Nutanix Cloud Manager

Hi, How can I change the date format on Prism & CLI  it's currently mm/dd/yyyy and i'd like to make it dd/mm/yyyy Thanks

3 node cluster running vCenter / ESXi6.7 Also running Files. Should the Files VM on the particular host to be patched be shut down or moved? I know the Controller VM should just be shut down. Also, I think I’ve seen mention that I could load the ESXi patches somewhere/somehow into Prism(Element, Starter, 5.10.9) and Prism would manage the moves and shutdown? Thanks  

I have a client that is running Version euphrates-5.5.9.5-stable LTS - Starter License They have cleaned up some disk space inside of a windows guest vm.  They would like to reclaim that storage space from the virtual disk. Shrink it from a 3Tb to a 2Tb virtual disk.  Is there a way to do this? Thanks

One of my CVMs is throwing this alert: CVM threshold of 98 Percent Disk IO exceeded I can’t find anything published on this alert anywhere…  would like some assistance understanding this and how to mitigate it..   Ran a complete NCC check and it came back clean, just 1 warning.      

This article describes how to rename the CVM entity in Prism within the AHV environment. This does not change the hostname of the CVM displayed in a console/SSH session as the hostname is a value configured within the CMV OS and is independent of the Controller VM name entity recorded in the Prism entity DB (Insights Data Fabric). It is the same name as in CVM’s XML definition on the AHV host. It can be checked by listing VMs on the host. The name displayed is the name that is shown in the Prism Wen console. Starting from AOS 5.10.10, 5.15 and 5.16, change_cvm_display_name script is available on CVM that can be used to change the display name.  

This series of two posts provides a walk-through of Xi Beam Cloud Governance capabilities to give you a better understanding of what a CCO (Cloud Cost Optimization) can do for you. What is Xi Beam Cloud GovernanceXi Beam Cloud Governance is a feature rich tool that provides visibility, optimization, and automated control over multi-cloud deployments including both public and private clouds.As a multi-cloud governance tool, Beam organizes all the infrastructure information along three key pillars of cloud governance: Visibility: Xi Beam provides deep visibility into multi-cloud consumption patterns at aggregate as well as granular levels to easily identify cost drivers. Optimization: Xi Beam uses machine intelligence to continuously provide right-sizing recommendations and deliver more than 50 percent in cloud cost savings. Control: Xi Bea

Nutanix guest tools (NGT) is a software bundle that you can install in a guest virtual machine (Microsoft Windows or Linux) to enable the advanced functionality provided by Nutanix.   To know more about NGT,its limitation and the requirements You can give the following document a read NGT Guide    There are situation where NGT communication between the User VM and the Controller

There might be a situation  after a Prism Central upgrade you'll notice the following alert:   Critical : IDF data from cluster {cluster_name} (uuid = 0005xxxxc-59xx-xx6x-0000-0000000x7xxx)is not up-to-date.    There might also be a connectivity issue between Prism Central and Prism Element.    You will also notice that your cluster is disconnected from Prism Central and the PE. 

What is Beam?  Beam is a cost and security optimization SaaS product offering by Nutanix.  Beam helps cloud-focused organizations to gain visibility into cloud spend across multiple cloud environments. With the Cost Governance feature, Beam provides organizations with deep visibility and rich analytic detailing cloud consumption patterns, along with one-click cost optimization across their cloud environments.  The cost governance feature within Beam provides the following capabilities. Visibility into cloud consumption. Optimization of Cloud Consumption. Control over Cloud Consumption. The Security Compliance supports the following capabilities. Visibility into Security Compliance Optimization of Security Compliance Control over Security Compliance

For most of my vm’s that are in protection domains, the snapshot option is grayed out in Prism Centeral.  Hovering over the option I get a popup with message “One or more of selected VMs is protected via legacy DR feature.  Snapshots for these VMs can be taken from respective PE clusters only.”  This option is not grayed out for vms that are not in protection domains.  Why is that?  What are legacy DR features?

Let's say you encounter a situation where you want to unregister a cluster from Prism Central.  Unregistering a cluster through the Prism GUI is no longer available. This option was removed to reduce the risk of accidentally unregistering a cluster.   There could be different scenarios in which a cluster needs to be unregistered from a Prism Central like    Prism Central functionality is being evaluated but you do not plan to use the functionality. You manage your cluster or clusters using a different Prism Central instance. The

Since managing the infrastrucute is a complicated process, our customers tend to customize the AHV hosts names for identification and a general order in the cluster. Let’s say there is a situation where you want to change the hostname of your AHV host from default to something local to your organization and demands.    Do we have a process or a documentation guide to help you with the task?     The following knowledge base article How to rename AHV hosts will help you.     The solution is also documented in our AHV Administration Guide    

Did you know that Prism Central allows you to create your own custom alert policy? Not only this, but you can modify existing alert policies too.   Here is an overview of the steps involved in creating custom alert policy:-   Open the Alert Policies page. Switch to User Created tab → ‘New alert policy’. ‘Create an alert policy’ tab will open and you can select the details of the alert. For example, Description, Entity, Impact, etc. Define the behavior and threshold for the alert

Hi, I'd like to set configuration authentication to Active Directory. Do you know "Service Account User" 's  authority ? Should the user  belong to "Domain Admins"?   I don’t know “special user account”, what’s means? https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v55:wc-security-authentication-wc-t.html#task_84b_24f_85   Thank you for your care.  

