Events
Product Updates

Stressed About Managing Multiple Clouds? We've Got Your Back!

11 days ago

Community
Nutanix Cloud Infrastructure
AHV Virtualization

AHV Virtualization

License-Free Virtualization for Your Enterprise

507 Topics
1,686 Replies

When you subscribe we will email you when there is a new topic in this category

507 Topics

Recently active

Most replies Most views Newest first

kondasani ashokTrailblazer

asked in AHV Virtualization

vms are not pinging in the nutanix cluster, the network is the same range

Recently i have Expanded the cluster with two node and i have created two vms in the same network range but two vms are not reachable in the Nutanix cluster please help me anyone.

7 months ago

AmrrlshqrrAdventurer

asked in AHV Virtualization

AD User unable to access VM console on Prism Central

AD user is having trouble accessing the VM console on Prism Central. They can log on normally to Prism Central. After clicking the VM, only a blank page with the name of the VM appears instead of the console. There is no "FAIL" status after the health check that I ran. Additionally, I verified that RBAC allows users to access the VM console.After PC was updated to version pc.2022.6.0.3 with LMC 2.5.x, PE software was upgraded on AOS 6.5.2.5, and AHV 20220304.342, and this problem appeared. Is there a chance that this problem can be resolved?

7 months ago

gael01Trailblazer

asked in AHV Virtualization

Sysprep behaviour with/without Prism Central guest customization option

Hello I'm currently working on a Windows Server 2022 image these days, and something got weird on the 3 below scenarios1) From PC - deploying a new VM from image by specifiying guest customization with only username and password Sysprep seems to works but logs are quite short 2) From PC - using a unattend.xml in the guest customization settings that only change username/password Same result as you can see below 3) Manually from inside the VM, launching sysprep.exe /generalize /reboot /oobe Logs are very long (file is like 145ko vs 5ko for 1) and 2) and a lot more stuff seems to be done rather than 1) and 2) , as you can see below My questions are :Does the guest customization from PC is really working ? what should be the best way to sysprep a VM from PC ? Thanks a lot for your help :)

7 months ago

FabriceLTrailblazer

asked in AHV Virtualization

Ansible - missing arguments

I have the same issue described in https://next.nutanix.com/discussion-forum-14/ansible-missing-aruments-41627This post have 10 replies but I can’t see them.To test, I have written values of nutanix_host, nutanix_password, nutanix_username are directly in dem playbook. No way. What is the solution ?thanx a lot

7 months ago

slavjaniVoyager

asked in AHV Virtualization

BOOT configuration CMDLET for VM creation

Hello comunity, i need info if these cmdlets are updated or there is new cmdlets for booting configuration?i am preparing boot configuration for deploying VM with UEFI and SATA combination but those cmdlets are not working for me. I am using latest cmdlets downloaded directly from the Prism Element.$boot=New-NutanixObject BootConfig$boot.uefi_boot=$true$boot.secure_boot=$false$boot.boot_device_type='DISK'$boot.disk_address=$diskAddressThose line are throwing errors…Thanks and regards

8 months ago

babaouVoyager

asked in AHV Virtualization

Compatibility Nvidia AOS/AHV

Hello everybody, We have a customer who informs us about a problem on his AOS/AHV platform:We have encountered in our testing phase several Nvidia problems on the Linux stations:- Name of the VDI does not show up in the license server; Unrecognized driver causing the GPU not to be used. Nvidia advised to upgrade to version 13.7.But the version supported by nutanix for the client version is 13.3, the one already in place (https://portal.nutanix.com/page/downloads?product=ahv) The current versions of the client : AOS: 6.5.1.6AHV: 20220304.24Nvidia grid : 470.129.04nvidia software : 13.3 Can we upgrade from nvidia to version 13.7?Is it supported by nutanix? Thanks for your help Bernard

8 months ago

cyril_bWayfarer

asked in AHV Virtualization

Deploy VM on Nutanix AHV with Satellite

Hello,Is there a way to deploy Linux Server on Nutanix AHV with RedHat Satellite? I can’t add compute resource in Infrastructure/Compute Resources in Satellite GUI I opened a case on RedHat side and they told me :“The RFE (Request for feature enhancement) has been raised with respect to Bugzilla #2010211, however, the Red Hat Satellite Engineering team has confirmed that this RFE will not be implemented.”Does anyone succeeded to deploy VM On Nutanix with Satellite ?I’m not talking about virt-who, this part is working.

