Deployment Success

Tools and Technologies

2788 Topics

Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

New KB Articles Published on Week Ending January 20, 2024

Below are new knowledge base articles published on the week of January 14-20, 2024.KB 15854 - NDB - Stuck operations after resolving connectivity issues with clusterNote: You may need to log in to the Support Portal to view some of these articles.

0
Albert Mendoza
Nutanix Employee
3 months ago
Eric-The_Viking
Eric-The_VikingTrendsetter
asked in Installation & Configuration

NGT tools install on Sangoma Linux - actually Centos

Hi AllI have a Sangoma SBC VM installation but for the NICs it shows 1 MBps unknown.  Connection seems to work but I am worried about the actual speed if they only use 1mbps I have tried to install NGT on the linux base but it fails with incompatible OS : Sangoma LinuxI am not really a Linux bod so not sure what I need to do to get the NGT drivers on to th SBC - can anyone assist with some idiot style instructions to do this? ThanksEric

0
Eric-The_Viking
5 days ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

Top KB Articles for April 2024

Below are the top knowledge base articles for the month of April 2024.KB 1540 - AOS Only - What to do when /home partition or /home/nutanix directory on a Controller VM (CVM) is full KB 6082 - inode_usage_check fails due to large amount of email files in /var/spool/postfix/maildrop directory KB 1532 - NCC Health Check: inode_usage_check KB 7503 - NX Hardware [Memory] - DIMM Error handling and replacement policy KB 1113 - HDD, SSD, and HBA troubleshooting KB 6945 - How Upgrades Work at Nutanix KB 8453 - Alert - A1044 - PathOffline KB 3827 - Alert - A130087 - Node Degraded KB 8885 - Alert - A15039 - IPMI SEL UECC Check KB 5228 - NCC Health Check: pcvm_disk_usage_check KB 2090 - AHV host networking KB 4409 - LCM: Life Cycle Manager Troubleshooting Guide KB 8094 - NCC Health Check: disk_status_check KB 2473 - NCC Health Check: cvm_memory_usage_check KB 8514 - NCC Health Check: fs_inconsistency_check KB 3786 - Alert - A1081 - CuratorScanFailure KB 3716 - Reclaiming licenses and cluster deco

0
Albert Mendoza
Nutanix Employee
23 hours ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

New KB Articles Published on Week Ending April 13, 2024

Below are new knowledge base articles published on the week of April 7-13, 2024.KB 15210 - Nutanix Files: REST API user creation fails for AD user with "Request failed with status code 500" KB 16052 - AAG DB provision might fail if Active Directory Sites and Services configuration is inaccurate KB 16205 - Networking: Nutanix AOS and Juniper QFX Configuration Considerations KB 16457 - Nutanix Files : Rubrik backups for Nutanix distributed shares may fail due to DNS misconfiguration KB 16488 - Nutanix Move | File share migration to Nutanix Files Distributed Shares does not copy individual files present on the root of the source share KB 16499 - DR | Replication of vTPM-enabled VMs may fail after enabling DR Network Segmentation KB 16503 - Unable to power on Memory Overcommit enabled VMs KB 16511 - OpenShift compact cluster installation fails on top of Nutanix KB 16526 - Configuration Steps for Entra ID (formerly Azure ADFS) Integration with Prism CentralNote: You may need to log in to th

0
Albert Mendoza
Nutanix Employee
21 days ago
V
vsachinVoyager
asked in Installation & Configuration

LLDP inforation via Prism Central or Preism Element REST API

Hello,I would like to get information of physical switch ports connected to virtual switch uplink ports via REST API. I don’t see API for the same in Prism Central v3 or Prism Element v2. I see the connectivity in Prism Element Network topology GUI. Appreciate if you could share how to retrieve this information.Thanks,Sachin Vishwarupe

0
V
20 days ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

New KB Articles Published on Week Ending May 4, 2024

Below are new knowledge base articles published on the week of April 28-May 4, 2024.KB 15570 - Alert - A300442 - RecoveryPlanFailedToReleaseAssignedIpFromProtectedVM KB 16156 - Unable to update Distributed vSwitch due to orphaned VM KB 16409 - 3rd party snapshot fails when network segment is enabled with the error "INTERNAL ERROR" KB 16422 - NDB - Remove Database server VM fails at 0% with "Operation failure detected. Execution ended abruptly without updating status." KB 16521 - NGT - NGT Upgrade or Installation fails with "InternalException" KB 16727 - Redeploying Mine Dashboard fails with "Permissions change to reverse_proxy_script failed" KB 16735 - No response for echo (ping) request to AHV hosts(s) with active-backup bond mode on BCM57416 NIC KB 16757 - Alert - A130148 - ProtectionDomainSnapshotDelayed KB 16759 - Enabling the Administration feature (Single Account Role Based Access Control) KB 16762 - Common Objects/MSP commandsNote: You may need to log in to the Support Portal to

