Deployment Success

Below are the top knowledge base articles for the month of March 2024.KB 6082 - inode_usage_check fails due to large amount of email files in /var/spool/postfix/maildrop directory KB 1532 - NCC Health Check: inode_usage_check KB 1540 - AOS Only - What to do when /home partition or /home/nutanix directory on a Controller VM (CVM) is full KB 7503 - NX Hardware [Memory] - DIMM Error handling and replacement policy KB 1113 - HDD, SSD,

Below are new knowledge base articles published on the week of April 7-13, 2024.KB 15210 - Nutanix Files: REST API user creation fails for AD user with "Request failed with status code 500" KB 16052 - AAG DB provision might fail if Active Directory Sites and Services configuration is inaccurate KB 16205 - Networking: Nutanix AOS and Juniper QFX Configuration Considerations KB 16457 - Nutanix Files : Rubrik backups for Nutanix distributed shares may fail due to DNS misconfiguration

I was wondering if there are any requirements with regards to installing Nutanix on a CISCO C series hardware managed by an FI switch.I have enough CPU resources, Memory and storage.Ive set the local disk on a raid1 after the error on screenshot1, I went and removed all old partion on this raid (Old ESXi Installation) and even initialized and recreated the raid virtual drive after the error on screenshot1, I went and removed all old partion on this raid (Old ESXi Installation) and even initialized and recreated the raid virtual driveSecond screenshot if after the 2nd attempt to install on a newly created Raid 

I have an OVA which I usually deploy on VMWare. when extracting the vmdk’s from it I get two of them. I am booting using a legacy bios (because the UEFI version just hangs in “press f2 for boot manager”) from the current disk and I get the following error:  Can anyone please help in resolving this issue? Thank you.

I have an old unused cluster that I would like to bring up as a test unit.  Is there any guide available on how do I go about setting this up?  Can’t call support as this is already EOL. Thanks!

Hi all,I have installed and configured in servicenow, but when I launch the blueprint and catalog it does not go to nutanix application.  

Hi frnds,  Facing attached error while launching Emulator on VM. Please guide if anyone has installed and launched emulator.  

Hi,I am trying to install the Nutanix CE on Single Node HPE Server.But i got problem while installing Nutanix CE. Can anyone help with this error?HPE ProLiant DL380 Gen9Raid 0 (4 x 300GB disk)  

When attempting to log in to Prism Central for the first time, I encountered the following issues despite using the default Nutanix username and password.  

Below are new knowledge base articles published on the week of March 10-16, 2024.KB 14768 - Issue while downloading Cluster Summary File KB 15843 - NDB - Discovery Script to Collect Host and Oracle Database Configuration details KB 15916 - Alert - A130399, A130400 - FailoverTriggeredForDecoupledVM, FailoverTriggeredForDecoupledVG KB 16259 - Nutanix Files - List quota usage for files written by a user in a given share KB 16284

I’m new to Nutanix.  I’m trying to evict a Vmware ESX node from a cluster to rebuild it with AOS and join to our AHV cluster.  Is there a good document on how to evict the node?I found this document that essentially saysSelect the Infrastructure application from Application Switcher Function, and navigate to Hardware > Hosts . The system displays the List tab by default with all the hosts across registered clusters. Select the target host checkbox, and choose Remove Host from the Actions dropdown menu.Prism pc.2023.4 - Prerequisites for Removing a Node through P

I have a Windows Server 2022 machine on which I installed the Nutanix guest agent version 4.0 via an executable, as it is a production server and cannot be shut down to add a CD-ROM. However, after installing the Nutanix agent, I tested communication with the CVM and received the result "communication_link_active: false".I installed the agent on another VM with the same specifications by mounting the CD-ROM and verified that it is version 2.0. In the communication test, I received the result "communication_link_active: true". NGT is enabled on both machines, and the AOS version is 6.5.3.7.

Hello all!  My work uses Nutanix in a three node cluster, but I didn’t have anything to do with setting it up.  For my home, I’m installing CE on a Lenovo workstation with a Xeon E-2134 processor, 16 gigs of ram (getting more).  I installed the CVM to a 250 gig Samsung.  I have a 500 gig SSD and a 12 TB HDD set for data drives.  The hypervisor installed to a USB 3 drive.The install didn’t throw any errors, but neither the host (10.3.0.5) nor the CVM (10.3.0.7) have a web interface.  Checking those IP’s there’s no port 80 or 443 open.  I can SSH into the AHV host, but that’s it.  I’m not sure what to do from there.  I saw something about running the cluster command from the cli, but the AHV doesn’t have that.I’m sure that I’m missing something basic.

