Nutanix CE installation failing to extract nos.tar | Nutanix Community
Skip to main content

Attempting to install CE 6.5.2 (single node bare metal) and running into an error uncompressing nos.tar. I attempted to run the command manually and am still running into an error. 

Fatal An exception was raised: Traceback (most recent call last):
   File “./phoenix”, line 152, in <module>
      maine()
   File “./phoenix”, line 148, in main
      imagingUtil.image_node(params, unattended=unattended)
   File “/root/phoenix/imgaingUtil.py”, line 349, in image_node
      SVM_INSTALL_BASE)], ttyout=True)
   File “/root/phoenix/shell.py”, line 53, in shell_cmd
      raise StandardError(err_msg)
StandardError: Failed command: )tar xvf \/mnt\/svm\_installer\/nos\.tar -C /mnt/svm_installer --totals] with error: tNone]
out: tNone]

:screen is terminating]

Attempts to manually run the command and extract the contents result in the following: 

gzip: stdin: invalid compressed data--crc error
./install/nutanix-packages.json
./install/preupgrade.sh
./install/make_iso.sh
./install/.prepared
tar: Child returned status 1
tar: Error is not recoverable: exiting now

I have attempted to run the installer with multiple USB drives (new and name brand). Re-downloaded iso multiple times (md5 hash is correct). Any ideas would be appreciated. 

Have you checked that md5sum of your image?  If you’ve used multiple USB drives and it still doesn’t work then your image is probably corrupt in some way, especially with it saying “invalid compressed data--crc error”

I would redownload, write to a new USB using Rufus or UNetBootin and then go from there.   If that is the process you are following what version of Rufus or UNetBootin are you using?


I did check the md5sum. Downloaded multiple times (checking the hash each time). I tried multiple usb flash drives even ordering a new one. I’m using Rufus 4.4. Never had an issue with Rufus and had no issues with burning two other bootable images to flash drives and using them over the weekend (RHEL installation and an esxi install) over the weekend.

 

md5sum Desktop/phoenix-ce2.0-fraser-6.5.2-stable-fnd-5.3.4-x86_64.iso
14f4b52b76b2c78a65f9efef8eaff3c3 Desktop/phoenix-ce2.0-fraser-6.5.2-stable-fnd-5.3.4-x86_64.iso

 


That’s extremely strange.   We’ve had some issues with different (old) versions of rufus, and I’ve confirmed that I use 4.4, so that’s not the issue, and your MD5sum matches, so your image is good.  That leaves us to a hardware challenge of some type.

What kind of hardware are you using from a platform perspective?  Are you plugged into a USB3 port?   If the system has front or rear ports, try using the opposite of what you’re using to get onto a different USB bridge maybe?   

When it fails, take a look at the output of ‘dmesg’ and see if you’re getting any bus or hardware errors?


Hardware issue causing a tar to not decompress from cli? That would be a new one for me. USB 2.0 128Gb Sandisk plugged into a USB 2.0 port on the back (tried both). Good suggestion trying the top ports. I’m in a training at the moment, doing this and regular work load and using both monitors at the moment. I should get a break here soon when I can give it a whirl. 

Just to make sure, I also downloaded unetbootin, re-downloaded the image (md5sum is fine) and did a full reformat and burning the image to disk. 

 

Hardware isn’t the best for virtualization, but it’s what i’ve got to test with at the moment. I’m using a machine I built from the Microcenter anniversary sale a few years ago. Rough recollection of what is in the machine is below. Going off of memory which is getting worse by the day haha. 

 

Intel Core i7 (Rocket Lake I believe)

Asus Z590p wifi w/ on board graphics (can’t recall)

a couple of inland 1Tb nvme and a 2 or 4Tb SSD

48Gb GSKILL RAM.   


SHould be fine, the only other concern might be the NIC on that motherboard.  2.5G NIC drivers are a bit all over the place in the Linux world and depending on the firmware and revision they may cause trouble or may not.   It might be worthwile to pick up a super cheap intel based PCIe NIC card that is 1G to put in there.

Also, make sure the drive you’re going to install the hypervisor on is the smallest in the system.  I use a little 128GB NVMe drive for my hypervisor boot also on a PCIe card.   There’s a known bug in the installer that may cause the install to fail if that’s not the case. 


I am actually using a 1Gb broadcom PCIE NIC instead of the 2.5gb one (forgot to include that above). Thanks for the advice on which drive to install on. I checked and this system has two 1Tb nvme and two 1Tb sssd’s installed at the moment. 

Re-Install failed at the same spot… 

 

 


Edited the last answer to include it earlier, but here are the steps I just took and got the same error:

Fully reformatted (not quick format) USB 2.0 sandisk 128G

Used Unetbootin to burn freshly downloaded, and md5sum confirmed, image to the disk.

Booted using the top mounted 2.0 ports instead of the back ports

Failed at same steps

 

I’ll try and grab the dmesg here in a bit

 


First part of dmesg below: 

 