0
Albert Mendoza
Nutanix Employee
23 hours ago
A
albertogVoyager
asked in How It works

Nutanix Files List of delete files in the last 1 hour by REST API

Hi, I want to get an audit list of deleted files and user that deleted it in the last hour using REST API. I dont find this api in the doc? can anyone point me to this api documentation?

0
A
3 months ago
D
DaniKaLWayfarer
posted in How It works

Seeking successful data transfer insights between Nutanix and Remedy for integration

hi. i was wondering if anyone here has managed to successfully transfer data between nutanix and remedy? i have a case that requires the integration. since i’m way behind my schedule, i would really appreciate any opinion, solution, point of view. 

0
D
2 years ago
S
SorenDKExplorer
asked in Installation & Configuration

Unattended installation of Prism Central

Is there anyone who have made a unattended installation of Prism Central - That would like to share how… Best regardsSøren

0
S
8 hours ago
M
MatanPVoyager
asked in Installation & Configuration

Show only the Manual PD Snapshot

Hello,I have a customer that want to find only the PD snapshots was taken manually.also he asked me how can he change the default retention for the manual snapshots for two weeks?I didn't find nothing in the documents, and i need some help.Thanks in advanced,Regards,Matan.  

2
M
13 hours ago
C
chadgiardinaOutrider
asked in How It works

Error in ipv4config.py: Unable to fetch KVM device configuration, ret 1

nutanix ERROR ipv4config.py:1811 Unable to get the KVM device configuration, ret 1, stdout , stderr br0-backplane: error fetching interface information: Device not found\n Anyone know what to do with this error.  I turned on remote syslogging to see why a host has been crashing and I see this as one of the errors in the logs.  The host is a Dell PE R630.Not sure if KVM means the host OS, since AHV basically is KVM or an actually connecting to iDRAC for Keyboard Mouse Video.  

0
C
1 year ago
G
GuilhermeCITExplorer
asked in Sizer Configuration Estimator

Client couldn't run collector app; sent log error after unsuccessful call

A client was not able to run the collector app during a call. After the call he send me the following log error: 2024-02-26T13:23:55.866Z info: CONFIG_PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\ntnx_config.json2024-02-26T13:23:55.873Z info: PROTO PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\resources\app.asar\build/../protos/collector.proto2024-02-26T13:24:01.530Z info: Something went wrong while deleting app data,Error: 14 UNAVAILABLE: No connection established. Last error: connect ECONNREFUSED 127.0.0.1:50051 (2024-02-26T13:24:01.507Z)2024-02-26T13:27:38.651Z info: CONFIG_PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\ntnx_config.json2024-02-26T13:27:38.656Z info: PROTO PATH:,D:\Downloads\Nutanix\Nutanix-Collector-5.0-win\resources\app.asar\build/../protos/collector.proto Can someone please help me? Thanks

0
G
2 months ago
B
BrianRobinsonScout
asked in How It works

Removing failed node Error: Cannot mark node for removal. Node xx (xx.xx.xx.xx) is to be added back to metadata store

So I was wondering what Akbor actually did here.  In the reply he says he just, “This is now resolved, I used edit-zeus to set state.”Is there a set of instructions or some sort of helpful advice for what he meant by edit-zeus?  I tried poking around but it seemed pretty dangerous for a linux noob like myself LoL Thanks for any help you can give,                                                        Brian  Removing failed node 2 months ago 1 reply 52 views Hi everyone,We had an issue with SATADOM on of the nodes, which has been replaced.  Unfortunately, we had to rebuild the CVM as well as they hypervisor and now need to add the rebuilt node back to the cluster.  The problem is we can’t remove the existing node as we are getting the following error:Error: Cannot mark node for removal. Node xx (xx.xx.xx.xx) is to be added back to metadata storeDoes anyone know how we can overcome this error?P.S. we don’t have Nutanix support coverage anymore.Many thanks in advance.Akbor 

0
B
3 days ago

Badges

Show all badges
Terms & Conditions