Nutanix Cloud Infrastructure

I'm trying to deploy FortiAuthenticator v5.5 VM but running into issues on AHV. I've tried creating the VM using the files from Fortinet but no instructions when using AHV per this guide: https://s3.amazonaws.com/fortinetweb/docs.fortinet.com/v2/attachments/5795878a-1f78-11e9-b6f6-f8bc1258b856/fac-vm-install-guide-43.pdf The files I've used are the following: KVM - fackvm.qcow2, datadrive.qcow2 Vmware - fac.vmdk, datadrive.vmdk screenshot attached of my options from Fortinet Created vm adding cloned disk using the files above Set vCPU, Mem, added NICs Fortinet suggested I use the vmdk files but still getting the error in the screenshot. I'm new to AHV so any help would be appreciated.

Anyone successfully running Fortinet FortiSandbox VMs on AHV in their environment. The VM itself is able to deploy, but it fails to create its on VMs to test executables on.

Can we Testing or Demo of Flow on Community Edition

Are there any VMware 6.7 "gotchas" that I need to worry about before upgrading? We're on 5.10.2 running on Dell XC series for a little context. Thanks!

I’m planning to move a Windows Server 2012 R2 Datacenter Edition VM from Hyper-V 2012 R2 to AHV on AOS 5.10.2 today. I have created a similar (but not cloned) test VM in the environment and migrated it yesterday with no issues. UEFI worked fine. Today in my final prep I’m seeing that in newer versions of the Nutanix documentation (AOS 5+) that this migration and VM type (AHV with UEFI) is listed as Limited Support and “Not recommended for Production”. Is this a showstopper? Are other customers moving important production Gen 2 UEFI Hyper-V VMs to AHV? Scenario Support Level Generation 2 VM (UEFI) migrated from Hyper-V to AHV Limited support. For information about configuring UEFI for VMs migrated from Hyper-V, see Post-Migration Tasks, Windows VMs. UEFI VM migrated from ESXi to AHV Not supported Note: The support levels in the second column are defined as follows: · Limited support. Nutanix recommends that you not use the configuration in product

We are using the ASync Data Protection between two sites to replicate our VMs. But that is only taking a new snapshot of an existing VM and replicating that snapshot. I would like to have replication setup for some of VMs so that the VM and all of the snapshots we've made of it outside of Data Protection are replicated as well. We may need a very specific state of a VM at our remote site. Using only the Async DP snapshots won't fully meet our needs. Is there any way to do this with the existing Nutanix software? I'd rather not purchase something third party to solve this problem.

Hello all I'm trying to establish the optimal disk layout for a VMware MS SQL 2016 2 node guest failover cluster that will have a single SQL instance hosting multiple small to medium sized databases. Unfortunately we don't really have the funds for licensing to do the recommended approach of creating lot of small VMs to host these databases, so we need to consolidate where possible. I've been reading though the Nutanix SQL 2016 best practice guide and it's raised a few questions. I've decided to allocate multiple vdisks specifically for database files, so I'd have a few database files to each vdisk instead of one vdisk with all the database files on it. I'm assuming this approach might be better due to each vdisk having a 6GB Oplog allocation and so more vdisks would prevent a single oplog from quickly over filling? Is there any there real a benefit here to having more vdisks to spread the databases across or does this only really come into play when you split indi

So over a year ago, there were reports of AHV turbo coming to us in 5.5. We are now at 5.10 and there have been no reports of VirtIO drivers for Windows supporting MultiQueuing. Any ideas as to why?