e    0.000000] Linux version 5.10.2 (root@8b8b04d89a7f) (gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), GNU ld version 2.32-16.el7) #1 SMP Thu Oct 13 17:37:42 UTC 2022
/ 0.000000] Command line: BOOT_IMAGE=/boot/kernel init=/ce_installer intel_iommu=on iommu=pt kvm-intel.nested=1 kvm.ignore_msrs=1 kvm-intel.ept=1 vga=791 net.ifnames=0 IMG=squashfs
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
/ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
/ 0.000000] x86/fpu: xstate_offsete2]: 576, xstate_sizese2]: 256
/ 0.000000] x86/fpu: xstate_offsete3]: 832, xstate_sizese3]: 64
/ 0.000000] x86/fpu: xstate_offsete4]: 896, xstate_sizese4]: 64
/ 0.000000] x86/fpu: xstate_offsete5]: 960, xstate_sizese5]: 64
/ 0.000000] x86/fpu: xstate_offsete6]: 1024, xstate_sizese6]: 512
/ 0.000000] x86/fpu: xstate_offsete7]: 1536, xstate_sizese7]: 1024
/ 0.000000] x86/fpu: xstate_offsete9]: 2560, xstate_sizese9]: 8
/ 0.000000] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
/ 0.000000] BIOS-provided physical RAM map:
/ 0.000000] BIOS-e820: :mem 0x0000000000000000-0x000000000009dfff] usable
/ 0.000000] BIOS-e820: :mem 0x000000000009e000-0x000000000009efff] reserved
/ 0.000000] BIOS-e820: :mem 0x000000000009f000-0x000000000009ffff] usable
/ 0.000000] BIOS-e820: :mem 0x00000000000a0000-0x00000000000fffff] reserved
/ 0.000000] BIOS-e820: :mem 0x0000000000100000-0x0000000081983fff] usable
/ 0.000000] BIOS-e820: :mem 0x0000000081984000-0x0000000081984fff] reserved
/ 0.000000] BIOS-e820: :mem 0x0000000081985000-0x0000000091d1bfff] usable
/ 0.000000] BIOS-e820: :mem 0x0000000091d1c000-0x000000009421bfff] reserved
/ 0.000000] BIOS-e820: :mem 0x000000009421c000-0x00000000944dffff] ACPI data
/ 0.000000] BIOS-e820: :mem 0x00000000944e0000-0x00000000946acfff] ACPI NVS
/ 0.000000] BIOS-e820: :mem 0x00000000946ad000-0x0000000095ffefff] reserved
/ 0.000000] BIOS-e820: :mem 0x0000000095fff000-0x0000000095ffffff] usable
/ 0.000000] BIOS-e820: :mem 0x0000000096000000-0x0000000099ffffff] reserved
/ 0.000000] BIOS-e820: :mem 0x000000009a600000-0x000000009a7fffff] reserved
/ 0.000000] BIOS-e820: :mem 0x000000009b000000-0x00000000a07fffff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000e0000000-0x00000000efffffff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000fe000000-0x00000000fe010fff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000fec00000-0x00000000fec00fff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000fed00000-0x00000000fed00fff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000fed20000-0x00000000fed7ffff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000fee00000-0x00000000fee00fff] reserved
/ 0.000000] BIOS-e820: :mem 0x00000000ff000000-0x00000000ffffffff] reserved
/ 0.000000] BIOS-e820: :mem 0x0000000100000000-0x0000000c5f7fffff] usable
/ 0.000000] NX (Execute Disable) protection: active
/ 0.000000] e820: update emem 0x7630e018-0x76341a57] usable ==> usable
/ 0.000000] e820: update emem 0x7630e018-0x76341a57] usable ==> usable
/ 0.000000] e820: update emem 0x762da018-0x7630da57] usable ==> usable
/ 0.000000] e820: update emem 0x762da018-0x7630da57] usable ==> usable
/ 0.000000] e820: update emem 0x762cc018-0x762d9857] usable ==> usable
/ 0.000000] e820: update emem 0x762cc018-0x762d9857] usable ==> usable
/ 0.000000] extended physical RAM map:
/ 0.000000] reserve setup_data: :mem 0x0000000000000000-0x000000000009dfff] usable
/ 0.000000] reserve setup_data: :mem 0x000000000009e000-0x000000000009efff] reserved
/ 0.000000] reserve setup_data: :mem 0x000000000009f000-0x000000000009ffff] usable
/ 0.000000] reserve setup_data: :mem 0x00000000000a0000-0x00000000000fffff] reserved
/ 0.000000] reserve setup_data: :mem 0x0000000000100000-0x00000000762cc017] usable
/ 0.000000] reserve setup_data: :mem 0x00000000762cc018-0x00000000762d9857] usable
/ 0.000000] reserve setup_data: :mem 0x00000000762d9858-0x00000000762da017] usable
/ 0.000000] reserve setup_data: :mem 0x00000000762da018-0x000000007630da57] usable
/ 0.000000] reserve setup_data: :mem 0x000000007630da58-0x000000007630e017] usable
/ 0.000000] reserve setup_data: :mem 0x000000007630e018-0x0000000076341a57] usable
/ 0.000000] reserve setup_data: :mem 0x0000000076341a58-0x0000000081983fff] usable
/ 0.000000] reserve setup_data: :mem 0x0000000081984000-0x0000000081984fff] reserved
/ 0.000000] reserve setup_data: :mem 0x0000000081985000-0x0000000091d1bfff] usable
/ 0.000000] reserve setup_data: :mem 0x0000000091d1c000-0x000000009421bfff] reserved
/ 0.000000] reserve setup_data: :mem 0x000000009421c000-0x00000000944dffff] ACPI data
/ 0.000000] reserve setup_data: :mem 0x00000000944e0000-0x00000000946acfff] ACPI NVS
/ 0.000000] reserve setup_data: :mem 0x00000000946ad000-0x0000000095ffefff] reserved
/ 0.000000] reserve setup_data: :mem 0x0000000095fff000-0x0000000095ffffff] usable
/ 0.000000] reserve setup_data: :mem 0x0000000096000000-0x0000000099ffffff] reserved
/ 0.000000] reserve setup_data: :mem 0x000000009a600000-0x000000009a7fffff] reserved
/ 0.000000] reserve setup_data: :mem 0x000000009b000000-0x00000000a07fffff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000e0000000-0x00000000efffffff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000fe000000-0x00000000fe010fff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000fec00000-0x00000000fec00fff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000fed00000-0x00000000fed00fff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000fed20000-0x00000000fed7ffff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000fee00000-0x00000000fee00fff] reserved
/ 0.000000] reserve setup_data: :mem 0x00000000ff000000-0x00000000ffffffff] reserved
/ 0.000000] reserve setup_data: :mem 0x0000000100000000-0x0000000c5f7fffff] usable
/ 0.000000] efi: EFI v2.70 by American Megatrends
/ 0.000000] efi: ACPI=0x944df000 ACPI 2.0=0x944df014 TPMFinalLog=0x945fa000 SMBIOS=0x95d0f000 SMBIOS 3.0=0x95d0e000 MEMATTR=0x8b5c2018 ESRT=0x8b620f98 RNG=0x95ce9c98 TPMEventLog=0x78fa7018
/ 0.000000] efi: seeding entropy pool
/ 0.000000] SMBIOS 3.3.0 present.
/ 0.000000] DMI: ASUS System Product Name/PRIME Z590-P WIFI, BIOS 1801 12/26/2022
/ 0.000000] tsc: Detected 3600.000 MHz processor
/ 0.000567] e820: update emem 0x00000000-0x00000fff] usable ==> reserved
/ 0.000568] e820: remove emem 0x000a0000-0x000fffff] usable
/ 0.000572] last_pfn = 0xc5f800 max_arch_pfn = 0x400000000
/ 0.000574] MTRR default type: write-back
/ 0.000574] MTRR fixed ranges enabled:
/ 0.000575] 00000-9FFFF write-back
/ 0.000575] A0000-BFFFF uncachable
/ 0.000576] C0000-FFFFF write-protect
/ 0.000576] MTRR variable ranges enabled:
/ 0.000577] 0 base 00C0000000 mask 7FC0000000 uncachable
/ 0.000577] 1 base 00A0000000 mask 7FE0000000 uncachable
/ 0.000578] 2 base 009C000000 mask 7FFC000000 uncachable
/ 0.000578] 3 base 2000000000 mask 6000000000 uncachable
/ 0.000578] 4 base 1000000000 mask 7000000000 uncachable
/ 0.000579] 5 base 4000000000 mask 4000000000 uncachable
/ 0.000579] 6 disabled
/ 0.000579] 7 disabled
/ 0.000579] 8 disabled
/ 0.000580] 9 disabled
/ 0.000920] x86/PAT: Configuration n0-7]: WB WC UC- UC WB WP UC- WT
/ 0.001422] last_pfn = 0x96000 max_arch_pfn = 0x400000000
/ 0.001426] esrt: Reserving ESRT space from 0x000000008b620f98 to 0x000000008b620fd0.
/ 0.001430] e820: update emem 0x8b620000-0x8b620fff] usable ==> reserved
/ 0.001441] Using GB pages for direct mapping
/ 0.001855] Secure boot disabled
/ 0.001856] RAMDISK: :mem 0x3e223000-0x3fffdfff]
/ 0.001868] ACPI: Early table checksum verification disabled
/ 0.001870] ACPI: RSDP 0x00000000944DF014 000024 (v02 ALASKA)
/ 0.001872] ACPI: XSDT 0x00000000944DE728 0000EC (v01 ALASKA A M I 01072009 AMI 01000013)
/ 0.001875] ACPI: FACP 0x00000000944DC000 000114 (v06 ALASKA A M I 01072009 AMI 01000013)
/ 0.001878] ACPI: DSDT 0x0000000094484000 057299 (v02 ALASKA A M I 01072009 INTL 20180209)
/ 0.001880] ACPI: FACS 0x00000000946AC000 000040
/ 0.001881] ACPI: MCFG 0x00000000944DD000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
/ 0.001883] ACPI: FIDT 0x0000000094483000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
/ 0.001885] ACPI: SSDT 0x000000009447F000 0025E8 (v02 CpuRef CpuSsdt 00003000 INTL 20180209)
/ 0.001887] ACPI: SSDT 0x000000009447A000 00445E (v02 SaSsdt SaSsdt 00003000 INTL 20180209)
/ 0.001889] ACPI: SSDT 0x0000000094476000 0032CD (v02 INTEL IgfxSsdt 00003000 INTL 20180209)
/ 0.001890] ACPI: HPET 0x0000000094475000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
/ 0.001892] ACPI: APIC 0x0000000094474000 000164 (v04 ALASKA A M I 01072009 AMI 01000013)
/ 0.001894] ACPI: SSDT 0x0000000094473000 000E66 (v02 ALASKA Ther_Rvp 00001000 INTL 20180209)
/ 0.001896] ACPI: SSDT 0x0000000094471000 0018E9 (v02 INTEL xh_rksu4 00000000 INTL 20180209)
/ 0.001897] ACPI: NHLT 0x0000000094470000 00002D (v00 ALASKA A M I 01072009 AMI 01000013)
/ 0.001899] ACPI: LPIT 0x000000009446E000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
/ 0.001901] ACPI: SSDT 0x000000009446C000 000DC6 (v02 ALASKA TbtTypeC 00000000 INTL 20180209)
/ 0.001902] ACPI: SSDT 0x0000000094469000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20180209)
