How It works

Below are new knowledge base articles published on the week of April 4-10, 2021.KB 9952 - NCC Health Check: list_vms_with_qos_attrs KB 10350 - NCC Health Check: rdma_enabled_check KB 10482 - Getting Error Message "You’ve uploaded an invalid cluster summary file" When Licensing a Cluster KB 10668 - NCC Health Check: list_containers_being_converted_to_aes KB 10955 - Create Category in Prism returns "The name you entered is in use" even though

I migrated 2 linux servers from Xen Citrix successfully. In the image configuration, can I delete the disk images or if I do that the VM will no longer function.

Now I am studying at Nutanix University. I sometimes see “hot spots” like “eliminate any hot spots” what is exactly means “hot spots”? is it performance of the node or storage degraded? 

Hi,Looking to automate some reports using the Rest API. So far I can successfully pull out CPU, RAM and Physical & Logical storage cluster wide and snapshot details but am unable to calculate the values as shown on the capacity runway when viewing a cluster in PC.. specifically the storage usage figure for ‘snapshots’ and ‘system.Anyone know how these are calculated?Thanks

Hi,Can anyone tell if there is an endpoint in v2 to get stats for VMs? I don’t see it under the VM category. Thanks!

I want to gather data for the following stats metrics using the REST API v2. I understand that I need to put the metrics ID as part of the parameters, is that correct?In addition, can anyone tell me the ID for the following stats metrics?Disk Usage (%) GPU Framebuffer Usage GPU Usage GPU video decoder Usage GPU video encoder usage Memory Usage (%) Network Rx Bytes Network Tx BytesThanks!

I want to use the stats endpoints in the API v2 but the metrics are not documented, how can I get the list of metrics available for each stat endpoint?

Below are new knowledge base articles published on the week of March 28-April 3, 2021.KB 8378 - NCC Health Check: Check Interface Configuration Files KB 10075 - NCC Health Check: ngt_client_cert_expiry_check KB 10743 - NCC Health Check: pulse_enablement_checks KB 10966 - Using storage_container_reference functionality with Nutanix provider for Terraform fails with error "SPEC_INCOMPATIBLE_ERROR" or "INVALID_REQUEST" KB 10980 - Hyper-V VM cre

What is FLR? What’s the purpose of the /flr endpoint? 

Trying to save Nutanix Bible to read as e-book offline. Can’t print page to PDF as most of grafics can’t save

Hello guys,Is it possible to extend ACI VxLAN to Nutanix AHV OVS (using Opflex agent maybe), in other words can we integrate it to ACI ?

I can ping to AHV from my pc. I can ping to CVM from AHV via address 172.x.x.x  and internal address 192.x.x.x But I Can Ping To CVM From My PC.

Want to know the maximum number of VLAN(802.1q) interfaces than can be created on each bridge of AHV. I cannot find any documentation or matrix about this. Thank you.

Recycle bin feature is available from AOS 5.18 onwards. With help from Nutanix Support, the recycle bin tool helps you to restore deleted storage entities (guest VMs and volume group vDisks) and manage the recycle bin itself.After you delete a guest VM, the configuration file and disk remain in the recycle bin for up to 24 hours. After 24 hours, these files are deleted. The files are deleted in less than 24 hours if your cluster is unable to maintain sufficient free disk space.Recycle Bin Limitations and Guidelines The recycle bin stores vDisk and configuration data for up to 24 hours. After 24 hours, these files are deleted. The files are deleted in less

How do I check hot and cold data by virtual machine? I'm going to migrate the virtual machines of the existing nodes to the node that I'm going to buy new ones. So, I'd like to check the hot and cold data of the virtual machines, respectively.

Below are the top knowledge base articles for the month of March 2021.KB 7503 - NX Hardware [Memory] – G6, G7 platforms - DIMM Error handling and replacement policy KB 4141 - Alert - A1046 - PowerSupplyDown KB 1540 - What to do when /home partition or /home/nutanix directory on a Controller VM is full KB 1113 - HDD/SSD Troubleshooting KB 4409 - LCM: (Life Cycle Manager) Troubleshooting Guide