Wanted ask the community for some feedback on the topic of SQL Server 2008/R2 End of Support. My fellow Nutanix Solutions team members @gregwhite @Chris Paap, myself and others were discussing about SQL Server 2008/R2 End of Support and how that would impact IT? Can you help us by sharing your thoughts, actions, tools around DB/app upgrades, migration etc related to SQL Server 2008/R2? You can take the survey here: https://www.surveymonkey.com/r/VJ2NWXS

Hi all, I have a customer running two DCs, using veaam to replicate VMs between sites. They are renewing the infrastructure at Site 1 and are looking to adopt EMC storage for native (recoverpoint) host aware SAN to SAN replication. Until they update the infrastructure running on site 2 they will need to continue using Veaam in the interim. I'd like to recommend they take a look at Nutanix however first need assurances that they can continue using Veaam to replicate between ESX on Nutanix & ESX on legacy. The idea would be to then go full Nutanix at both sites (once site 2 is refreshed), swap out to AHV and live the cross site replication dream 🙂 Advice appreciated! Thanks Patrick

A customer asked.... Is there a sort of table to compare the Acropolis version with che KVM corresponding one? Thank you!

Hi , Anyone would know if RHEL is supported to run on Nutanix Acropolis Hypervisor (AHV) ?

Interested in the cost for Xi LEAP. I cannot find any estimated costs for this new service and need to know how it is priced. Anyone have information on this?

The following shows the available Load Balacing options currently available in vSphere 5.5 along with the recommended configuration for Nutanix environments for both Virtual Distributed Switches (VDS) and Virtual Standard Switches (VSS). NIC Teaming & Failover Recommendation

Hi, I just added a new storage disk onto a VM and copied data onto it then realize we'd rather just expand the current one so I deleted the new disk and when I go to expand the current disk it is showing that I have no more space to use to expand. Where is the space going after I delete disks? Thanks,

Using near sync replication in AOS 5.5 means that normal snapshots on VMs cannot be initiated by external backup tools like comtrade, rubrik This is a bit of a showstopper. If we need an RPO of 15 minutes on AHV, we have to use nearsync - but then we can't backup VMs off the cluster When will Nutanix resolve this rather major downside?

Hi Team, We use SCVMM to manage all our VM's and we are planning to move some machines to the AHV environment..Can you please confirm whether we will be able to do the live migration my VM's from HyperV to AHV?? Regards, V.Pradeep

Is it possible to implement throttling at a per VM level? The thoughts/scenario behind the question: We have had on a couple occasions where we found a VM (different in each occasion) that was running away with storage controller IOPs. Of course the goal is to get the actual issue resolved for the offending VM, but we would like to be able to implement throttling to be able to assure other VMs in that cluster don't suffer when this does occur. Disk I/O has been the scenario so far, but could also see the need to throttle CPU, memory, and/or NIC throughput at some point.

Without a backup solution, am I able to restore a vm on AHV using the built in RF?

Hello community, it is possible Nutanix remote snapshots to a remote site and additional snapshot to a 3rd remote site? Environment: Small ROBO Cluster ROBO Backup Node (1155S) Central Backup Target Small Robo Cluster > Remote Snapshot to ROBO Backup Node (1155S) > Remote Snapshot to Central Backup target.

Is there a way to deactivate an old Protection Domain and move the snapshot data to a new Protection Domain?

Hi Everyone, im just cruious about this scenario, I have 3 server type 2310 with single ssd, So if SSD FAIL on 2 different server at the same time what will happening?

Does anyone know of any official documentation on the best way to perform a migration from Hyper-V 2016 on Nutanix to a new AHV cluster (not an in place migration)? Or any good guides on doing this? It is going from Hyper-V 2016 to AHV but 2012 would be helpful. I have found a few articles but they are either quite old or not very well written. https://vmwaremine.com/2016/04/11/migrate-windows-2012r2-from-hyper-v-to-nutanix-ahv/ https://vmwaremine.com/2016/06/06/migrate-hyper-v-generation-2-vm-to-nutanix-ahv/ http://vcdx56.com/2018/06/migrate-hyper-v-2012r2-vms-to-nutanix-ahv/ Thanks

Hello, I have turned on Windows Dedup for some of my file servers that reside on AHV, however the storage reduction is not reflected on Prism. Any thoughts as to why? I wish I could run the Capacity Dedup from AHV however the last time that I turned it on I received the following alert: Do not replicate protection domain XXXXXXX comprising entities from the storage container that have deduplication enabled to a single node remote site XXXXXXX. (XXX denote omitted field)

How do virtual machines on AHV migrate to vmware?