Skip to main content

AHV Virtualization

Webscale Virtualization for the Enterprise

  • 637 Topics
  • 2,060 Replies
637 Topics
K
kondasani ashokTrailblazer
asked in AHV Virtualization
Dependence issue coming while doing the node imaging

Hi, I am going to deploy with three node cluster and while doing the node imaging getting dependence issue can any one help me.

1
Peter Seidl
1 year ago
N
Nishant1992Trailblazer
posted in AHV Virtualization
What is ICAP and integration with Nutanix files

ICAP stands for internet content adaption protocol is an open standard being adopted to connect devices to enterprise-level virus scan engine . same way with the nutanix files is to enable communication with external servers hosting third-party anti-virus software to scan inbound data (files) in transit via Secure Proxy before sending it to the backend destination server.ICAP WORKFLOWThe ICAP service runs on each Nutanix Files file server and can interact with more than one ICAP server in parallel to support horizontal scale-out of the antivirus server. The scale-out nature of Files and one-click optimization greatly mitigate any antivirus scanning performance overhead. If the scanning affects Nutanix Files FSVM performance, one-click optimization recommends either increasing the virtual CPU resources or scaling out the FSVMs. This feature also helps both the ICAP server and Files scale out, ensuring fast responses from the customer’s antivirus vendor WHY Nutanix files integration with

0
N
1 year ago
N
Nishant1992Trailblazer
posted in AHV Virtualization
Change Nutanix AHV NIC From access Mode to Trunked Mode

Trunked Mode allows multiple VLANs on a single NIC for VMs that are VLAN aware.by default, NIC cards are in access mode.mode can't be changed from the UI (Prism) and the solution is to update from CVM acliyou can also covert exiting NIC card to Trunked Mode however based on my experience best and easy way is to add a new cardStepsSSH CVM acli <acropolis> vm.get VMNAME copy information in notepad nutanix@CVM~$ acli vm.nic_create <vm name> network=<network name> trunked_networks=<comma separated list of allowed VLAN IDs> vlan_mode=kTrunked example:-vm.nic_create VT-LAB-1 network=NETWORK0 trunked_networks=2021,2022 vlan_mode=kTrunkedWHY Trunked is Required Above Setting is required when the virtual machine needs to create multiple networks on a single interface. in my case it's WAF devices that are configured for multiple VLANs, each VLAN is associated with a different kind of applicationif you want to add more VLANs run the belowvm.nic_update TT-WAF-01 00:68:8

0
N
1 year ago
N
Nishant1992Trailblazer
posted in AHV Virtualization
Cross Hypervisor Disaster recovery ESXi To AHV or AHV to ESXi

Cross hypervisor disaster recovery (CHDR) provides the ability to migrate the VMs from onehypervisor to another (ESXi to AHV or AHV to ESXi) by using the protection domain semanticsof protecting VMs, generating snapshots, replicating the snapshots, and then recovering theVMs from the snapshotsKey notes install and configure NGT on all the VMs When you recover VMs from the AHV hypervisor on the ESXi hypervisor, the VMs come up with E1000 NIC attached by default. However, if you want to bring the VMs up withVMXNET NIC is attached, you must install VMware Tools Static IP address preservation is not supported for CHDR workflows. If a VM has an astatic IP address configured, you must manually reconfigure the VM IP address after its recovery on the target site. Hypervisor-specific properties like multi-writer flags, independent persistent and independent non-persistent disks, or changed block tracking (CBT) is not preserved in the CHDR operation RequirementsNutanix supports only VMs with

0
N
1 year ago
N
Nishant1992Trailblazer
posted in AHV Virtualization
change nutanix move ip address after deployment

ssh nutanix move admin@move on ~ $ rs enter password root@move on ~ $ configure-static-ip Enter the required information as shown in the following example. Do you want to configure static IPv4 address?(y/N)yEnter Static IPv4 Address (e.g. 10.136.97.98)10.136.7.1Enter Netmask (e.g. 255.255.255.0)255.255.255.0Enter Gateway IP Address (e.g. 10.136.97.1)10.136.72.1Enter DNS Server 1 IP Address (e.g. 10.136.74.189)10.136.72.189Enter DNS Server 2 IP Address (e.g. 10.136.74.190)10.136.72.190Enter Domain (e.g. blr.ste.lab)bltr.ste.lab  retry the failed replication

0
N
1 year ago
N
Nicholas-McQuillingWayfarer
asked in AHV Virtualization
Nutanix Datastore Online and Accessible. Unable to Mount to ESXI