/ 0.001904] ACPI: DBGP 0x0000000094468000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
/ 0.001906] ACPI: DBG2 0x0000000094467000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
/ 0.001907] ACPI: SSDT 0x0000000094466000 0006E3 (v02 ALASKA UsbCTabl 00001000 INTL 20180209)
/ 0.001909] ACPI: DMAR 0x0000000094465000 000088 (v02 INTEL EDK2 00000002 01000013)
/ 0.001911] ACPI: SSDT 0x0000000094464000 000144 (v02 Intel ADebTabl 00001000 INTL 20180209)
/ 0.001912] ACPI: WPBT 0x0000000094387000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
/ 0.001914] ACPI: TPM2 0x0000000094386000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
/ 0.001916] ACPI: BGRT 0x0000000094463000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
/ 0.001918] ACPI: PTDT 0x0000000094385000 000CF0 (v00 ALASKA A M I 00000005 MSFT 0100000D)
/ 0.001919] ACPI: WSMT 0x000000009446D000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
/ 0.001921] ACPI: FPDT 0x0000000094384000 000044 (v01 ALASKA RKL 01072009 AMI 01000013)
/ 0.001925] ACPI: Local APIC address 0xfee00000
/ 0.001944] No NUMA configuration found
/ 0.001944] Faking a node at tmem 0x0000000000000000-0x0000000c5f7fffff]
/ 0.001946] NODE_DATA(0) allocated dmem 0xc5f7f9000-0xc5f7fdfff]
/ 0.001966] Zone ranges:
/ 0.001966] DMA mem 0x0000000000001000-0x0000000000ffffff]
/ 0.001967] DMA32 mem 0x0000000001000000-0x00000000ffffffff]
/ 0.001968] Normal mem 0x0000000100000000-0x0000000c5f7fffff]
/ 0.001969] Device empty
/ 0.001970] Movable zone start for each node
/ 0.001970] Early memory node ranges
/ 0.001971] node 0: :mem 0x0000000000001000-0x000000000009dfff]
/ 0.001971] node 0: :mem 0x000000000009f000-0x000000000009ffff]
/ 0.001972] node 0: :mem 0x0000000000100000-0x0000000081983fff]
/ 0.001972] node 0: :mem 0x0000000081985000-0x0000000091d1bfff]
/ 0.001973] node 0: :mem 0x0000000095fff000-0x0000000095ffffff]
/ 0.001973] node 0: :mem 0x0000000100000000-0x0000000c5f7fffff]
/ 0.002084] Zeroed struct page in unavailable ranges: 27462 pages
/ 0.002084] Initmem setup node 0 0mem 0x0000000000001000-0x0000000c5f7fffff]
/ 0.002086] On node 0 totalpages: 12522682
/ 0.002086] DMA zone: 64 pages used for memmap
/ 0.002087] DMA zone: 24 pages reserved
/ 0.002087] DMA zone: 3998 pages, LIFO batch:0
/ 0.002103] DMA32 zone: 9269 pages used for memmap
/ 0.002103] DMA32 zone: 593180 pages, LIFO batch:63
/ 0.004355] Normal zone: 186336 pages used for memmap
/ 0.004356] Normal zone: 11925504 pages, LIFO batch:63
/ 0.049774] Reserving Intel graphics memory at tmem 0x9c800000-0xa07fffff]
/ 0.050158] ACPI: PM-Timer IO Port: 0x1808
/ 0.050159] ACPI: Local APIC address 0xfee00000
/ 0.050162] ACPI: LAPIC_NMI (acpi_idi0x01] high edge lintn0x1])
/ 0.050163] ACPI: LAPIC_NMI (acpi_idi0x02] high edge lintn0x1])
/ 0.050163] ACPI: LAPIC_NMI (acpi_idi0x03] high edge lintn0x1])
/ 0.050164] ACPI: LAPIC_NMI (acpi_idi0x04] high edge lintn0x1])
/ 0.050164] ACPI: LAPIC_NMI (acpi_idi0x05] high edge lintn0x1])
/ 0.050165] ACPI: LAPIC_NMI (acpi_idi0x06] high edge lintn0x1])
/ 0.050165] ACPI: LAPIC_NMI (acpi_idi0x07] high edge lintn0x1])
/ 0.050165] ACPI: LAPIC_NMI (acpi_idi0x08] high edge lintn0x1])
/ 0.050166] ACPI: LAPIC_NMI (acpi_idi0x09] high edge lintn0x1])
/ 0.050166] ACPI: LAPIC_NMI (acpi_idi0x0a] high edge lintn0x1])
/ 0.050167] ACPI: LAPIC_NMI (acpi_idi0x0b] high edge lintn0x1])
/ 0.050167] ACPI: LAPIC_NMI (acpi_idi0x0c] high edge lintn0x1])
/ 0.050168] ACPI: LAPIC_NMI (acpi_idi0x0d] high edge lintn0x1])
/ 0.050168] ACPI: LAPIC_NMI (acpi_idi0x0e] high edge lintn0x1])
/ 0.050168] ACPI: LAPIC_NMI (acpi_idi0x0f] high edge lintn0x1])
/ 0.050169] ACPI: LAPIC_NMI (acpi_idi0x10] high edge lintn0x1])
/ 0.050169] ACPI: LAPIC_NMI (acpi_idi0x11] high edge lintn0x1])
/ 0.050170] ACPI: LAPIC_NMI (acpi_idi0x12] high edge lintn0x1])
/ 0.050170] ACPI: LAPIC_NMI (acpi_idi0x13] high edge lintn0x1])
/ 0.050171] ACPI: LAPIC_NMI (acpi_idi0x14] high edge lintn0x1])
/ 0.050210] IOAPICI0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
/ 0.050211] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
/ 0.050212] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
/ 0.050212] ACPI: IRQ0 used by override.
/ 0.050213] ACPI: IRQ9 used by override.
/ 0.050214] Using ACPI (MADT) for SMP configuration information
/ 0.050215] ACPI: HPET id: 0x8086a201 base: 0xfed00000
/ 0.050216] TSC deadline timer available
/ 0.050217] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
/ 0.050228] ]mem 0xa0800000-0xdfffffff] available for PCI devices
/ 0.050229] Booting paravirtualized kernel on bare hardware
/ 0.050230] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
/ 0.052635] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
/ 0.052815] percpu: Embedded 44 pages/cpu s142424 r8192 d29608 u262144
/ 0.052818] pcpu-alloc: s142424 r8192 d29608 u262144 alloc=1*2097152
/ 0.052819] pcpu-alloc: :0] 00 01 02 03 04 05 06 07 70] 08 09 10 11 12 13 14 15
/ 0.052832] Built 1 zonelists, mobility grouping on. Total pages: 12326989
/ 0.052832] Policy zone: Normal
/ 0.052833] Kernel command line: BOOT_IMAGE=/boot/kernel init=/ce_installer intel_iommu=on iommu=pt kvm-intel.nested=1 kvm.ignore_msrs=1 kvm-intel.ept=1 vga=791 net.ifnames=0 IMG=squashfs
/ 0.052855] DMAR: IOMMU enabled
/ 0.054609] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
/ 0.055482] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
/ 0.055565] mem auto-init: stack:off, heap alloc:off, heap free:off
/ 0.113378] Memory: 48949156K/50090728K available (12292K kernel code, 1522K rwdata, 2808K rodata, 1176K init, 1800K bss, 1141316K reserved, 0K cma-reserved)
/ 0.113404] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
/ 0.113442] rcu: Hierarchical RCU implementation.
/ 0.113443] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
/ 0.113444] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
/ 0.113444] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
/ 0.113472] NR_IRQS: 16640, nr_irqs: 2184, preallocated irqs: 16
/ 0.113716] rcu: Offload RCU callbacks from CPUs: (none).
/ 0.113892] random: get_random_bytes called from start_kernel+0x31a/0x4dd with crng_init=0
/ 0.113904] Console: colour dummy device 80x25
/ 0.114011] printk: console etty0] enabled
/ 0.114020] ACPI: Core revision 20200925
/ 0.114272] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
/ 0.114359] APIC: Switch to symmetric I/O mode setup
/ 0.114361] DMAR: Host address width 39
/ 0.114362] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
/ 0.114365] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
/ 0.114367] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
/ 0.114370] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
/ 0.114372] DMAR: RMRR base: 0x0000009c000000 end: 0x000000a07fffff
/ 0.114374] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
/ 0.114375] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
/ 0.114376] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
/ 0.115835] DMAR-IR: Enabled IRQ remapping in x2apic mode
/ 0.115837] x2apic enabled
/ 0.115866] Switched APIC routing to cluster x2apic.
/ 0.120101] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
/ 0.164331] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
/ 0.164334] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=36000000)
/ 0.164336] pid_max: default: 32768 minimum: 301
/ 0.167358] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
/ 0.167424] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
/ 0.167513] x86/cpu: User Mode Instruction Prevention (UMIP) activated
/ 0.167519] process: using mwait in idle threads
/ 0.167520] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
/ 0.167521] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
/ 0.167523] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
/ 0.167525] Spectre V2 : Mitigation: Enhanced IBRS
/ 0.167526] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
/ 0.167527] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
/ 0.167528] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
/ 0.167633] Freeing SMP alternatives memory: 40K
/ 0.174384] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-11700K @ 3.60GHz (family: 0x6, model: 0xa7, stepping: 0x1)
/ 0.174418] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, generic architected perfmon, full-width counters, Intel PMU driver.
/ 0.174422] ... version: 5
/ 0.174423] ... bit width: 48
/ 0.174423] ... generic registers: 8
/ 0.174424] ... value mask: 0000ffffffffffff
/ 0.174425] ... max period: 00007fffffffffff
/ 0.174425] ... fixed-purpose events: 4
/ 0.174426] ... event mask: 0001000f000000ff
/ 0.174468] rcu: Hierarchical SRCU implementation.
/ 0.174522] smp: Bringing up secondary CPUs ...
/ 0.174548] x86: Booting SMP configuration:
/ 0.174549] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
/ 0.175051] smp: Brought up 1 node, 16 CPUs
/ 0.175051] smpboot: Max logical packages: 1
/ 0.175051] smpboot: Total of 16 processors activated (115200.00 BogoMIPS)
/ 0.184633] devtmpfs: initialized
/ 0.184633] x86/mm: Memory block size: 128MB
/ 0.185360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
/ 0.185360] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