If your Nutanix infrastructure resides in an environment that includes an HTTP proxy, you’ll need to understand the HTTP proxy and proxy whitelist configurations in Prism. This is especially important if your cluster is registered to Prism Central. If the proxy setting and proxy whitelist are configured incorrectly, communication between PE and PC could be unreliable or entirely unusable. A note of clarification: in this post we discuss network communication inside and outside an environment. To prevent any confusion, the “environment” refers to the internal network, either physical local LAN, VLAN, or VPN, which is separated from other systems and the internet by a firewall and proxy. Anything within the environment is “local” and anything past the firewall is “external”. So, why does this matter? If your environment has an HTTP proxy there is probably also a firewall rule blocking any HTTP(S) traffic that is not going through the proxy. Without proxy configura

Did you know that you can modify alerts in Prism Central? For example, you can modify an alert rather than using the defaults provided by Nutanix, say, change the threshold for data disk space usage or have some alerts marked as auto resolved, etc.   Here is an overview of the steps involved:   Open the alert policy page. Search for the alert that you wish to modify and click on the pencil icon to edit. Change the global settings for the alert as per your requirement. You can also choose a cluster that you want to exc

Dear SME’s, How do i migrate my Nutanix AHV cluster to a different domain? Here is the core future’s i am having now, it should be migrated. Prism Element  Acropolis File Server (We have enabled AFS replica between Primary and Secondar site) Async Protection Domain from Primary to Secondary ( For VM’s and AFS) Can you please someone help me to provide the best practice of doing these changes without or less production outage? Advance thanks. Thanks Thiruppathiraj  

So before we go ahead and take a look at the steps, let’s have a short introduction about prism central. Prism central can be used to monitor and manage clusters registered to it through a single web console. This is a centralized multi-cluster management tool that runs as a single VM or a cluster of VMs (scaled out Prism Central deployment). It provides features like single sign-on for multiple clusters, customizable dashboards, activity manager, etc.   If you do not have a prism central instance deployed, take a look at deployment instructions: https://support-portal.nutanix.com/page/document

What are the advantages to having UEFI set on a VM?  UEFI firmware is a successor to legacy BIOS firmware that supports larger hard drives, faster boot time and provides more security features.  Creation and starting VMs with UEFI firmware provide the following advantages. Boot faster Avoid legacy option ROM address constraints Include robust reliability and fault management Use UEFI drivers

Out of the box, Prism Element (PE) and Prism Central (PC) deploy with one local user configured, called ‘admin’. For initial setup this is useful but for the sake of security and auditing, it is strongly recommended to configure and use other accounts. For reference, User Management is covered in the Nutanix Security Guide. One option is to create individual local accounts in Prism. This is done from Settings – Local User Management. Whether on PE or PC (up to the current latest major release AOS 5.16), the role options for local users are: User Admin - allows the user to view information, perform any administrative task, and create or modify user accounts. Cluster Admin - allows the user to view information and perform any administrative task, but does not allow contr

What is Calm? Calm (Cloud Application LifeCycle Management) is a DevOps Automation Platform that models applications and integrates your teams, governance, and life cycle operations to manage your applications, calm includes: Single pane of glass for all of your applications, making infrastructure invisible Visual Infrastructure, Operations, and Governance as code Works with public + private cloud, and containers nuCalm = nutanix Calm, our new platform in PC Calm has some prerequisites such as a minimum AOS version supported and ports that must be open for the feature to work. See the full prerequisite here. Note: Nutanix Calm is not supported on Hyper-V clusters.

Managing infrastructure is a tough and complex task, especially when dealing with cluster-wide upgrades. Nutanix provides features such as Life Cycle Manager that can turn firmware and hypervisor upgrades into a 1-click process, making them slightly less complex.  Life Cycle Manager pulls the latest upgrade packages from the official pre-configured URL while performing inventory and then proceeds with the upgrade.    What if the cluster is isolated from the Web?   There is an option to set up a local webserver with the LCM offline bundle packages and use the server to perform inventory and complete the upgrade. 

Is there any way to test API with basic authentication on the Test Drive? As I can't download the Prism Central Bits, so testing APIs just using instance ID that has been provided in demo is not enough. Please tell if there is some way to download Prism bits and test. or any other way.

The backbone of a hyper-converged infrastructure is good network connectivity in the solution. Troubleshooting networking issues can be daunting. To help you with the process we put together an article describing the most common failure scenarios together with remediation steps as well as general troubleshooting techniques and sequence. The article also answers some of the most common questions: What are the possible causes of NIC errors? How do I determine if a Nutanix node is experiencing NIC errors? Should I be concerned that my NIC port shows any NIC errors? How does the packet error handling between cut-through and traditional store-and-forward switches differ? Where to look for errors? How does an error manifest itself? Normally if there is a fault with a cable, an SFP module, a switch port or the NIC hardware we notice some errors in the packets received or transmitted can be observed in the int

Nutanix gives you a feature to send alert emails periodically to ease administrator work and keep you always updated about your cluster health. Alert emails are used to warn users of errors in their Nutanix system.   Q. How to configure alert emails?    The following Prism Web Console guide lists the steps to configure alert emails  Prism Web Console Guide 5.16   Q. What will happen if the alert emails are not set up correctly?