8 months ago

gael01Trailblazer

asked in AHV Virtualization

How to properly deal with UEFI and Windows Server 2022 ?

HiAs Microsoft advise / Windows Server 2022 isn’t Legacy BIOS compatible anymore, i have to set up a brand new template using UEFI.However, if i tick “EFI” and Secure Boot from VM configuration or not, I can’t boot on my ISO at all. It still go to EFI Shell or in the UEFI Menu.I also tried to update VirtIO drivers directly into my Windows image (on install.wim and boot.wim on all indexes) but i can’t go so far in the installation part. Does anyone was able to use EFI settings with Windows Server 2022 ? If yes, what was your settings ?

8 months ago

HyunLynExplorer

asked in AHV Virtualization

Can Not poweron GuestVM

I have installed CE 2.0 on top of Esxi Environment. I have created new guest VM. While powering on I am getting the following Error.libvirtError: the CPU is incompatible with host CPU: Host CPU does not provide required features: monitorany have idea?im running on amd epyc cpu

8 months ago

Jae HoExplorer

asked in AHV Virtualization

Kuldeep@Trailblazer

asked in AHV Virtualization

installation of AHV on Virtual Desktop

is any possiblity to install AHV on Virtual Desktop ? l want to install on VMware Workstation, VirtualBox etc.

8 months ago

ARTDEMTrailblazer

asked in AHV Virtualization

Upgrade cluster from 5.20 to 6.5.2 using LCM

Greetings all,Testing out an upgrades I have faced some problems upgrading cluster from 5.20 straight to 6.5.2 AOS version using dark site web server. Even though the Upgrade Path shows that such upgrade is supported, and I was able to upgrade all the other components including the AOS itself using Prism LCM. The only problem is that after Performing Inventory and even after the upgrade complete it does not show AHV version changed or the upgrade available and the AHV version stays the same. I have tried to perform Direct Upload too and even though I could see the uploaded AHV version I still was unable to upgrade it. Upgrade to 6.5.1.8 version went successful, however. So I had to try it with 6.5.2.5 and the result stays the same as with 6.5.2First I tried to upgrade fromAOS 5.20.1.1 AHV 20201105.2096 → AOS 6.5.2 AHV 20220304.342then after reimaging the cluster toAOS 5.20.2.1 AHV 20201105.2244 → AOS 6.5.2 AHV 20220304.342.Both upgrades showed same results, then after reimaging the c

9 months ago

Didi7Trailblazer

asked in AHV Virtualization

Windows Server 2008 SP2 x64 Virtualization with AHV ...

Hello guys, I managed to create a new VM running Windows Server 2008 SP2 x64 with the help of the Fedora Redhat VirtIO drivers. Everything works fine so far. Question now ... has anbody managed to get the current Nutanix Guest Tools to run inside? I downloaded SHA-2 Microsoft Patches KB4474419 and KB4493730 for Windows Server 2008 x64, installed them and rebooted but the installation of Nutanix Guest Tools still fails. Any ideas? Thanks

9 months ago

YenAdventurer

asked in AHV Virtualization

How to create different vSwitch for VM traffic?

How to create a new vSwitch in AHV to separate the VM traffic to go thru different physical nics?Example, CVM on default vSwitch on eth0, VM traffic on vSwitch on eth1?Also I need to configure LACP on the connection.Thanks. Anthony Yen.

9 months ago

rb559Voyager

asked in AHV Virtualization

ESXI 7.0 nested VM on AHV NIC Issues

I have need to stand up an ESXi nested VM for running a Singlewire Informacast VM that refuses to run on AHV natively. Following some blogs/guides, I’ve manually created a NIC with the e1000 model and it seems to work fine under ESXi 6.7 but the ESXi 7.0 installer won’t recognize the NIC. From what I’ve seen online, the e1000 driver might not be supported on ESXi 7.0 anymore.In any case, I wanted to see if anyone else has had any luck getting ESXi 7.0 working as a nested VM on AHV. Thanks.

