Nutanix Cloud Clusters (NC2)

Hybrid Clouds on Your Terms

  • 50 Topics
  • 63 Replies

50 Topics

J
JayakumarTrailblazer
asked in Nutanix Cloud Clusters (NC2)

Storage and cloud queries

Hi Team,           I need clarifications on  the below two points. If there is a requirement to create storage container capacity usable space as 1TB, which means is to  create 2TB as the advertised capacity in Rf2 based container? If I create 100GB disk in RF2 container, the unique data  is only 50 GB ? What are the on-prem requirements to build NC2 on azure ?

3
dlink7
1 day ago
P
parideScout
asked in Nutanix Cloud Clusters (NC2)

PS NX-3460-G6

Hi everyone, I have an NX-3460-G6 that was turned off yesterday by accidentally unplugging the power cables. I tried to turn it back on, but the power supplies (PSU) have green LEDs flashing (the other LED is off). Now from the documentation I see that it could be one of two causes: 1) "When AC is present only: 12VSB on (PS off) of PS in sleep state (the LED should flash at i Hz). 2) Power supply firmware updating mode (the LED should flash at 2 Hz).

0
P
7 days ago
D
Derek_LevelScout
asked in Nutanix Cloud Clusters (NC2)

Experience converting AHV VM to EC2 instance in AWS sought

the druva backup tool will do a backup of ahv vms into their cloud storage.  but they dont yet convert them into an ec2 instance for a DR solution.  trying to find a way get a DR type result.

0
D
3 months ago
H
Hazem RagabVoyager
asked in Nutanix Cloud Clusters (NC2)

Nutanix on Azure bare metal pricing

Hi Team I was looking for Nutanix on Azure solution for one of my customers and came across the Azure bare metal cost, I cannot see the Nutanix SKU on the Azure calculator and I want to capture the price for that with and without reservation. AN36P Config: 36 cores, 768 GiB Memory, 1.5 TB low-latency NVMe SSD, 19.2 TB NVMe SSD * is this cost managed and paid directly to Microsoft or through Nutanix ?

3
Moustafa Hindawi
3 months ago
P
Prafull_bansodeScout
asked in Nutanix Cloud Clusters (NC2)

Need help on migration of VMs from Nutanix to GCP cloud with SureEdge

Hi Team,We are trying to migrate the Nutanix VMs to GCP cloud. We came to know about the SureEdge tool supported by Nutanix. Currently, We are using community edition of Nutanix, can we get trial version of SureEdge  tool to test the migration of VMs. If there are any other tools supported, Please let us know. 

2
ktelep
Nutanix Employee
4 months ago
W
WalterMScottVoyager
asked in Nutanix Cloud Clusters (NC2)

vSphere 8 support - October

The last comment was that the support for vSphere 8 would be released in the next upgrade and that was four months ago. Can we get an update? We are telling customers they can’t migrate to 8 which is causing customers to look at other directions.

1
L
6 months ago
D
dazzaAdventurer
asked in Nutanix Cloud Clusters (NC2)

ESXi 8 Support

Hi. Is ESXi v8 supported yet?

1
sl.farhanparkar
7 months ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

NC2 Azure - Networking Flows between On-premises and Azure

Prism Central in Azure provides the control plane for Flow Virtual Networking. The subnet for Prism Central is delegated to Microsoft.BareMetal/AzureHostedService, so you can use native Azure networking to distribute IP addresses for Prism Central.Once you deploy Prism Central, the Flow Virtual Networking Gateway (FGW) VM deploys into the same VNet that Prism Central uses. The FGW allows communication between the guest VMs using the VPCs and the native Azure services. Using the FGW, guest VMs have parity with native Azure VMs for elements such as:User-defined routes: You can create custom or user-defined (static) routes in Azure to override Azure’s default system routes or to add routes to a subnet’s route table. In Azure, you create a route table, then associate the route table to zero or more virtual network subnets. Load balancer deployment: You can balance services offered by guest VMs with the Azure-native load balancer. Network security groups: You can write stateful firewall pol

1
Kcmount
8 months ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

Azure Networking Just Got A Little Easier with AOS 6.7 - Flow Gatway HA Deep Dive

Flow Virtual Networking Gateway VM High Availability When you initially deploy your first cluster, you can create two to four FGW VMs vs only one prior. The resiliency change is a big deal but getting traffic in and out of the cluster became a lot easier for Azure/Nutanix admins. The addition of the Azure Route servers along with the deployment of BGP VMS means that User Defined routes don’t need to be created. Anytime manual operations can be removed from a design, it means a win for the customer.Prior to AOS 6.7, if you deployed only one gateway VM, the NC2 portal redeployed a new FGW VM with an identical configuration when it detected that the original VM was down. Because this process invoked various Azure APIs, it took about 5 minutes before the new FGW VM was ready to forward traffic, which affected the north-south traffic flow.To reduce this downtime, NC2 on Azure uses an active-active configuration. This setup provides a flexible scale-out configuration when you need more traff

