Hi , I am facing issue with foundation VM based process.Installation failed after phoenix got installed with fataling errorAs well as throwing error as foundation failed configuring IPMI ip's [i did manually configured iDrac IP's before starting foundation ][img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/2127i3D11472F80496F3D.jpg[/img]
Hi, I upgraded BMC Firmware from 03.24 to -> 03.40 via IPMI UI today since that i can check the version of BMC on IPMI UI page that its 03.40 upgraded among 3nodes which i upgraded but its not the same on PRISM even its accomplished. i can only see that BMC Firmware 03.40 isnt upgraded on PRISM among 3nodes i use AOS 126.96.36.199 with AHV Nutanix 20160601.44 [img]https://d1qy7qyune0vt1.cloudfront.net/nutanix-us/attachment/2107iA6B3D2779D7382C9.png[/img] additionally, i have this fail message via conducting ncc health check funtion All 4nodes have intel CPU in them. The messages showing like this Detailed information for bmc_bios_version_check:Node 192.168.x.204FAIL: No Intel CPU is found on the node.Node 192.168.x.205FAIL: No Intel CPU is found on the node.Node 192.168.x.206FAIL: No Intel CPU is found on the node.Node 192.168.x.207FAIL: No Intel CPU is found on the node.Refer to KB 3565 ([url=http://portal.nutanix.com/kb/3565]http://portal.nutanix.com/kb/3565[/url]) for de
Dear Expert, My Nutanix environment as per below: 4block of Nutanix ( 8 Node ) connect to Nexus Access Switch with 10G SPF cable. Hypervisor: VMware 5.5 Issue: from vCenter we detect the host keep disconnected randomly. and vCenter become HANG Workaround: Ping continuously on Host. Result No packet drop can you please advise what need to do Regards, Hamballi
We are using Apache Cloudstack 4.8.0 with Vmware 5.5 to to provide IAAS services . We want to use Nutanix as underlying infrastructure Is this implementation supported ? Is there any recommendations, best practices for deployment or a reference architecture? We also plan to have HA for a class of our vm whereas others should not be replicated. What kind of mapping between Cloudstack and Vmware organisation units, and Nutnaix Protections domains strategies should we have to achieve this goal. If none of the above is supported is Apache Cloudstack in Nutanix roadmap on Vmware or AHV ? Thank you in advance
Hi last week we installed the first Nutanix cluster in Venezuela with 3 nodes, it was founded and as a best practice, the vSwitch br0 was "splited"into two vswitches by creating the br1 then the 10 GBE interfaces (eth2 and eth3) were assigned to the br0 and the 1 GBE interfaces (eth0 and eth1) were assigned to the br1, the administrator of the cluster decided to switch that assignment, i.e. to assign the 1 GBE interfaces to the br0 and the 10 GBE interfaces to the br1 by executing on the CVM's command line the command. [b][i]allssh manage_ovs --bridge_name br0 --bond_name bond0 --interface 1g update_uplinks[/i][/b] after the third node response to the command, the connection to the ssh sesion to the CVM was lost and now can't access the CVMs to revert the command neither ssh connection nor PRISM. In the nodes the 1 GBE interfaces leds are orange and red, only have access to the console by connecting a monitor and a keyboard to the physical nodes, my question is, does exist a way t
Right now we about to push ESXi 5.5 u3b so we can move on up to AOS 188.8.131.52. Since Nutanix doesn't support pushing out patches, we planned to do that with VUM which is fine. At least saving time from having to bring down each node manually for upgrading to u3b. On top of patching, we're also installing NFS VAAI VIB. In our lab, we do it via command line, but has anyone found a zip, or package that VUM can support pushing out that way we can just package our baseline with updates and the VIB file? We can't find anywhere that has a zip file or anything we can leverage thus far. Since we have two data centers a good number of nodes in the cluster at each, We'd love to save time if at all possible, so any advice is greatly appreciated. Thanks!
