Nutanix Cloud Manager

Prism Central pc.2021.5 added the ‘Resiliency Status’ to the Storage widget which is a cool idea. However all of my PE clusters in this widget show as Unknown with a callout that reads “Details are unavailable in Clusters < 6.0”.Looking at the latest downloads available online I do see a version 6.0 of AOS for the STS release path so I assume that we’ll have a wait a little while longer for us LTS customers.  

In case you have to configure a snapshot frequency for a business critical application that can sustain a maximum of 40 min of data loss, is it better to configure the snapshot frequency of the protection domain at 15min or is it better to set a 30min frequency?

Do you still wonder which one to use Number of vCPU or Number of Cores per Socket when configuring a VM? You read something about it and it makes sense and you think you will now remember only to stumble upon the same dilemma sometime later. Shall we clear this once and for all?   vCPU and cores are inherently bound to a NUMA node which, in essence, is as a processor with direct attached memory. Under some (but not all) conditions, accessing memory or devices across NUMA boundaries will result in decreased performance. Hence the goal is to configure a VM with CPU and memory values that remain within the boundaries of a single NUMA node. The exception would be a NUMA-aware application. Another thing to remember is that hot add of the number of cores is not supported on AHV meaning adjustment of number of cores value for a VM requires the VM to be a powered off.   To ensure optimal performance of the VMs in the cluster follow simple rules:

Beam is a Cost Governance SaaS product offering by Nutanix that helps cloud-focused organizations to gain visibility into cloud spend across multiple cloud environments.The following are a few of the key functionalities that help you with the cost management: Provides you with deep visibility and rich analytics detailing cloud consumption patterns. One-click cost optimization across your cloud environments. Proactively identifies idle and underutilized resources, and delivers specific recommendations to resize infrastructure services and ensure optimal cloud consumption.  

Hi Team,We could see multiple alerts are getting triggered for the "cluster_IOPS" as mentioned below and kindly assist us on it to resolve it . Alert: QOS_NUTANIX_CLUSTER_IOPS = 5619.0 on XXXX has crossed the informational static threshold of >3000.0

HI, I need help The current version of Nutanix isAOS 5.10.10.1AHV 2017830.396is.I'm having a problem with the SMTP side, so I'm asking this question.I've been working with a firewall engineer.After opening all ports, I tried to send an SMTP test mail, but I did not receive it.All AHV hosts have a gateway.The problem is that it succeeded in sending the test mail normally, but did not actually receive the mail.SMTPConnection status indicates Failed.The firewall engineer said that the ping test packet was confirmed, but the packet when the SMTP test mail was sent was not.I need some advice on which part is the problem.

I have been trying to make work the blueprint in:https://next.nutanix.com/community-blog-154/self-service-in-the-era-of-dbaas-32849But everytime i get an error about the databaseparameterid. Does anyone have a new version of this blueprint or something i could use?

Is Prism Pro  necessary to use Nutanix Flow or can I  use Prism ?

Showback allows you to configure and monitor the resources cost of your application blueprint. Perform the following procedure to enable showbackBefore we begin:Ensure that Showback is applicable for Nutanix and VMware through vCenter platformsProcedure: Log on to Prism Central as an administrator. From the Prism Central UI, click Services > Calm Click the Settings icon on the left pane.

I’ve been using API to fetch VM info from v2 API from Prism Central/PrismGateway/services/rest/v2.0/vms/0a771e50-a3f5-4b12-838d-2820884a6095/?include_vm_disk_config=true&include_vm_nic_config=trueThe response I’m getting is as below{"message":"Error occurred while getting VM list: RPC error kTransportError raised: Error response code: 404","detailed_message":null,"error_code":{"code":1202,"help_url":"http://my.nutanix.com"}}This same API was working beforeTried VM from another cluster same response V2 APIs from individual clusters are working with same UUIDAny help is appreciated, also if there is any documentation available where I can check what these codes mean

Hello, is it possible to backup a prism central VM with a protection domain ? and after restoration will it recover its functionality (leap among others) thks