0
dlink7
8 months ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

NC2 on AWS - Greater Native Control Over Your Environment With Custom Security Groups

AOS 6.7 has added more options for securing your cluster in AWS. We will take a look at the existing options and dive into the new feaure in AOS 6.7.You can use AWS security groups and network access control lists to secure your cluster relative to other AWS or on-premises resources. Nutanix automatically creates three security groups to limit traffic to the cluster:Internal management: Allows all internal traffic between all CVMs and all AHV hosts (EC2 bare-metal hosts). Don’t edit this group without approval from Nutanix Support. User management: Allows users to access Prism Element and some other services running on the CVM. UVM: Allows UVMs to talk to each other. By default, all UVMs on all subnets can talk to each other, but you can edit the policy to lock down more traffic. You could alternatively use Flow Network Security to prevent east-west traffic.  With AWS security groups, you can limit access to the AWS CVMs, AHV host, and UVMs only from your on-premises management network

0
dlink7
8 months ago
S
s001441Scout
asked in Nutanix Cloud Clusters (NC2)

unable to complete ncc health check

We are experiencing issues with the "ncc health_checks run_all" command on the Nutanix CVM machine, both from Putty and the web console. The checks are failing or aborting after waiting for more than 30 minutes. Your assistance in resolving this matter would be greatly appreciated. Thank you.

3
Moustafa Hindawi
8 months ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

Traffic Flow in Azure extended to a private datacenter with a Layer 2 stretched Network

Hybrid Cloud extended network between Azure and private datacenterThis is just one possible scenario that you could use create a Layer 2 stretch network in your hybrid cloud environment. The goal is to understand this scenario and to have a place to ask questions. The plan is to introduce additional scenarios to drive understanding. This scenario is using AOS 6.6. The scenario will mostly likely change with newer AOS releases. We have an Azure environment on the top the below diagram and private datacenter below the Azure environment.  We want to understand what happens if the VMs running on Nutanix in Azure failback/migration to the private datacenter while using layer 2 stretch. After the failover, how will the native Azure VMs in Step 4 reach the VMs that failed/migrated. The VMs running the NC2 cluster in Azure are using a routed path to get access. The means we have ability to route on-prem an native Azures services to the VMs running on the NC2 cluster. Step 1 – L2We have a setup

0
dlink7
8 months ago
Bhaskarbhatt
BhaskarbhattScout
asked in Nutanix Cloud Clusters (NC2)

Enable VM console without revealing cluster credentials: how-to guidance needed

We are team of developers working on the hosting platform based on the nutanix cluster  and getting issue with the enable console on new VM without disclosing cluster credentials ?

4
JeroenTielen
9 months ago
JeroenTielen
JeroenTielenVanguard
posted in Nutanix Cloud Clusters (NC2)

Nutanix on OVHcloud

Ever wondered how to setup a Nutanix cluster on OVHcloud? Here is a blogpost that would probably tick all boxes with questions: https://www.jeroentielen.nl/running-nutanix-on-ovhcloud/  

1
BartDonders
9 months ago
R
RennyLui_2Explorer
asked in Nutanix Cloud Clusters (NC2)

vSphere 8.0 support

Hi! I would like to find out whether there is any timeline to support vSphere 8.0 for NX G8 nodes?

2
sl.farhanparkar
11 months ago
H
hhigginsVoyager
asked in Nutanix Cloud Clusters (NC2)

Storage Container Recommendation

Hi,New to Nutanix. Setting up our new Nutanix cluster that will run VMware as the hypervisor. Is it recommended to create 1 storage container that utilizes all storage capacity for all VMs (150) to reside? I am use to creating multiple datastores in a traditional 3 tier architecture, but i know a lot of those practices go away with hyperconverged.The main reason I ask is that although we have no plans at this point to use other Nutanix services such as Files or Database, I don’t want to be in a position if I create a storage container for VMware VM’s and assign it all of the capacity and then find out later that I cannot use Nutanix Files because all space was initially given to VMware.Any recommendations or best practices you can share to ensure I don’t shoot myself in the foot?Thanks  

3
Moustafa Hindawi
1 year ago
H
HarishankarVoyager
posted in Nutanix Cloud Clusters (NC2)

How i can apply exam preparation process ?

