv or cvm. Any help would be appreciated.

I would like to create a nested vSphere environment on a Nutanix cluster for testing move.I downloaded the last ova from Broadcom flying and configured the NIC model to E1000 on VM but when ESXi boots, I’ve always a NIC error.(“ no compatible network adapter found…..”)Help appreciate.Thanks,nested image > Nested_ESXi8.0u3_Appliance_Template_v1.ovaAll AHV platform up to date.

Hi, If I enable VLAN trunking at VM level, say for example VLAN 100 and VLAN 200. Do I need to assign two different IPs in the same NIC for each VLAN?