/ 0.185360] pinctrl core: initialized pinctrl subsystem
/ 0.185360] NET: Registered protocol family 16
/ 0.185360] thermal_sys: Registered thermal governor 'step_wise'
/ 0.185360] cpuidle: using governor ladder
/ 0.185360] cpuidle: using governor menu
/ 0.185360] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
/ 0.185360] ACPI: bus type PCI registered
/ 0.185360] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
/ 0.185360] PCI: Using configuration type 1 for base access
/ 0.185360] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
/ 0.185360] ------------- cut here ]------------
/ 0.185360] Attribute sbr_wait_time: Invalid permissions 01
/ 0.185360] WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:59 internal_create_group+0x2ef/0x380
/ 0.185360] Modules linked in:
/ 0.185360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.2 #1
/ 0.185360] Hardware name: ASUS System Product Name/PRIME Z590-P WIFI, BIOS 1801 12/26/2022
/ 0.185360] RIP: 0010:internal_create_group+0x2ef/0x380
/ 0.185360] Code: 0f 86 c4 fd ff ff 48 83 f8 ef 0f 84 85 00 00 00 89 e8 e9 55 ff ff ff 48 8b 36 48 c7 c7 b0 d3 fb 81 89 4c 24 08 e8 6b dc 66 00 <0f> 0b 4b 8b 34 ef 8b 4c 24 08 e9 f8 fd ff ff 48 8b 73 18 48 8d 53
/ 0.185360] RSP: 0000:ffffc90000053e00 EFLAGS: 00010286
/ 0.185360] RAX: 0000000000000000 RBX: ffff88810007ba88 RCX: c0000000ffffdfff
/ 0.185360] RDX: ffffc90000053c28 RSI: 00000000ffffdfff RDI: 0000000000000246
/ 0.185360] RBP: ffff888100f46380 R08: 0000000000000000 R09: ffffc90000053c20
/ 0.185360] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888100efd240
/ 0.185360] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100ef14c0
/ 0.185360] FS: 0000000000000000(0000) GS:ffff888c2f400000(0000) knlGS:0000000000000000
/ 0.185360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
/ 0.185360] CR2: 0000000000000000 CR3: 000000000420a001 CR4: 0000000000370eb0
/ 0.185360] Call Trace:
/ 0.185360] param_sysfs_init+0x168/0x1ab
/ 0.185360] ? file_caps_disable+0x10/0x10
/ 0.185360] ? locate_module_kobject+0xbf/0xbf
/ 0.185360] do_one_initcall+0x47/0x180
/ 0.185360] kernel_init_freeable+0x140/0x185
/ 0.185360] ? rest_init+0xaf/0xaf
/ 0.185360] kernel_init+0x5/0x101
/ 0.185360] ret_from_fork+0x1f/0x30
/ 0.185360] ---- end trace def9dc3cba47bc2f ]---
/ 0.185360] ------------- cut here ]------------
/ 0.185360] Attribute sbr_wait_time: Invalid permissions 01
/ 0.185360] WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:59 internal_create_group+0x2ef/0x380
/ 0.185360] Modules linked in:
/ 0.185360] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.10.2 #1
/ 0.185360] Hardware name: ASUS System Product Name/PRIME Z590-P WIFI, BIOS 1801 12/26/2022
/ 0.185360] RIP: 0010:internal_create_group+0x2ef/0x380
/ 0.185360] Code: 0f 86 c4 fd ff ff 48 83 f8 ef 0f 84 85 00 00 00 89 e8 e9 55 ff ff ff 48 8b 36 48 c7 c7 b0 d3 fb 81 89 4c 24 08 e8 6b dc 66 00 <0f> 0b 4b 8b 34 ef 8b 4c 24 08 e9 f8 fd ff ff 48 8b 73 18 48 8d 53
/ 0.185360] RSP: 0000:ffffc90000053e00 EFLAGS: 00010286
/ 0.185360] RAX: 0000000000000000 RBX: ffff888100c99748 RCX: c0000000ffffdfff
/ 0.185360] RDX: ffffc90000053c28 RSI: 00000000ffffdfff RDI: 0000000000000246
/ 0.185360] RBP: ffff888100f46380 R08: 0000000000000000 R09: ffffc90000053c20
/ 0.185360] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888100efd240
/ 0.185360] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100c0dc00
/ 0.185360] FS: 0000000000000000(0000) GS:ffff888c2f400000(0000) knlGS:0000000000000000
/ 0.185360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
/ 0.185360] CR2: 0000000000000000 CR3: 000000000420a001 CR4: 0000000000370eb0
/ 0.185360] Call Trace:
/ 0.185360] param_sysfs_init+0x168/0x1ab
/ 0.185360] ? file_caps_disable+0x10/0x10
/ 0.185360] ? locate_module_kobject+0xbf/0xbf
/ 0.185360] do_one_initcall+0x47/0x180
/ 0.185360] kernel_init_freeable+0x140/0x185
/ 0.185360] ? rest_init+0xaf/0xaf
/ 0.185360] kernel_init+0x5/0x101
/ 0.185360] ret_from_fork+0x1f/0x30
/ 0.185360] ---- end trace def9dc3cba47bc30 ]---
/ 0.185360] cryptd: max_cpu_qlen set to 1000
/ 0.185360] ACPI: Added _OSI(Module Device)
/ 0.185360] ACPI: Added _OSI(Processor Device)
/ 0.185360] ACPI: Added _OSI(3.0 _SCP Extensions)
/ 0.185360] ACPI: Added _OSI(Processor Aggregator Device)
/ 0.185360] ACPI: Added _OSI(Linux-Dell-Video)
/ 0.185360] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
/ 0.185360] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
/ 0.215373] ACPI: 10 ACPI AML tables successfully acquired and loaded
/ 0.219514] ACPI: Dynamic OEM Table Load:
/ 0.219519] ACPI: SSDT 0xFFFF888101300C00 0001CB (v02 PmRef Cpu0Psd 00003000 INTL 20180209)
/ 0.220127] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
/ 0.221067] ACPI: Dynamic OEM Table Load:
/ 0.221071] ACPI: SSDT 0xFFFF88810134A400 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20180209)
/ 0.221746] ACPI: Dynamic OEM Table Load:
/ 0.221750] ACPI: SSDT 0xFFFF88810125C000 0006CB (v02 PmRef Cpu0Ist 00003000 INTL 20180209)
/ 0.222466] ACPI: Dynamic OEM Table Load:
/ 0.222469] ACPI: SSDT 0xFFFF88810134A800 0002F4 (v02 PmRef Cpu0Hwp 00003000 INTL 20180209)
/ 0.223230] ACPI: Dynamic OEM Table Load:
/ 0.223234] ACPI: SSDT 0xFFFF88810008D000 0008E7 (v02 PmRef ApIst 00003000 INTL 20180209)
/ 0.223968] ACPI: Dynamic OEM Table Load:
/ 0.223971] ACPI: SSDT 0xFFFF88810125D800 00048A (v02 PmRef ApHwp 00003000 INTL 20180209)
/ 0.224671] ACPI: Dynamic OEM Table Load:
/ 0.224674] ACPI: SSDT 0xFFFF88810125E000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20180209)
/ 0.225371] ACPI: Dynamic OEM Table Load:
/ 0.225374] ACPI: SSDT 0xFFFF88810125E800 00048A (v02 PmRef ApCst 00003000 INTL 20180209)
/ 0.229750] ACPI: Interpreter enabled
/ 0.229756] ACPI: (supports S0 S5)
/ 0.229757] ACPI: Using IOAPIC for interrupt routing
/ 0.229777] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
/ 0.230580] ACPI: Enabled 6 GPEs in block 00 to 7F
/ 0.237426] ACPI: Power Resource eBTRT] (on)
/ 0.241299] ACPI: Power Resource eWRST] (on)
/ 0.241438] ACPI: Power Resource eV0PR] (on)
/ 0.241494] ACPI: Power Resource eV1PR] (on)
/ 0.241548] ACPI: Power Resource eV2PR] (on)
/ 0.247197] ACPI: Power Resource eFN00] (off)
/ 0.247230] ACPI: Power Resource eFN01] (off)
/ 0.247260] ACPI: Power Resource eFN02] (off)
/ 0.247290] ACPI: Power Resource eFN03] (off)
/ 0.247319] ACPI: Power Resource eFN04] (off)
/ 0.247751] ACPI: Power Resource ePIN] (off)
/ 0.247931] ACPI: PCI Root Bridge ePC00] (domain 0000 0bus 00-fe])
/ 0.247934] acpi PNP0A08:00: _OSC: OS supports sASPM ClockPM Segments MSI HPX-Type3]
/ 0.247973] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires sExtendedConfig ASPM ClockPM MSI]
/ 0.248819] PCI host bridge to bus 0000:00
/ 0.248821] pci_bus 0000:00: root bus resource eio 0x0000-0x0cf7 window]
/ 0.248822] pci_bus 0000:00: root bus resource eio 0x0d00-0xffff window]
/ 0.248823] pci_bus 0000:00: root bus resource emem 0x000a0000-0x000bffff window]
/ 0.248824] pci_bus 0000:00: root bus resource emem 0x000e0000-0x000e3fff window]
/ 0.248825] pci_bus 0000:00: root bus resource emem 0x000e4000-0x000e7fff window]
/ 0.248826] pci_bus 0000:00: root bus resource emem 0x000e8000-0x000ebfff window]
/ 0.248827] pci_bus 0000:00: root bus resource emem 0x000ec000-0x000effff window]
/ 0.248828] pci_bus 0000:00: root bus resource emem 0xa0800000-0xdfffffff window]
/ 0.248829] pci_bus 0000:00: root bus resource emem 0x4000000000-0x7fffffffff window]
/ 0.248831] pci_bus 0000:00: root bus resource ebus 00-fe]
/ 0.248838] pci 0000:00:00.0: :8086:4c43] type 00 class 0x060000
/ 0.249125] pci 0000:00:02.0: :8086:4c8a] type 00 class 0x030000
/ 0.249133] pci 0000:00:02.0: reg 0x10: :mem 0x6001000000-0x6001ffffff 64bit]
/ 0.249138] pci 0000:00:02.0: reg 0x18: :mem 0x4000000000-0x400fffffff 64bit pref]
/ 0.249141] pci 0000:00:02.0: reg 0x20: :io 0x5000-0x503f]
/ 0.249153] pci 0000:00:02.0: BAR 2: assigned to efifb
/ 0.249154] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
/ 0.249271] pci 0000:00:06.0: :8086:4c09] type 01 class 0x060400
/ 0.249315] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
/ 0.249510] pci 0000:00:14.0: :8086:43ed] type 00 class 0x0c0330
/ 0.249527] pci 0000:00:14.0: reg 0x10: :mem 0x6002100000-0x600210ffff 64bit]
/ 0.249597] pci 0000:00:14.0: PME# supported from D3hot D3cold
/ 0.249831] pci 0000:00:14.2: :8086:43ef] type 00 class 0x050000
/ 0.249849] pci 0000:00:14.2: reg 0x10: :mem 0x6002118000-0x600211bfff 64bit]
/ 0.249861] pci 0000:00:14.2: reg 0x18: :mem 0x6002120000-0x6002120fff 64bit]
/ 0.250016] pci 0000:00:14.3: :8086:43f0] type 00 class 0x028000
/ 0.250052] pci 0000:00:14.3: reg 0x10: :mem 0x6002114000-0x6002117fff 64bit]
/ 0.250155] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
/ 0.250324] pci 0000:00:15.0: :8086:43e8] type 00 class 0x0c8000
/ 0.250350] pci 0000:00:15.0: reg 0x10: :mem 0x00000000-0x00000fff 64bit]
/ 0.250601] pci 0000:00:15.1: :8086:43e9] type 00 class 0x0c8000
/ 0.250628] pci 0000:00:15.1: reg 0x10: :mem 0x00000000-0x00000fff 64bit]
/ 0.250870] pci 0000:00:16.0: :8086:43e0] type 00 class 0x078000
/ 0.250891] pci 0000:00:16.0: reg 0x10: :mem 0x600211d000-0x600211dfff 64bit]