How i can apply exam preparation process ?nutranix certificate 

3
Moustafa Hindawi
1 year ago
R
Rajeshkumar1504Adventurer
asked in Nutanix Cloud Clusters (NC2)

NC2 on Azure , Add Cloud account

Hello Everyone,I am trying to deploy NC2 on azure but , I need to Add cloud account .Everytime I gave all the correct information of azure like, Directory ID , Subscription ID, Application ID, and secret value it gave error “Azure credentials are not valid.” How to resolve it .Please Help.Best Regards ,Rajesh Kumar

3
dlink7
1 year ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

Don't Control the Network? No Problem. Nutanix Native DR Encryption to The Rescue

 Stop the Man in the Middle Attacks.Whether you're replicating to the cloud or to a remote branch site you may not control the networking stack and to end. When you don't control the networking stack end to end or you're in an environment that simply doesn't have a firewall you can use Nutanix Native DR encryption between your Nutanix clusters.  The feature is fully supported for both PD and Nutanix DR(PC) based replication.Changes will persistent after reboots of the CVMs and upon upgrades.AOS needs to be on 6.1 or higher.DR with Encryption will use 14119,14108 as additional ports that need to open bi-directional when all of the CVMS. *** Note you need to run the below steps on each cluster.To enable this featureSSH to the CVM Change the folder to bin - all the python commands need to ran from the bin directory  cd bin Run the script. For PD based Replication  python onwire_encryption_tool.py --enable <remote_cluster_vip> For PC/Nutanix DR Replication  Enure your Prism Centrals

1
bbbburns
Nutanix Employee
1 year ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

New Hibernate demo

when you play to many video games as a child Check out this new hibernate video for AWS.  

4
bbbburns
Nutanix Employee
1 year ago
T
Teko YasinAdventurer
asked in Nutanix Cloud Clusters (NC2)

How to Size a new Nutanix cluster from VMWare to Nutanix

Hello All, I'm working with a customer on a new solution designthe customer has a VMware workload and we plan to put AHV,I want you to advise me on how I calculate the storage requirement, Let’s say the customer workload is about 170 TB how do i size the cluster storage Also, I have some questions related to storage sizesif I have 3 nodes clustereach node with 10 disks each disk 4 TB (numbers for examples only)that means total raw storage is 120 TBwe will go with RF2 which means 1 node is out of our usable capacity calculation So what is the usable capacity here after the 1 node for failure and the Raid used in the cluster creation, also what else should be conducted from the storage in storage planning?

8
qamarabbas
1 year ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

Flow Gateway VM in Azure - Everything you need to know.

The Flow Gateway VM (FGW) for Nutanix Cloud Clusters In Azure(NC2) is the Lynch pin to having a your own Supercloud. The FGW is responsible for all VM traffic going north and south from the Nutanix cluster in Azure. This virtual machine allows outside communication from both cloud and on-premises services to the workloads running on the Azure NC2 Cluster.   The Flow Gateway VM connecting Azure and on-prem services to the Nutanix Cluster deployed in Azure.Once Prism Central is automatically deployed from the cluster creation process, the FGW deploys into the same VNET that Prism Central is using.  The FGW is a native Azure VM. The VM has two network interface cards(NICs) attached to it, one for internal traffic and one for external traffic. The external NIC  where the floating IP's are configured for workloads that may need away outside clients connecting into running workloads on the cluster. The default installation will configure 50 floating IP's on the external NIC. These floating I

0
dlink7
1 year ago
dlink7
dlink7Moderator
posted in Nutanix Cloud Clusters (NC2)

Azure Networking – Picking the right path.

One of the biggest changes with Nutanix Cloud Clusters (NC2) on Azure compared to it's AWS counterpart is the requirement for Flow virtual networking. Flow virtual networking provides an overlay in Azure to provide secure communication between multiple tenants you may be hosting on the Nutanix cluster and also provides north and southbound connectivity. North and southbound connectivity is provided through the Flow gateway virtual machine (FVGW). Workloads running on the cluster can either go through a network address translation (NAT) path or a routed path not using a NAT. Which path your virtual machines take in and out of the NC2 Cluster will depend on how other services need to talk to the running virtual machines on NC2.The FVGW Is a native Azure VM that gets deployed when the first cluster is created. The FVGM has both and internal and external network interface cards(NIC). Traffic from your Azure Nutanix cluster is directed towards the FVGM’s Internal NIC And then eventually rou

0
dlink7
1 year ago
N
Nirmal2802Explorer
asked in Nutanix Cloud Clusters (NC2)

VDI having login issue 10061 socket error

when we login VDI  getting socket 10061 error it is new VDi. 

3
qamarabbas
1 year ago
S
skeeterTrailblazer
asked in Nutanix Cloud Clusters (NC2)

Managed Network across clusters

Hello All,        I have added a managed network in our cluster. We have since purchased another cluster and in the process of configuring VXLan and the ability to live migrate VM’s between clusters. From what I have been seeing we cannot have a managed network across clusters is this correct? If not does anyone know how to configure a managed network to work between clusters.Thanks,Scott

7
dlink7
1 year ago

Badges

Show all badges
Terms & Conditions