Solved
Nutanix with Nexus Switch
+2Dear Expert, My Nutanix environment as per below: 4block of Nutanix ( 8 Node ) connect to Nexus Access Switch with 10G SPF cable. Hypervisor: VMware 5.5 Issue: from vCenter we detect the host keep disconnected randomly. and vCenter become HANG Workaround: Ping continuously on Host. Result No packet drop can you please advise what need to do Regards, Hamballi
Best answer by Jon
Hamballi - Can you please open up a support ticket? Use portal.nutanix.com for NX or SX series hardware, and the respective OEM support site for Dell XC or Lenovo HX.
That said, we do have a recommended switch configuration document for Nexus switches, posted here: https://portal.nutanix.com/#/page/kbs/details?targetId=kA032000000TT4kCAG
It sounds like there might be a mismatch between how the switch is configured, and how the vSwitches on the host are configured.
For example, if you've set up Cisco VPC on the switchports, but have not setup LACP or static etherchannel on the ESXi side, it will cause problems like you describe.
View originalThat said, we do have a recommended switch configuration document for Nexus switches, posted here: https://portal.nutanix.com/#/page/kbs/details?targetId=kA032000000TT4kCAG
It sounds like there might be a mismatch between how the switch is configured, and how the vSwitches on the host are configured.
For example, if you've set up Cisco VPC on the switchports, but have not setup LACP or static etherchannel on the ESXi side, it will cause problems like you describe.
This topic has been closed for replies.
Hamballi have you deployed multiple vlan on vCenter, ESXi host, UVM ?
please post your networking config on ESXi and Nexus
please post your networking config on ESXi and Nexus
+5Hamballi
Nutanix doesn't work well on FEX switches e.g. Nexus 2000 series. Another problem is whether your vSphere 5.5 is it updated to 5.5 Update 3b? I have this disconnection issue on some of my 5.5 hosts which are on Update 3a.
Nutanix doesn't work well on FEX switches e.g. Nexus 2000 series. Another problem is whether your vSphere 5.5 is it updated to 5.5 Update 3b? I have this disconnection issue on some of my 5.5 hosts which are on Update 3a.
+29- Nutanix Employee
- Answer
Hamballi - Can you please open up a support ticket? Use portal.nutanix.com for NX or SX series hardware, and the respective OEM support site for Dell XC or Lenovo HX.
That said, we do have a recommended switch configuration document for Nexus switches, posted here: https://portal.nutanix.com/#/page/kbs/details?targetId=kA032000000TT4kCAG
It sounds like there might be a mismatch between how the switch is configured, and how the vSwitches on the host are configured.
For example, if you've set up Cisco VPC on the switchports, but have not setup LACP or static etherchannel on the ESXi side, it will cause problems like you describe.
That said, we do have a recommended switch configuration document for Nexus switches, posted here: https://portal.nutanix.com/#/page/kbs/details?targetId=kA032000000TT4kCAG
It sounds like there might be a mismatch between how the switch is configured, and how the vSwitches on the host are configured.
For example, if you've set up Cisco VPC on the switchports, but have not setup LACP or static etherchannel on the ESXi side, it will cause problems like you describe.
+5Unfortunately I didn't test it out because of some internal issue. The recommendation to patch to 5.5 Update 3b came from VMware support.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.