We have 3 nodes with 2x960GB SSD and 4x4TB HDD.We need to expand storage (and storage only as it is going to be used to store cold data - we do not need additional processing power or RAM)Question 1: We simply added two 12TB HDDs to each node. Now each node has 2x960GB SSD, 4x4TB HDDs, 2x12TB HDDs. Everything is working fine, but we were told that this is not recommended. What is the problem with this configurationQuestion 2: Assuming the configuration in Q1 is not recommended and we want to end up with each node having one type of HDDs. We were told that we can upgrade the existing 4TB HDDs with 12TB drives. What the right procedure would be:  a) Mark one 4TB drive for removal, remove it, insert 12TB drive in place of removed 4TB drive. Repeat 4 times for a node. Resulting configuration - 6x12TB HDDs per node  b) Add two more 12TB drives first, then mark for removal and remove four 4TB drives (one by one). Resulting configuration - 4x12TB HDDs per

Hardware failures are a part of any datacenter lifecycle. The Nutanix architecture was designed with this inevitability in mind. A cluster can tolerate one or two failures (depending on the replication factor of the cluster or container) of a variety of hardware components while still running guest VMs and responding to commands through the management console. Many of these failures also trigger an alert through that same management console in order to give the administrator a chance to respond to the situation.Nutanix provides the ability to tolerate rack failures for extended data availability, in addition to drive, node, block, and network link failure.Block fault tolerance lets a Nutanix cluster make redundant copies of data and m

Failures are part of everything and Nutanix Clusters is not immune to it. But how we plan for failures determines the versatility of the product or a person for that matter!!Nutanix categorizes the type of failures into availability domains essentially based on type of failure. Nutanix provides the ability to tolerate rack failure for extended data availability, in addition to drive, node, block and network link failure. Node FailureA Nutanix Node comprises Physical host and a controller VM. Both these components can fail without any impact to the Nutanix cluster.CVM failureWhen a CVM fails, an a

Hi folks, In VMware, we need to enable EVC to be able to do vMotion between diff processors, what about AHV? what should be done or is it working smoothly?

Below are new knowledge base articles published on the week of March 21-27, 2021.KB 10516 - [ Karbon ] PE cluster is showing alerts for VGs used by the Kubernetes cluster(s) KB 10651 - NCC Health Check: metering_rest_connection_check KB 10768 - A number of VMs may be missing from the list when monitoring cluster using SNMP protocol KB 10813 - "UnicodeDecodeError" and "UnicodeEncodeError" for VM operation KB 10936 - Duplicate scheduled repor

NVIDIA GPUs primarily have two modes of operation: Compute and Graphics.Compute Mode: the GPU operates within a configuration that is optimized for high-performance computing applications.Graphics Mode: the GPU is optimized for graphics processing and can subsequently be assigned into vGPU profiles for virtual machines (vGPU profiles cannot be used while in compute mode).Various NVIDIA GPUs are provided with default configurations for either of these modes and, sometimes, it is necessary to change the mode to better suit the corresponding workload of the host.In previous models of GPUs, it has been necessary to temp

We have numerous clusters and each have their own hardware platform (and in a couple of cases, we’ve even mixed hardware models within the same cluster). Our current Nutanix footprint;VENDOR         MODELS        NODE COUNTSuper Micro    NX-8155-G7    12Super Micro    NX-1175S-G6    7Super Micro    NX-3060-G7    6Dell                 XC630-10         14Super Micro    NX-8035-G7    12Super Micro    NX-8035-G6    36Is there a preferred or recommended solution for hardware monitoring and alerting? For instance; Dell OpenManage (DOM) or Supermicro Server Manager (SSM). I don’t readily know if either would support the others solution (like DOM supporting IPMIs or SSM supporting iDracs) Or, would Prism Central (and Prism Element) be sufficient for hardware monitoring and alerting?We currently have and are using DOM but not for the SuperMicro hardware so I’m wondering if I’m potentially missing out on a better soluti

Nutanix Era is a suite of software which automates and simplifies database management, bringing one-click simplicity and invisible operations to database provisioning and lifecycle management (LCM). Starting with Copy Data Management (CDM) as its first offering, Nutanix Era enables database admins to provision, clone, refresh and restore their databases to any point in time. Through a rich, but simple to use, UI and CLI, they can restore to the latest application-consistent transactionEra enables you to easily provision database environments (either production or otherwise) on your Nutanix clusters. Also, you can only provision the database server VM that hosts a database, so that you can later create or clone databases on that database server.Some of the components include

Below are new knowledge base articles published on the week of March 14-20, 2021.KB 9365 - Alert - A802002 - AncDnsUnresolvable KB 10693 - Alert - A130334 - NGT CD-ROM not Unmounted on the VM KB 10694 - Alert - A130192 - Conflicting NGT policies KB 10746 - AHV Guest VM Boot Order Being Modified to Default by Prism After Any Config Save KB 10847 - LCM Pre-check: "test_ncc_checks"