I have recently upgraded my vCenter from 6.0 -> 6.5u1, and I'm not looking to upgrade my ESXi 6.0u3 installs to 6.5u1. My first attempt was to use one-click hypervisor upgrade, and I was able to uploading the ISO and MD5 checksum, but the pre-upgrade check errors out pretty quickly with a fairly generic error message saying "unable to determine version of bundle." Did a few re-download and re-upload attempts to verify my file integrity but the error persisted. I then tried to do the upgrade old-school style using VUM which is conveniently baked into my VCSA as of 6.5, and I got another generic error message inside of update manager, "The upgrade contains the following set of conflicting VIBs:" with nothing but blank space following the colon. Typically I would have expected to see an individual VIB called out in list form, but there is just nothing there. I am fully patched to current using Nutanix LCM, so I suspect it is probably one of the LSI HBA updates that LCM has slipped in - has anybody else run across a similar problem? Did some searching around the VMware community forums and I haven't seen any "blank" incompatible VIB errors so I have a gut feeling that it is a symptom/something related to specific Nutanix LCM updates that we have performed.
Page 1 / 1
I ran into a couple of VIB incompatibilities when I ran VMware Update Manager to upgrade to 6.5u1. I have a Windows based vCenter 6.5server, but on my Update Manager it told me the VIBs that had problems.
When I attached the baseline with the 6.5u1 ISO and ran a Scan, Update Manager says the Compliance is Incompatable and under Status details I get something similar to this:
The upgrade contains the following set of conflicting VIBs:
Emulex_bootbank_scsi-lpfc820_8.2.4.141.55-1OEM.500.0.0.472560
Emulex_bootbank_scsi-lpfc820_8.2.4.141.55-1OEM.500.0.0.472560
Mellanox_bootbank_net-mst_2.0.0.0-1OEM.550.0.0.472560
Mellanox_bootbank_net-mst_2.0.0.0-1OEM.550.0.0.472560
(Note: This is from an old HP server, just ran a scan for an example)
To solve my problem I hit google and VMWare, found updated drivers on VMWares site, uploaded them into Update Manager Patch Repository and applied them from there using the Remediate button. From here I was able to run the ESX 6.5u1 Host Upgrade from Update Manager.
If you cannot get the conflicting VIBs out of Update Manager, I would suggest mounting the 6.5u1 ISO in the Nutanix node’s IPMI interface, and try to run the upgrade. It will fail, but it should spit out a reason at least and the names of the VIBs stopping it from succeeding.
When I attached the baseline with the 6.5u1 ISO and ran a Scan, Update Manager says the Compliance is Incompatable and under Status details I get something similar to this:
The upgrade contains the following set of conflicting VIBs:
Emulex_bootbank_scsi-lpfc820_8.2.4.141.55-1OEM.500.0.0.472560
Emulex_bootbank_scsi-lpfc820_8.2.4.141.55-1OEM.500.0.0.472560
Mellanox_bootbank_net-mst_2.0.0.0-1OEM.550.0.0.472560
Mellanox_bootbank_net-mst_2.0.0.0-1OEM.550.0.0.472560
(Note: This is from an old HP server, just ran a scan for an example)
To solve my problem I hit google and VMWare, found updated drivers on VMWares site, uploaded them into Update Manager Patch Repository and applied them from there using the Remediate button. From here I was able to run the ESX 6.5u1 Host Upgrade from Update Manager.
If you cannot get the conflicting VIBs out of Update Manager, I would suggest mounting the 6.5u1 ISO in the Nutanix node’s IPMI interface, and try to run the upgrade. It will fail, but it should spit out a reason at least and the names of the VIBs stopping it from succeeding.
dbolognani1, would you please point me to the drivers you downloaded to get this going? I have the same error and I can't find them. Thank you in advance!
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.