Hi, which 10G SFP+ LR (single mode) modules are supported in Nutanix NX-8035-G5 and NX-6035C-G5 nodes with C-NIC-10G-2-SI 10G network interface cards? Do the SFP+ need special branding, as e.g. for use with Cisco switches? Thanks, Erik
Hello All, I am new to "Nutanix XCP, One basic question regarding the Raw device mapping in Esxi using the Nutanix infrastructure. Is RDM mapping supported in the Nutanix Appliance4.6 (Nos)? If yes, Can you please share the procedure to Create a RDM (Physical mode)?.. Thanks, Bhoopathy
Hi, I am new to Nutanix so would appreciate a bit of advice on importing a cluster into System Center Virtual Machine Manager. I have an existing Nutanix Hyper-V cluster which I want to manage via SCVMM. Has anyone got any advice in importing this into SCVMM and anything I should be aware of? Also, has anyone converted Standard switches to logical switches once the cluster has been imported or is that not a good idea? Thanks!
I have this same error on 3 nodes - I have checked networking / Time and connectivity and it all seems ok. Running ncc health checks on different services gives me a range of things to check. Not sure where to start with this. The Hosts are Hyper-V.
Based on this youtube video (39:34), there is Prism Self Service Portal Available. Nutanix .NEXT 2016 Opening Keynote Featuring Product Innovations and Demos -> [url=https://www.youtube.com/watch?v=YDVXugqcbbg]https://www.youtube.com/watch?v=YDVXugqcbbg[/url] Is this already in the current release for Prism Central, if not when would this be available? Thanks!
I need to change the IPMI IP Address on 2 Nodes of a 4 Node Dell XC Block. I know how to change the IP from the iDRAC Console; however, how do I get it to update the Nutanix Node? I read through the Admin Manual; however, I could not find anything related to changing the IPMI IP Address. Thanks,David
Hi, When running NCC on one of the customers cluster, the following output is generated... FAIL: Remote site: HQ-NTNXNumber of vstores mapped for the local site on the remote site are not same.Refer to KB 3335 ([url=http://portal.nutanix.com/kb/3335]http://portal.nutanix.com/kb/3335[/url]) for details on remote_site_config_check or Recheck with: ncc health_checks data_protection_checks remote_site_checks remote_site_config_check Why is it so important to have the same number of mappings? When we are replication from site A to site B, we can use different mappings than when replication is executed from site B to site A. Regards, Bart
Hi all, I created a document describing how to upgrade ESXi on the XC platform for a customer. It uses the Dell iDRAC specifically. If anyone has feedback on anything that was missed or could make things easier I'd appreciate it. [list][list=1] [*]Move VMs and place host into maintenance mode[list=1] [*]From vCenter Web Client navigate to Hosts and Clusters [*]Select the host to be upgraded [*]Click Related Objects and Virtual Machines [*]Select all running VMs [b]except CVM[/b] and migrate to another host [*]Once all VMs have been migrated right click the host, select Maintenance Mode and Enter Maintenance Mode [*]SSH to the Nutanix CVM on the host [*]Run the following at the prompt: cvm_shutdown -P now[/list]Login to iDRAC of the ESXi server[list=1] [*]Default user: root [*]Default pass: calvin[/list]Click Launch in the Virtual Console Preview section [*]Click Run twice and accept any errors on the Java applet [*]Click on Virtual Media then Connect Virtual Media [*]Click Virtu
Hello Nutanix Currently, my demo cluster has had problem in removing host from cluster The host that I wanted to remove has an SSD showing status: "Marked for removal but not detachable" and it has been kept by that status for a long time with nothing changed despite that the host was shown up as successfully removed the host So, after that I have tried reinstalling this host but that status still showing up and I cannot do anything with the new reinstalled host as well as expanding the cluster with it By the way, I noted that before reinstalling this host, this host was running as a cluster member
Hi all, we're on AOS 4.7.2 with vmware 6.0 upd 2 I was thinking to add a secondary vmknic management interface on all esxi hosts (to be used for backups) doing that just on vmware config without touching anything in cluster config? Thanks a.
Hai Nutanix Team I have a question regarding to customer needs, what sould I suggest to customer if they want to plan migrate their Database existing to Nutanix Acropolis? and If existing physical email server has 2 or more NIC, 1st WAN 2nd LAN, then we migrate to acropolis, so we add another NIC to VM, so what we configure for mapping NIC's WAN or LAN is at Switch Tor or VSwitch at Acropolis ? Regards, Caplin
Login to the community
Login with your account
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.