9 months ago

AmineBiExplorer

asked in AHV Virtualization

VM power action event logs

Hello,Is there any way that we can monitor a particular VM activity - log file from Nutanix and forward it to the Syslog server.

9 months ago

AdelMareiAdventurer

asked in AHV Virtualization

Non impacted services

Hello,I have been searching for KB(s) that show the services we can restart without an impact on the cluster (wither a single node or more) such as genesis stop cluster_health in KB 13150, do we have such information that we can use without the need to open a case with support? BR

9 months ago

Bruno_BrustolinExplorer

asked in AHV Virtualization

Launch VM Authentication

Hello,We have a scenario where we need to grant access to console VM's to some users without this users have access to prism. Do you know if exist some way that bypass authentication to launch console VM? Maybe a API call that I can pass this authentication in a code, for example? I know that in url vm, I can inform the uuid of VM's the access works, but I need grant access without directly logon on prism Thanks

9 months ago

Larry99Voyager

asked in AHV Virtualization

ubuntu 22.04 cloud images (img or ova)

For installing a Ubuntu Server Cloud image is it still required to customize it to add the serial port as described in a 2-year old article in this forum for installing Ubuntu Server Cloud. Also do Ubuntu Server 22.04 OVA images work or must use .img? See: Ubuntu 22.04 (Jammy Jellyfish) [20230107]

9 months ago

Daniel LoVoyager

asked in AHV Virtualization

AOS installation failed with error "Failed to register internal hypervisor"

Hi All,I am installing Nutanix AOS into Fujitsu RX2540 M5 node via foundation 5.3.3. But the installation failed with dependencies not met and Failed to register internal hypervisor. Any suggestion?===============================================================2022-12-30 18:47:18,205Z DEBUG Setting state of <ImagingStepValidation(<NodeConfig(192.168.100.34) @cb90>) @bc90> from PENDING to RUNNING2022-12-30 18:47:18,210Z INFO Running <ImagingStepValidation(<NodeConfig(192.168.100.34) @cb90>) @bc90>2022-12-30 18:47:18,213Z DEBUG Cache MISS: key(<function common_validations at 0x7fc52aae17d0>_()_{'global_config': <foundation.config_manager.GlobalConfig object at 0x7fc528086cd0>})2022-12-30 18:47:18,214Z INFO Running redundancy factor validations2022-12-30 18:47:18,216Z INFO Validating parameters. This may take few minutes2022-12-30 18:47:18,217Z INFO Running validations to ensure non-duplicacy of hostnames2022-12-30 18:47:18,218Z INFO Running hypervisor

10 months ago

Shaun.SparksExplorer

asked in AHV Virtualization

Alert on resilient capacity of a cluster

There is an option to have the Storage widget turn yellow when the cluster reached a warning threshold of resilient capacity. This feature does not appear to trigger an alert in Prism Elements. Are there any options to make this trigger an alert or are there options to alert on the resilient capacity of the cluster? Managing the capacity based on anything else creates more management overhead when each cluster has to have the capacity calculated individually and the thresholds set/reset with cluster changes. Since this widget is already doing the calculation it seems redundant to have to edit the storage pool alerts on every cluster. This is an example of the Storage Widget with the warning triggered. But the storage pool has not triggered an alert based on these numbers because it doesn’t take into consideration the resilient capacity.

10 months ago

TimothyGrayVoyager

asked in AHV Virtualization

VMs power on after Cluster power outage

When a cluster goes down due to a power failure, the VMs power back up when the hosts come back online. Is there any way to control this and create a boot order for those VMs?

10 months ago

Page 5 / 21

Badges

Harmeet Singhhas earned the badge Courteous
ElGéhas earned the badge Courteous
Rob_WJhas earned the badge Neighborly
ktelephas earned the badge Qualified
pierredoucethas earned the badge User Group Champion

Show all badges

Terms & Conditions

Sign up

Already have an account? Login

Login to the community

Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.

Username or e-mail

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.