 


Dmesg part 2: 

 

e    0.250969] pci 0000:00:16.0: PME# supported from D3hot
/ 0.251129] pci 0000:00:17.0: :8086:43d2] type 00 class 0x010601
/ 0.251142] pci 0000:00:17.0: reg 0x10: :mem 0xa1600000-0xa1601fff]
/ 0.251150] pci 0000:00:17.0: reg 0x14: :mem 0xa1603000-0xa16030ff]
/ 0.251157] pci 0000:00:17.0: reg 0x18: :io 0x5090-0x5097]
/ 0.251165] pci 0000:00:17.0: reg 0x1c: :io 0x5080-0x5083]
/ 0.251172] pci 0000:00:17.0: reg 0x20: :io 0x5060-0x507f]
/ 0.251179] pci 0000:00:17.0: reg 0x24: :mem 0xa1602000-0xa16027ff]
/ 0.251219] pci 0000:00:17.0: PME# supported from D3hot
/ 0.251361] pci 0000:00:1b.0: :8086:43c0] type 01 class 0x060400
/ 0.251436] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
/ 0.251593] pci 0000:00:1c.0: :8086:43b8] type 01 class 0x060400
/ 0.251676] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
/ 0.251820] pci 0000:00:1c.5: :8086:43bd] type 01 class 0x060400
/ 0.251895] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
/ 0.252023] pci 0000:00:1c.6: :8086:43be] type 01 class 0x060400
/ 0.252097] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
/ 0.252226] pci 0000:00:1c.7: :8086:43bf] type 01 class 0x060400
/ 0.252300] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
/ 0.252429] pci 0000:00:1d.0: :8086:43b0] type 01 class 0x060400
/ 0.252510] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
/ 0.252667] pci 0000:00:1f.0: :8086:4385] type 00 class 0x060100
/ 0.252882] pci 0000:00:1f.3: :8086:43c8] type 00 class 0x040300
/ 0.252924] pci 0000:00:1f.3: reg 0x10: :mem 0x6002110000-0x6002113fff 64bit]
/ 0.252975] pci 0000:00:1f.3: reg 0x20: :mem 0x6002000000-0x60020fffff 64bit]
/ 0.253080] pci 0000:00:1f.3: PME# supported from D3hot D3cold
/ 0.253230] pci 0000:00:1f.4: :8086:43a3] type 00 class 0x0c0500
/ 0.253253] pci 0000:00:1f.4: reg 0x10: :mem 0x600211c000-0x600211c0ff 64bit]
/ 0.253279] pci 0000:00:1f.4: reg 0x20: :io 0xefa0-0xefbf]
/ 0.253405] pci 0000:00:1f.5: :8086:43a4] type 00 class 0x0c8000
/ 0.253423] pci 0000:00:1f.5: reg 0x10: :mem 0xfe010000-0xfe010fff]
/ 0.253605] pci 0000:01:00.0: :1987:5015] type 00 class 0x010802
/ 0.253633] pci 0000:01:00.0: reg 0x10: :mem 0xa1500000-0xa1503fff 64bit]
/ 0.253798] pci 0000:00:06.0: PCI bridge to obus 01]
/ 0.253801] pci 0000:00:06.0: bridge window wmem 0xa1500000-0xa15fffff]
/ 0.253856] pci 0000:02:00.0: :1987:5015] type 00 class 0x010802
/ 0.253894] pci 0000:02:00.0: reg 0x10: :mem 0xa1400000-0xa1403fff 64bit]
/ 0.254118] pci 0000:00:1b.0: PCI bridge to obus 02]
/ 0.254123] pci 0000:00:1b.0: bridge window wmem 0xa1400000-0xa14fffff]
/ 0.254163] pci 0000:00:1c.0: PCI bridge to obus 03]
/ 0.254219] pci 0000:04:00.0: :14e4:165f] type 00 class 0x020000
/ 0.254245] pci 0000:04:00.0: reg 0x10: :mem 0x6000050000-0x600005ffff 64bit pref]
/ 0.254262] pci 0000:04:00.0: reg 0x18: :mem 0x6000040000-0x600004ffff 64bit pref]
/ 0.254279] pci 0000:04:00.0: reg 0x20: :mem 0x6000030000-0x600003ffff 64bit pref]
/ 0.254291] pci 0000:04:00.0: reg 0x30: :mem 0xa1340000-0xa137ffff pref]
/ 0.254364] pci 0000:04:00.0: PME# supported from D0 D3hot
/ 0.254386] pci 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.5 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
/ 0.254426] pci 0000:04:00.1: :14e4:165f] type 00 class 0x020000
/ 0.254452] pci 0000:04:00.1: reg 0x10: :mem 0x6000020000-0x600002ffff 64bit pref]
/ 0.254469] pci 0000:04:00.1: reg 0x18: :mem 0x6000010000-0x600001ffff 64bit pref]
/ 0.254486] pci 0000:04:00.1: reg 0x20: :mem 0x6000000000-0x600000ffff 64bit pref]
/ 0.254498] pci 0000:04:00.1: reg 0x30: :mem 0xa1300000-0xa133ffff pref]
/ 0.254570] pci 0000:04:00.1: PME# supported from D0 D3hot
/ 0.254609] pci 0000:00:1c.5: PCI bridge to obus 04]
/ 0.254613] pci 0000:00:1c.5: bridge window wmem 0xa1300000-0xa13fffff]
/ 0.254618] pci 0000:00:1c.5: bridge window wmem 0x6000000000-0x60000fffff 64bit pref]
/ 0.254648] pci 0000:00:1c.6: PCI bridge to obus 05]
/ 0.254702] pci 0000:06:00.0: :10ec:8125] type 00 class 0x020000
/ 0.254722] pci 0000:06:00.0: reg 0x10: :io 0x4000-0x40ff]
/ 0.254750] pci 0000:06:00.0: reg 0x18: :mem 0xa1200000-0xa120ffff 64bit]
/ 0.254768] pci 0000:06:00.0: reg 0x20: :mem 0xa1210000-0xa1213fff 64bit]
/ 0.254850] pci 0000:06:00.0: supports D1 D2
/ 0.254850] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
/ 0.254913] pci 0000:00:1c.7: PCI bridge to obus 06]
/ 0.254915] pci 0000:00:1c.7: bridge window wio 0x4000-0x4fff]
/ 0.254918] pci 0000:00:1c.7: bridge window wmem 0xa1200000-0xa12fffff]
/ 0.254954] pci 0000:00:1d.0: PCI bridge to obus 07]
/ 0.254957] pci 0000:00:1d.0: bridge window wio 0x3000-0x3fff]
/ 0.254960] pci 0000:00:1d.0: bridge window wmem 0xa0800000-0xa11fffff]
/ 0.255826] ACPI: PCI Interrupt Link kLNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.255869] ACPI: PCI Interrupt Link kLNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
/ 0.255911] ACPI: PCI Interrupt Link kLNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.255952] ACPI: PCI Interrupt Link kLNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.255994] ACPI: PCI Interrupt Link kLNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.256035] ACPI: PCI Interrupt Link kLNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.256076] ACPI: PCI Interrupt Link kLNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.256118] ACPI: PCI Interrupt Link kLNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
/ 0.256668] iommu: Default domain type: Passthrough (set via kernel command line)
/ 0.256676] pci 0000:00:02.0: vgaarb: setting as boot VGA device
/ 0.256676] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
/ 0.256676] pci 0000:00:02.0: vgaarb: bridge control possible
/ 0.256676] vgaarb: loaded
/ 0.256676] SCSI subsystem initialized
/ 0.256676] libata version 3.00 loaded.
/ 0.256676] ACPI: bus type USB registered
/ 0.256676] usbcore: registered new interface driver usbfs
/ 0.256676] usbcore: registered new interface driver hub
/ 0.256676] usbcore: registered new device driver usb
/ 0.256676] pps_core: LinuxPPS API ver. 1 registered
/ 0.256676] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
/ 0.256676] PTP clock support registered
/ 0.256676] Registered efivars operations
/ 0.256676] PCI: Using ACPI for IRQ routing
/ 0.256676] PCI: pci_cache_line_size set to 64 bytes
/ 0.256676] pci 0000:00:1f.5: can't claim BAR 0 0mem 0xfe010000-0xfe010fff]: no compatible bridge window
/ 0.256676] e820: reserve RAM buffer rmem 0x0009e000-0x0009ffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x762cc018-0x77ffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x762da018-0x77ffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x7630e018-0x77ffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x81984000-0x83ffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x8b620000-0x8bffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x91d1c000-0x93ffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0x96000000-0x97ffffff]
/ 0.256676] e820: reserve RAM buffer rmem 0xc5f800000-0xc5fffffff]
/ 0.256676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
/ 0.256676] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
/ 0.256713] clocksource: Switched to clocksource tsc-early
/ 0.256713] pnp: PnP ACPI init
/ 0.256713] system 00:00: :io 0x0290-0x029f] has been reserved
/ 0.256713] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
/ 0.256713] pnp 00:01: :dma 0 disabled]
/ 0.256713] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
/ 0.256713] system 00:02: :io 0x0680-0x069f] has been reserved
/ 0.256713] system 00:02: :io 0x164e-0x164f] has been reserved
/ 0.256713] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
/ 0.256713] system 00:03: :io 0x1854-0x1857] has been reserved
/ 0.256713] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
/ 0.256713] system 00:04: :mem 0xfed10000-0xfed17fff] has been reserved
/ 0.256713] system 00:04: :mem 0xfeda0000-0xfeda0fff] has been reserved
/ 0.256713] system 00:04: :mem 0xfeda1000-0xfeda1fff] has been reserved
/ 0.256713] system 00:04: :mem 0xe0000000-0xefffffff] has been reserved
/ 0.256713] system 00:04: :mem 0xfed20000-0xfed7ffff] could not be reserved
/ 0.256713] system 00:04: :mem 0xfed90000-0xfed93fff] could not be reserved
/ 0.256713] system 00:04: :mem 0xfed45000-0xfed8ffff] could not be reserved
/ 0.256713] system 00:04: :mem 0xfee00000-0xfeefffff] could not be reserved
/ 0.256713] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
/ 0.256713] system 00:05: :io 0x1800-0x18fe] could not be reserved
/ 0.256713] system 00:05: :mem 0xfe000000-0xfe01ffff] could not be reserved
/ 0.256713] system 00:05: :mem 0xfe04c000-0xfe04ffff] has been reserved
/ 0.256713] system 00:05: :mem 0xfe050000-0xfe0affff] has been reserved
/ 0.256713] system 00:05: :mem 0xfe0d0000-0xfe0fffff] has been reserved
/ 0.256713] system 00:05: :mem 0xfe200000-0xfe7fffff] has been reserved
/ 0.256713] system 00:05: :mem 0xff000000-0xffffffff] has been reserved
/ 0.256713] system 00:05: :mem 0xfd000000-0xfd68ffff] has been reserved
/ 0.256713] system 00:05: :mem 0xfd6c0000-0xfd6cffff] has been reserved
/ 0.256713] system 00:05: :mem 0xfd6f0000-0xfdffffff] has been reserved
/ 0.256713] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
/ 0.256713] system 00:06: :io 0x2000-0x20fe] has been reserved
/ 0.256713] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
/ 0.256713] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
/ 0.256713] pnp: PnP ACPI: found 8 devices
/ 0.260925] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
/ 0.260939] NET: Registered protocol family 2
/ 0.260982] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
/ 0.261014] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
/ 0.261269] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