After I tested different features about Prism Central I’d like to reduce the size of the VM. Now the VM has 18vCPU and 70Gb RAM, it’s to much for my normal use. Is it possible to reduce the vm?

I am new to this and to Nutanix. I am trying to create an SMTP Alert fro when any user logs into the cluster. I have SMTP configured and the test email has been successful, but when creating manual rules I get no alerts. To be honest I am getting no alerts period at this point.

How can I get Nutanix Move? When I go to https://portal.nutanix.com/ I get this. I’m running CE edition, and would like to test out moving from test ESXi to my CE edition. 

Below are new knowledge base articles published on the week of March 3-9, 2024.KB 16144 - Nutanix Files - "Server has no Shares" error in PC UI due to incomplete IDF sync KB 16191 - Windows VM BSOD after installing NVIDIA GPU driver KB 16213 - VM time zone defaults to UTC after Move migration KB 16257 - Application (stateful or stateless) crashing after restoring application snapshot on target cluster due to OCP permission issue

There's a security issueI think we should use a KEY-based approach when approaching CVM and AHV.I registered KEY and set lockdown mode, but from AHV to nutanix accountYou can access it, but the root account does not.Is it only available on the original Nutanix account?

Trying to install CE edition in a VM to test with, single node installISO mounts fine and installs, gets to the reboot prompt then fails to start AHV firstboot script  I took a look at the firstboot log, shown below Any help much appreciated 2024-03-07 16:21:57,622 INFO  Running cmd ['touch /root/firstboot/phases/expand_boot_partition']2024-03-07 16:21:57,625 INFO  Running cmd ['/sbin/iscsi-iname']2024-03-07 16:21:57,631 INFO  Running cmd ['/sbin/restorecon -R /etc/iscsi']2024-03-07 16:21:57,637 INFO  Running cmd ['virsh version']2024-03-07 16:21:58,076 INFO  Running cmd ['virsh net-list --all']2024-03-07 16:21:58,116 INFO  Running cmd ['virsh net-list --all']2024-03-07 16:21:58,156 INFO  Running cmd ['virsh net-define /root/net-VM-Network.xml']2024-0

I am working on converting my scripts to Powershell 7.x. I tried to use the Nutanix cmdlets 2.0.1 provided for Prism Central. Attempting to connect to Prism Central is failing. Six months ago I played around with it and it worked then but now does not.Our main Prism Central instance is pc.2023.1.0.2. We also have a test instance which is pc.2023.4. I get the same error when attempting to connect to either.PS H:\Scripts\Nutanix> Connect-PrismCentral -Server MLBPRISMTST1.cs.myharris.net -Credential $AdminCred -AcceptInvalidSSLCertsConnect-PrismCentral: Error from MLBPRISMTST1.cs.myharris.net: Could not connect. Please make sure to the remote server is Prism Central.PS H:\Scripts\Nutanix> Connect-PrismCentral -Server MLBPRISMTST1.cs.myharris.net -Credential $AdminCred -AcceptInvalidSSLCerts -ForcedConnectionConnect-PrismCentral: Error from MLBPRISMTST1.cs.myharris.net: Could not connect. Please make sure to the r

Want to download ISO NGT . Same process like VBox_Tools for example .

Nutanix Move is a cross-hypervisor mobility solution to move VMs with minimal downtime.  Our latest version, 4.9.1 is available for download. Refer to the release notes and give it a spin and let me know how it's working for you.Have a look at the latest post in our Product Updates section and read how Nutanix Move now migrates between 22,000 and 26,000 VMs to AHV per quarter!Nutanix Move 4.9.1 is now available Nutanix AHV and Nutanix Move: A Year of Remarkable Success and 100,000+ Virtual Machine MigrationsHow many VMs have you migrated using Move? Reply to this post and let me know. You never know, the one with the most may get some Nutanix swag :)

Below are the top knowledge base articles for the month of February 2024.KB 6082 - inode_usage_check fails due to large amount of email files in /var/spool/postfix/maildrop directory KB 1540 - AOS Only - What to do when /home partition or /home/nutanix directory on a Controller VM (CVM) is full KB 1532 - NCC Health Check: inode_usage_check KB 7503 - NX Hardware [Memory] - DIMM Error handling and replacement policy KB 6945 - How Up

Below are new knowledge base articles published on the week of February 25-March 2, 2024.KB 14597 - Operation failed. Reason: Repository Image Module File Server failed with error: 'Exception metadata shasum did not match expected sign.' KB 15970 - NDB -Oracle DBVM upgrade failing due to invalid literal for int() with base 10: 2,93g KB 16241 - Nutanix Files: Move Smart DR configuration from one PC to multi PC KB 16298 - DR | "Revert" workflow to restore the existing entity via Recovery Point will fail for secure boot or UEFI Enabled VMs