Hello Everyone ,Yesterday , we upgraded AOS to 5.20 LTS and an alert appeared on Most VMS as follow NGT should be upgraded to the latest version , we need upgrade all VMs by PC when upgrade the VM the following error appear INTERNAL_ERROR:internal server Error but when upgrade manual the operation succeeded , for your info VM OS 2016 .Thanks 

 Can I check which Client is using vDISK in Prism?I want to check the Client assigned the volume group.I can compare iqn and check it, but I wonder if there is an easier way than that.(ex.through the CLI in AHV, CVM) 

Hi folks! Does anybody backup Prism Central VMs in a Protection Domain? I was just thinking about that, since I need to move all VMs from one AHV cluster to another. That's because I need to reinstall the cluster with ESXi for compatibility with some VMs. The only way I found out is to create Protection Domains and replicate the VMs to the new cluster. So does this work with PC VMs also? Regards, Andy

Hi all,I have a requirement to automate patching of Operating systems (Windows and Linux) For example - the process would be, Take a snapshot of the server, deploy the updates, test the server services are functioning as expected, if not restore the snapshot.Customer is using ManageEngine Desktop Central which is being used to deploy software and patch client computers.Is it possible to integrate Calm with ManageEngine Desktop Central to achive above automation ?If not what would be alternate way and its overall workflow ? I am looking for direction and some supportive.

Hi Experts,We have a requirement to automate SOC process as much as possible,For example - using ticketing system (JIRA), when a request is raised to block a large list of IP's or domains, the ticket should be implemented automatically with out human intervention.Need to understand,If it is possible to integrate CALM with JIRA workflow ? and how ? If it is possible to automate block/release process of IPs/Domains at security devices with the help of CALM? and how ? What other security related tasks we can achieve with the help of CALM here.Looking for some direction and supportive to move ahead.

I got some issues with having some logs showing up in Splunk. I managed to get the account login [Fail & Successful] by adding in the PRISM modules but now I need to get the account creation / deletion showing up in Splunk. I can’t seem to find the msg be it account or creation. Is there a need for me to add in other modules as well? I am kinda stuck with this step. Any help would be greatly appreciated.

How do I get the Hostname/IP of a service running in an application?I assume that by querying the api for the app object /apps/{uuid}, I would get the list of the services and therefore get the uuid of the vm.  But I can seem to find the vm uuid.Any ideas ?

I am working on setting up a Custom role for end users to self serve market place apps.  Problem is that I can’t see where I can remove access to Polices (Image Placement), Hardware (GRU), and Files. They don’t appear to be in the action list.

Is there any specific way or prerequisite to apply the Nutanix Clam license. I can see the license is available and free but when I select the quantity ( 1 Pack), it does nothing.

How to calculate cluster cpu ready time using python and REST API? I am having performance issue in finding whether my clusters are over utilized or under utilized. If I can get cpu_ready_time_ppm or cpu steal time for each cluster, it will help us ? Let me know if there is any other direct way to find it.An early response will be highly appreciated.

I am facing below error while logging on to Prism Central.“""state": "ERROR", "code": 401, "message_list": [{"reason": "AUTHENTICATION_REQUIRED", "message": "Authentication required.", "details": "Basic realm=\"Intent Ga… “” Any one seen this and can help fix it. ThanksAmit

I tried to log in with AD user in REST API Explorer.I am getting error asmessage": "No permission to access the resource. <Request 'http://nmegh02.prd.dcservices.in:9440/v3/vms/c2784552-c129-4f49-9d0e-b20b32c2a5e4/clone' [post]>", "reason": "ACCESS_DENIED"I have given FULL ACCESS to roles of current AD user .i.e VM and APP → FULL ACCESS in Roles Section.What other permission i need to give so that AD user can execute REST API?

Is there anyway to send an email from a blueprint task ?

I am working on setting up a Custom role for end users to self serve market place apps.  Problem is that I can’t see where I can remove access to Polices (Image Placement), Hardware (GRU), and Files. They don’t appear to be in the action list.