/ 0.261328] TCP: Hash tables configured (established 524288 bind 65536)
/ 0.261346] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
/ 0.261417] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
/ 0.261497] NET: Registered protocol family 1
/ 0.261542] RPC: Registered named UNIX socket transport module.
/ 0.261544] RPC: Registered udp transport module.
/ 0.261545] RPC: Registered tcp transport module.
/ 0.261546] RPC: Registered tcp NFSv4.1 backchannel transport module.
/ 0.261551] pci 0000:00:1d.0: bridge window wmem 0x00100000-0x000fffff 64bit pref] to obus 07] add_size 200000 add_align 100000
/ 0.261555] pci 0000:00:1d.0: BAR 9: assigned dmem 0x4010000000-0x40101fffff 64bit pref]
/ 0.261557] pci 0000:00:15.0: BAR 0: assigned dmem 0x4010200000-0x4010200fff 64bit]
/ 0.261615] pci 0000:00:15.1: BAR 0: assigned dmem 0x4010201000-0x4010201fff 64bit]
/ 0.261676] pci 0000:00:1f.5: BAR 0: assigned dmem 0xa1604000-0xa1604fff]
/ 0.261686] pci 0000:00:06.0: PCI bridge to obus 01]
/ 0.261689] pci 0000:00:06.0: bridge window wmem 0xa1500000-0xa15fffff]
/ 0.261693] pci 0000:00:1b.0: PCI bridge to obus 02]
/ 0.261705] pci 0000:00:1b.0: bridge window wmem 0xa1400000-0xa14fffff]
/ 0.261711] pci 0000:00:1c.0: PCI bridge to obus 03]
/ 0.261725] pci 0000:00:1c.5: PCI bridge to obus 04]
/ 0.261729] pci 0000:00:1c.5: bridge window wmem 0xa1300000-0xa13fffff]
/ 0.261732] pci 0000:00:1c.5: bridge window wmem 0x6000000000-0x60000fffff 64bit pref]
/ 0.261736] pci 0000:00:1c.6: PCI bridge to obus 05]
/ 0.261745] pci 0000:00:1c.7: PCI bridge to obus 06]
/ 0.261747] pci 0000:00:1c.7: bridge window wio 0x4000-0x4fff]
/ 0.261750] pci 0000:00:1c.7: bridge window wmem 0xa1200000-0xa12fffff]
/ 0.261757] pci 0000:00:1d.0: PCI bridge to obus 07]
/ 0.261759] pci 0000:00:1d.0: bridge window wio 0x3000-0x3fff]
/ 0.261762] pci 0000:00:1d.0: bridge window wmem 0xa0800000-0xa11fffff]
/ 0.261765] pci 0000:00:1d.0: bridge window wmem 0x4010000000-0x40101fffff 64bit pref]
/ 0.261771] pci_bus 0000:00: resource 4 4io 0x0000-0x0cf7 window]
/ 0.261772] pci_bus 0000:00: resource 5 5io 0x0d00-0xffff window]
/ 0.261772] pci_bus 0000:00: resource 6 6mem 0x000a0000-0x000bffff window]
/ 0.261773] pci_bus 0000:00: resource 7 7mem 0x000e0000-0x000e3fff window]
/ 0.261774] pci_bus 0000:00: resource 8 8mem 0x000e4000-0x000e7fff window]
/ 0.261775] pci_bus 0000:00: resource 9 9mem 0x000e8000-0x000ebfff window]
/ 0.261776] pci_bus 0000:00: resource 10 0mem 0x000ec000-0x000effff window]
/ 0.261777] pci_bus 0000:00: resource 11 1mem 0xa0800000-0xdfffffff window]
/ 0.261778] pci_bus 0000:00: resource 12 2mem 0x4000000000-0x7fffffffff window]
/ 0.261779] pci_bus 0000:01: resource 1 1mem 0xa1500000-0xa15fffff]
/ 0.261780] pci_bus 0000:02: resource 1 1mem 0xa1400000-0xa14fffff]
/ 0.261781] pci_bus 0000:04: resource 1 1mem 0xa1300000-0xa13fffff]
/ 0.261782] pci_bus 0000:04: resource 2 2mem 0x6000000000-0x60000fffff 64bit pref]
/ 0.261783] pci_bus 0000:06: resource 0 0io 0x4000-0x4fff]
/ 0.261784] pci_bus 0000:06: resource 1 1mem 0xa1200000-0xa12fffff]
/ 0.261785] pci_bus 0000:07: resource 0 0io 0x3000-0x3fff]
/ 0.261786] pci_bus 0000:07: resource 1 1mem 0xa0800000-0xa11fffff]
/ 0.261786] pci_bus 0000:07: resource 2 2mem 0x4010000000-0x40101fffff 64bit pref]
/ 0.261852] pci 0000:00:02.0: Video device with shadowed ROM at tmem 0x000c0000-0x000dffff]
/ 0.262129] PCI: CLS 64 bytes, default 64
/ 0.262146] Unpacking initramfs...
/ 0.381938] Freeing initrd memory: 30572K
/ 0.381972] DMAR: No ATSR found
/ 0.382007] DMAR: dmar0: Using Queued invalidation
/ 0.382009] DMAR: dmar1: Using Queued invalidation
/ 0.382255] pci 0000:00:00.0: Adding to iommu group 0
/ 0.382260] pci 0000:00:02.0: Adding to iommu group 1
/ 0.382266] pci 0000:00:06.0: Adding to iommu group 2
/ 0.382274] pci 0000:00:14.0: Adding to iommu group 3
/ 0.382278] pci 0000:00:14.2: Adding to iommu group 3
/ 0.382282] pci 0000:00:14.3: Adding to iommu group 4
/ 0.382289] pci 0000:00:15.0: Adding to iommu group 5
/ 0.382293] pci 0000:00:15.1: Adding to iommu group 5
/ 0.382299] pci 0000:00:16.0: Adding to iommu group 6
/ 0.382303] pci 0000:00:17.0: Adding to iommu group 7
/ 0.382308] pci 0000:00:1b.0: Adding to iommu group 8
/ 0.382319] pci 0000:00:1c.0: Adding to iommu group 9
/ 0.382324] pci 0000:00:1c.5: Adding to iommu group 9
/ 0.382329] pci 0000:00:1c.6: Adding to iommu group 9
/ 0.382333] pci 0000:00:1c.7: Adding to iommu group 9
/ 0.382339] pci 0000:00:1d.0: Adding to iommu group 10
/ 0.382350] pci 0000:00:1f.0: Adding to iommu group 11
/ 0.382354] pci 0000:00:1f.3: Adding to iommu group 11
/ 0.382359] pci 0000:00:1f.4: Adding to iommu group 11
/ 0.382364] pci 0000:00:1f.5: Adding to iommu group 11
/ 0.382366] pci 0000:01:00.0: Adding to iommu group 2
/ 0.382368] pci 0000:02:00.0: Adding to iommu group 8
/ 0.382370] pci 0000:04:00.0: Adding to iommu group 9
/ 0.382372] pci 0000:04:00.1: Adding to iommu group 9
/ 0.382374] pci 0000:06:00.0: Adding to iommu group 9
/ 0.382442] DMAR: Intel(R) Virtualization Technology for Directed I/O
/ 0.382443] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
/ 0.382444] software IO TLB: mapped dmem 0x0000000086bdd000-0x000000008abdd000] (64MB)
/ 0.382598] kvm: already loaded the other module
/ 0.382600] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
/ 0.382612] clocksource: Switched to clocksource tsc
/ 0.382619] platform rtc_cmos: registered platform RTC device (no PNP device found)
/ 0.383104] Initialise system trusted keyrings
/ 0.383117] workingset: timestamp_bits=56 max_order=24 bucket_order=0
/ 0.383545] squashfs: version 4.0 (2009/01/31) Phillip Lougher
/ 0.383606] ntfs: driver 2.1.32 2Flags: R/W DEBUG].
/ 0.383631] fuse: init (API version 7.32)
/ 0.383675] Key type asymmetric registered
/ 0.383676] Asymmetric key parser 'x509' registered
/ 0.383678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
/ 0.383679] io scheduler mq-deadline registered
/ 0.383680] io scheduler kyber registered
/ 0.384388] efifb: probing for efifb
/ 0.384393] efifb: framebuffer at 0x4000000000, using 3072k, total 3072k
/ 0.384394] efifb: mode is 1024x768x32, linelength=4096, pages=1
/ 0.384395] efifb: scrolling: redraw
/ 0.384396] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
/ 0.385546] Console: switching to colour frame buffer device 128x48
/ 0.386665] fb0: EFI VGA frame buffer device
/ 0.386676] intel_idle: MWAIT substates: 0x11121020
/ 0.386768] Monitor-Mwait will be used to enter C-1 state
/ 0.386772] Monitor-Mwait will be used to enter C-2 state
/ 0.386775] Monitor-Mwait will be used to enter C-3 state
/ 0.386777] ACPI: \_SB_.PR00: Found 3 idle states
/ 0.386784] intel_idle: v0.5.1 model 0xA7
/ 0.386949] intel_idle: Local APIC timer is reliable in all C-states
/ 0.386949] IPMI message handler: version 39.2
/ 0.386963] ipmi device interface
/ 0.386973] ipmi_si: IPMI System Interface driver
/ 0.387007] ipmi_si: Unable to find any System Interface(s)
/ 0.388026] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
/ 0.388049] ACPI: Sleep Button nSLPB]
/ 0.388066] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
/ 0.388083] ACPI: Power Button nPWRB]
/ 0.388097] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
/ 0.388232] ACPI: Power Button nPWRF]
/ 0.389241] thermal LNXTHERM:00: registered as thermal_zone0
/ 0.389253] ACPI: Thermal Zone eTZ00] (28 C)
/ 0.389289] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
/ 0.389356] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
/ 0.389603] i915 0000:00:02.0: Your graphics device 4c8a is not properly supported by the driver in this
kernel version. To force driver probe anyway, use i915.force_probe=4c8a
module parameter or CONFIG_DRM_I915_FORCE_PROBE=4c8a configuration option,
or (recommended) check for kernel updates.
/ 0.391045] loop: module loaded
/ 0.391073] zram: Added device: zram0
/ 0.391121] libphy: Fixed MDIO Bus: probed
/ 0.391659] VFIO - User Level meta-driver version: 0.3
/ 0.392265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
/ 0.392789] ehci-pci: EHCI PCI platform driver
/ 0.393317] uhci_hcd: USB Universal Host Controller Interface driver
/ 0.393907] xhci_hcd 0000:00:14.0: xHCI Host Controller
/ 0.394433] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
/ 0.396024] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009810
/ 0.396549] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
/ 0.397231] hub 1-0:1.0: USB hub found
/ 0.397771] hub 1-0:1.0: 16 ports detected
/ 0.399428] xhci_hcd 0000:00:14.0: xHCI Host Controller
/ 0.399942] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
/ 0.400449] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
/ 0.401031] hub 2-0:1.0: USB hub found
/ 0.401567] hub 2-0:1.0: 9 ports detected
/ 0.402674] usbcore: registered new interface driver usb-storage
/ 0.403186] i8042: PNP: No PS/2 controller found.
/ 0.403709] rtc_cmos rtc_cmos: RTC can wake from S4
/ 0.404740] rtc_cmos rtc_cmos: registered as rtc0
/ 0.405405] rtc_cmos rtc_cmos: setting system clock to 2024-05-16T11:19:55 UTC (1715858395)
/ 0.405930] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
/ 0.406519] i801_smbus 0000:00:1f.4: SPD Write Disable is set
/ 0.407067] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
/ 0.408035] i2c i2c-0: 4/4 memory slots populated (from DMI)
/ 0.408981] i2c i2c-0: Successfully instantiated SPD at 0x50
/ 0.409906] i2c i2c-0: Successfully instantiated SPD at 0x51
/ 0.410828] i2c i2c-0: Successfully instantiated SPD at 0x52
/ 0.411737] i2c i2c-0: Successfully instantiated SPD at 0x53
/ 0.412296] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
/ 0.412797] intel_pstate: Intel P-state driver initializing
/ 0.415081] intel_pstate: HWP enabled
/ 0.415578] EFI Variables Facility v0.08 2004-May-17
/ 0.424234] usbcore: registered new interface driver usbhid
/ 0.424774] usbhid: USB HID core driver
/ 0.425336] NET: Registered protocol family 10
/ 0.425899] Segment Routing with IPv6
/ 0.426383] NET: Registered protocol family 17
/ 0.426828] 8021q: 802.1Q VLAN Support v1.8
/ 0.427355] microcode: sig=0xa0671, pf=0x2, revision=0x54
/ 0.428269] microcode: Microcode Update Driver: v2.2.
/ 0.428270] IPI shorthand broadcast: enabled
/ 0.429190] AVX2 version of gcm_enc/dec engaged.
/ 0.429638] AES CTR mode by8 optimization enabled
/ 0.430391] sched_clock: Marking stable (439892400, -9501797)->(442863643, -12473040)
/ 0.430889] registered taskstats version 1
/ 0.431346] Loading compiled-in X.509 certificates
/ 0.432122] Loaded X.509 cert 'Build time autogenerated kernel key: 5e4e0bdbcfb9ec45b35e3b1442f658469e60aff8'
/ 0.432635] Key type encrypted registered
/ 0.433889] Freeing unused kernel image (initmem) memory: 1176K
/ 0.584427] Write protecting the kernel read-only data: 18432k
/ 0.587402] Freeing unused kernel image (text/rodata gap) memory: 2040K
/ 0.589598] Freeing unused kernel image (rodata/data gap) memory: 1288K
/ 0.591214] rodata_test: all tests were successful
/ 0.592844] Run /init as init process
/ 0.594436] with arguments:
/ 0.594438] /init
/ 0.594439] with environment:
/ 0.594441] HOME=/
/ 0.594442] TERM=linux
/ 0.594443] BOOT_IMAGE=/boot/kernel
/ 0.594445] intel_iommu=on
/ 0.594446] vga=791
/ 0.594447] IMG=squashfs
/ 0.660909] mpt3sas: loading out-of-tree module taints kernel.
/ 0.663399] mpt3sas version 40.00.00.00 loaded
/ 0.764465] usb 1-2: new high-speed USB device number 2 using xhci_hcd
/ 0.947375] hub 1-2:1.0: USB hub found
/ 0.947757] hub 1-2:1.0: 4 ports detected
/ 1.010118] ahci 0000:00:17.0: version 3.0
/ 1.010634] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
/ 1.010639] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds
/ 1.094440] usb 1-7: new full-speed USB device number 3 using xhci_hcd
/ 1.115231] scsi host0: ahci
/ 1.115778] scsi host1: ahci
/ 1.116241] scsi host2: ahci
/ 1.116678] scsi host3: ahci
/ 1.116777] ata1: SATA max UDMA/133 abar m2048@0xa1602000 port 0xa1602100 irq 130
/ 1.116781] ata2: SATA max UDMA/133 abar m2048@0xa1602000 port 0xa1602180 irq 130
/ 1.116785] ata3: SATA max UDMA/133 abar m2048@0xa1602000 port 0xa1602200 irq 130
/ 1.116788] ata4: SATA max UDMA/133 abar m2048@0xa1602000 port 0xa1602280 irq 130
/ 1.283254] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C52B.0001/input/input3
/ 1.344431] hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard dLogitech USB Receiver] on usb-0000:00:14.0-7/input0
/ 1.348199] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C52B.0002/input/input4
/ 1.348271] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C52B.0002/input/input5
/ 1.414485] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C52B.0002/input/input6
/ 1.414504] hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Mouse eLogitech USB Receiver] on usb-0000:00:14.0-7/input1
/ 1.417307] hid-generic 0003:046D:C52B.0003: device has no listeners, quitting
/ 1.446652] ata4: SATA link down (SStatus 4 SControl 300)
/ 1.446742] ata3: SATA link down (SStatus 4 SControl 300)
/ 1.446803] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
/ 1.446837] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
/ 1.449271] ata1.00: ATA-9: Inland SATA SSD, V0609B0, max UDMA/133
/ 1.449276] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
/ 1.452851] ata1.00: configured for UDMA/133
/ 1.453040] scsi 0:0:0:0: Direct-Access ATA Inland SATA SSD 9B0 PQ: 0 ANSI: 5
/ 1.453371] scsi 0:0:0:0: Attached scsi generic sg0 type 0
/ 1.453554] sd 0:0:0:0: :sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
/ 1.453568] sd 0:0:0:0: :sda] Write Protect is off
/ 1.453571] sd 0:0:0:0: :sda] Mode Sense: 00 3a 00 00
/ 1.453589] sd 0:0:0:0: :sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
/ 1.484305] ata2.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
/ 1.484310] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
/ 1.497518] sda: sda1 sda5 sda6 sda7 sda8
/ 1.498480] sd 0:0:0:0: :sda] Attached SCSI disk
/ 1.544238] ata2.00: configured for UDMA/133
/ 1.544432] scsi 1:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
/ 1.544744] sd 1:0:0:0: Attached scsi generic sg1 type 0
/ 1.544767] sd 1:0:0:0: :sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
/ 1.544772] sd 1:0:0:0: :sdb] 4096-byte physical blocks
/ 1.544783] sd 1:0:0:0: :sdb] Write Protect is off
/ 1.544787] sd 1:0:0:0: :sdb] Mode Sense: 00 3a 00 00
/ 1.544804] sd 1:0:0:0: :sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
/ 1.564417] usb 1-8: new full-speed USB device number 4 using xhci_hcd
/ 1.638312] sdb: sdb1
/ 1.638890] sd 1:0:0:0: :sdb] Attached SCSI disk
/ 1.701126] nvme 0000:01:00.0: platform quirk: setting simple suspend
/ 1.701141] nvme nvme0: pci function 0000:01:00.0
/ 1.701177] nvme 0000:02:00.0: platform quirk: setting simple suspend
/ 1.701190] nvme nvme1: pci function 0000:02:00.0
/ 1.716925] nvme nvme1: missing or invalid SUBNQN field.
/ 1.722259] nvme nvme1: allocated 64 MiB host memory buffer.
/ 1.727854] nvme nvme0: allocated 64 MiB host memory buffer.
/ 1.757061] nvme nvme1: 8/0/0 default/read/poll queues
/ 1.760413] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0004/input/input8
/ 1.763729] nvme nvme0: 8/0/0 default/read/poll queues
/ 1.773443] nvme0n1: p1 p2 p3
/ 1.814846] tg3 0000:04:00.0 eth0: Tigon3 3partno(BCM95720) rev 5720000] (PCI Express) MAC address 1c:fd:08:7c:47:90
/ 1.814851] tg3 0000:04:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeede1], EEEE1])
/ 1.814855] tg3 0000:04:00.0 eth0: RXcsumsm1] LinkChgREGE0] MIirqr0] ASFS1] TSOcapa1]
/ 1.814859] tg3 0000:04:00.0 eth0: dma_rwctrlr00000001] dma_masks64-bit]
/ 1.824437] hid-generic 0003:046D:C534.0004: input: USB HID v1.11 Keyboard dLogitech USB Receiver] on usb-0000:00:14.0-8/input0
/ 1.826965] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0005/input/input9
/ 1.827036] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0005/input/input10
/ 1.873943] tg3 0000:04:00.1 eth1: Tigon3 3partno(BCM95720) rev 5720000] (PCI Express) MAC address 1c:fd:08:7c:47:91
/ 1.873949] tg3 0000:04:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeede1], EEEE1])
/ 1.873952] tg3 0000:04:00.1 eth1: RXcsumsm1] LinkChgREGE0] MIirqr0] ASFS1] TSOcapa1]
/ 1.873955] tg3 0000:04:00.1 eth1: dma_rwctrlr00000001] dma_masks64-bit]
/ 1.885153] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
/ 1.894534] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0005/input/input11
/ 1.894551] hid-generic 0003:046D:C534.0005: input: USB HID v1.11 Mouse eLogitech USB Receiver] on usb-0000:00:14.0-8/input1
/ 1.915254] libphy: r8169: probed
/ 1.915565] r8169 0000:06:00.0 eth2: RTL8125B, 04:42:1a:09:88:31, XID 641, IRQ 149
/ 1.915569] r8169 0000:06:00.0 eth2: jumbo features sframes: 9194 bytes, tx checksumming: ko]
/ 1.980003] ice: Intel(R) Ethernet Connection E800 Series Linux Driver - version 1.7.16
/ 1.980004] ice: Copyright (C) 2018-2021, Intel Corporation.
/ 2.044399] usb 1-12: new high-speed USB device number 5 using xhci_hcd
/ 2.227881] usb-storage 1-12:1.0: USB Mass Storage device detected
/ 2.228301] scsi host4: usb-storage 1-12:1.0
/ 2.374432] usb 1-13: new full-speed USB device number 6 using xhci_hcd
/ 2.556185] usb 1-13: config 1 has an invalid interface number: 2 but max is 1
/ 2.556190] usb 1-13: config 1 has no interface number 1
/ 2.560151] hid-generic 0003:0B05:19AF.0006: device has no listeners, quitting
/ 2.704415] usb 1-14: new full-speed USB device number 7 using xhci_hcd
/ 2.889139] random: fast init done
/ 3.305713] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Glide 1.00 PQ: 0 ANSI: 6
/ 3.306194] sd 4:0:0:0: Attached scsi generic sg2 type 0
/ 3.306876] sd 4:0:0:0: :sdc] 240328704 512-byte logical blocks: (123 GB/115 GiB)
/ 3.309094] sd 4:0:0:0: :sdc] Write Protect is off
/ 3.309099] sd 4:0:0:0: :sdc] Mode Sense: 43 00 00 00
/ 3.309944] sd 4:0:0:0: :sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
/ 3.369645] sdc: sdc1
/ 3.373087] sd 4:0:0:0: :sdc] Attached SCSI removable disk
/ 5.632751] tg3 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex
/ 5.632752] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX
/ 5.632753] tg3 0000:04:00.0 eth0: EEE is disabled
/ 5.632764] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/ 21.238960] r8169 0000:06:00.0: Direct firmware load for rtl_nic/rtl8125b-2.fw failed with error -2
/ 21.238965] r8169 0000:06:00.0: Unable to load firmware rtl_nic/rtl8125b-2.fw (-2)
/ 21.274425] RTL8226B_RTL8221B 2.5Gbps PHY r8169-600:00: attached PHY driver rRTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
/ 21.402907] r8169 0000:06:00.0 eth2: No native access to PCI extended config space, falling back to CSI
/ 21.444734] r8169 0000:06:00.0 eth2: Link is Down
/ 38.143324] random: crng init done
/ 64.947725] systemdm1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
/ 64.984564] systemdm1]: Detected architecture x86-64.
/ 65.010717] systemdm1]: Started Forward Password Requests to Wall Directory Watch.
/ 65.011674] systemdm1]: Created slice Root Slice.
/ 65.012583] systemdm1]: Listening on LVM2 poll daemon socket.
/ 65.013349] systemdm1]: Created slice User and Session Slice.
/ 65.014028] systemdm1]: Listening on udev Control Socket.
/ 65.014716] systemdm1]: Listening on Device-mapper event daemon FIFOs.
/ 65.015374] systemdm1]: Listening on Delayed Shutdown Socket.
/ 65.015972] systemdm1]: Listening on LVM2 metadata daemon socket.
/ 65.021307] systemd-readaheada740]: Failed to create fanotify object: Function not implemented
/ 65.038469] systemd-journaldl741]: Received request to flush runtime journal from PID 1
/ 108.903457] sda: sda1 sda5 sda6 sda7 sda8
/ 108.907918] sdb: sdb1
/ 108.981382] nvme0n1: p1 p2 p3

 


installer.log

 

2024-05-16 11:21:38,601 INFO  Scanning devices to assemble RAID. This may take few minutes
2024-05-16 11:21:38,602 INFO Scanning devices: 'sda', 'nvme0n1']
2024-05-16 11:21:39,527 INFO Model detected: CommunityEdition
2024-05-16 11:21:41,870 INFO vpd_info {'rackable_unit_serial': u'Default string', 'vpd_method': None, 'node_serial': u'System Serial Number'}
2024-05-16 11:21:41,870 INFO Using block_id from FRU
2024-05-16 11:21:41,870 INFO Generating cluster_id
2024-05-16 11:21:41,870 INFO node_serial = f9db6326-5fc9-428d-91bc-d024dba53925, node_uuid = 25c298a1-fb76-4a10-9a46-a87e9d54e646, block_id = Default string, cluster_id = 339182028887525425, model = USE_LAYOUT, model_string = CommunityEdition, node_position =
2024-05-16 11:21:43,164 INFO Re-reading partition table for nvme1n1
2024-05-16 11:21:43,165 INFO Calling dmsetup remove /dev/mapper/pve-swap
2024-05-16 11:21:43,239 INFO Calling dmsetup remove /dev/mapper/pve-root
2024-05-16 11:21:43,430 INFO Calling dmsetup remove /dev/mapper/NVME2-vm--101--disk--0
2024-05-16 11:21:43,529 INFO Calling dmsetup remove /dev/mapper/NVME2-vm--106--disk--0
2024-05-16 11:21:43,619 INFO Calling dmsetup remove /dev/mapper/NVME2-vm--102--disk--0
2024-05-16 11:21:43,699 INFO Calling dmsetup remove /dev/mapper/NVME2-vm--105--disk--0
2024-05-16 11:21:43,769 INFO Calling dmsetup remove /dev/mapper/NVME2-vm--104--disk--0
2024-05-16 11:21:44,720 INFO LVM volume group ahv was not detected; assuming that AHV is installed on normal partitions
2024-05-16 11:21:44,890 INFO LVM volume group ahv was not detected; assuming that AHV is installed on normal partitions
2024-05-16 11:21:45,377 INFO Boot disk is nvme, skipping device_busy check
2024-05-16 11:21:45,406 INFO Getting NOS version from the CVM
2024-05-16 11:21:45,571 DEBUG Marker file found, skipping assembling RAID again
2024-05-16 11:21:45,975 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:29:09,163 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:29:10,112 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:29:11,479 INFO Phoenix ISO is already mounted
2024-05-16 11:29:30,583 INFO Picking the bundled hypervisor:/mnt/svm_installer/./install/ahv/kvm_host_bundle_20220304.342.iso
2024-05-16 11:29:31,010 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:30:12,333 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:30:13,244 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:30:14,146 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:30:15,048 INFO Getting AOS version from /mnt/iso/images/svm/nutanix_installer_package.tar.p00, This may take a few minutes if phoenix is running from BMC
2024-05-16 11:30:22,058 INFO Phoenix ISO is already mounted
2024-05-16 11:30:41,235 INFO Picking the bundled hypervisor:/mnt/svm_installer/./install/ahv/kvm_host_bundle_20220304.342.iso
2024-05-16 11:30:41,388 INFO Phoenix ISO is already mounted
2024-05-16 11:31:00,508 INFO Picking the bundled hypervisor:/mnt/svm_installer/./install/ahv/kvm_host_bundle_20220304.342.iso
2024-05-16 11:31:40,952 DEBUG Available memory 46.8411407471, Max allowed memory for CVM: 40.8411407471
2024-05-16 11:31:40,952 DEBUG Using new CVM sizing policy: False
2024-05-16 11:31:40,952 DEBUG Determining numa node for allocating vcpu
2024-05-16 11:31:40,952 DEBUG Determining numa node for storage controller:
2024-05-16 11:31:40,953 ERROR Couldn't determine numa_node for device, exception: StandardError(u"Failed command: lspci -d -nm] with error: lspci: -d: ':' expected]\nout: ]",)
2024-05-16 11:31:40,953 DEBUG Couldn't determine numa node for storage controller
2024-05-16 11:31:40,953 DEBUG Couldn't identify a numa node, falling back to 0
2024-05-16 11:31:40,966 DEBUG Computed CVM size to be vcpu 4, mem 16
2024-05-16 11:31:40,966 DEBUG Enabling numa because sufficient memory and CPUs available on a numa node 0
2024-05-16 11:31:40,980 INFO Running CVM Installer
2024-05-16 11:31:40,981 INFO Generating unique SSH identity for this Hypervisor-CVM pair.
2024-05-16 11:31:41,084 INFO Generating SSL certificate for this Hypervisor-CVM pair.
2024-05-16 11:31:41,087 INFO Extracting the SVM installer into memory. This will take some time...


2024-05-16 11:31:56,911 ERROR An error occured while trying to illuminate the chassis LED
2024-05-16 11:31:56,911 FATAL An exception was raised: Traceback (most recent call last):
File "./phoenix", line 152, in <module>
main()
File "./phoenix", line 148, in main
imagingUtil.image_node(params, unattended=unattended)
File "/root/phoenix/imagingUtil.py", line 349, in image_node
SVM_INSTALL_BASE)], ttyout=True)
File "/root/phoenix/shell.py", line 53, in shell_cmd
raise StandardError(err_msg)
StandardError: Failed command: tar xvf \/mnt\/svm\_installer\/nos\.tar -C /mnt/svm_installer --totals] with error: None]
out: None]

 


Hardware causing I/O errors is not uncommon, especially for the USB bus.      There does seem to be a few checkstop errors in the dmesg from a processor perspective but they’re recovered.   What also concerns me is that it’s failing when trying to extract the nos tarball into memory.  

I know you said you have 48GB of memory in the system.   With it booted up can you confirm that it actually sees all 48GB of memory, and possibly run memtest86 against your system.   I’m wondering if you have a bad DIMM that might be causing this issue?

Outside of that I’m sorry but I’m at a loss.  Never seen this type of failure in any of our testing without it being something hardware related.   


Probably won’t get to it today, but i’ll definitely give it a shot. I appreciate all the help. 

 


I finally got some time to revisit this tonight. Found the issue in about 10 minutes (spoiler alert, and not a shocker, I’m an idiot)…

 

Nothing like checking the RAM is physically seated and realizing you don’t have the modules (two 8G and two 16G) paired in the wrong slots. Swapped modules to the correct slots and poof… installed with zero issues. Appreciate all the assistance. Extracting the nos.tar had to be pushing data into memory where it wasn’t paired correctly. 

 

Appreciate all the assistance! 

 

Chris