We are running a Nutanix environment with 3 CVM nodes (A,B,C) on 3 separate ESXI hosts (7.0 Update 3) with 3 IPMI configurations using vCLS. Originally, Node A failed during an FSM upgrade and was unable to talk correctly to our Houston Datastore (MCQ-HOU). In doing so, there was no snapshot and we were unable to roll it back. We were currently in the midst of attempting to create a new node on the same ESXI host (.204) through Nutanix Prism but when searching for any existing or accessible hosts it does not find any of them and we are unable to create a new one. We attempted to shut down the cluster, unmount the Datastore on the broken node and re-mount it once we were able to clone a functioning node and change the configuration. In doing so, we are now unable to mount the datastore with the following commands and were presented with an error:esxcli storage nfs remove -v 192.168.5.2:MCQ-Hou Unmountesxcli storage nfs add -H MCQ-Hou -v MCQ-Hou -s 192.168.5.2 MountPlease see the VMkerne

1
JeroenTielen
1 year ago
I
ivan.topalovVoyager
asked in AHV Virtualization
Nutanix AHV Max Cluster

Hi guys, i need imformation about max nodes per cluster for one of our implementation.I cant find any official information for max cluster size.Thanks

9
A
1 year ago
K
kondasani ashokTrailblazer
asked in AHV Virtualization
vms are not pinging in the nutanix cluster, the network is the same range

Recently i have Expanded the cluster with two node and i have created two vms in the same network range but two vms are not reachable in the Nutanix cluster please help me anyone.

3
K
1 year ago
A
AmrrlshqrrAdventurer
asked in AHV Virtualization
AD User unable to access VM console on Prism Central

AD user is having trouble accessing the VM console on Prism Central. They can log on normally to Prism Central. After clicking the VM, only a blank page with the name of the VM appears instead of the console. There is no "FAIL" status after the health check that I ran. Additionally, I verified that RBAC allows users to access the VM console.After PC was updated to version pc.2022.6.0.3 with LMC 2.5.x, PE software was upgraded on AOS 6.5.2.5, and AHV 20220304.342, and this problem appeared. Is there a chance that this problem can be resolved?

2
A
1 year ago
F
FabriceLAdventurer
asked in AHV Virtualization
How deploy VM from PrismCentral template with Ansible Nutanix module

I have just installed the module Nutanix for Ansible. The demo playbook works fine.https://www.nutanix.dev/2022/08/05/getting-started-with-the-nutanix-ansible-module/But I can’t find in the module documentation how to deploy VM  from a VM template just like we do with https://docs.ansible.com/ansible/latest/collections/community/vmware/vmware_guest_module.html ?Thx

1
JoseNutanix
Nutanix Employee
1 year ago
G
gael01Trailblazer
asked in AHV Virtualization
Sysprep behaviour with/without Prism Central guest customization option

Hello I'm currently working on a Windows Server 2022 image these days, and something got weird on the 3 below scenarios1) From PC - deploying a new VM from image by specifiying guest customization with only username and password Sysprep seems to works but logs are quite short 2) From PC - using a unattend.xml in the guest customization settings that only change username/password Same result as you can see below 3) Manually from inside the VM, launching sysprep.exe /generalize /reboot /oobe Logs are very long (file is like 145ko vs 5ko for 1) and 2) and a lot more stuff seems to be done rather than 1) and 2) , as you can see below My questions are :Does the guest customization from PC is really working ? what should be the best way to sysprep a VM from PC ?  Thanks a lot for your help :) 

0
G
1 year ago
F
FabriceLAdventurer
asked in AHV Virtualization
Ansible - missing arguments

 I have the same issue described in https://next.nutanix.com/discussion-forum-14/ansible-missing-aruments-41627This post have 10 replies but I can’t see them.To test,  I have written values of nutanix_host, nutanix_password, nutanix_username are directly in dem playbook. No way. What is the solution ?thanx a lot

4
F
1 year ago
S
slavjaniVoyager
asked in AHV Virtualization
BOOT configuration CMDLET for VM creation

Hello comunity, i need info if these cmdlets are updated or there is new cmdlets for booting configuration?i am preparing boot configuration for deploying VM with UEFI and SATA combination but those cmdlets are not working for me. I am using latest cmdlets downloaded directly from the Prism Element.$boot=New-NutanixObject BootConfig$boot.uefi_boot=$true$boot.secure_boot=$false$boot.boot_device_type='DISK'$boot.disk_address=$diskAddressThose line are throwing errors…Thanks and regards

0
S
1 year ago
B
babaouVoyager
asked in AHV Virtualization
Compatibility Nvidia AOS/AHV

Hello everybody, We have a customer who informs us about a problem on his AOS/AHV platform:We have encountered in our testing phase several Nvidia problems on the Linux stations:-    Name of the VDI does not show up in the license server;    Unrecognized driver causing the GPU not to be used. Nvidia advised to upgrade to version 13.7.But the version supported by nutanix for the client version is 13.3, the one already in place (https://portal.nutanix.com/page/downloads?product=ahv) The current versions of the client : AOS: 6.5.1.6AHV: 20220304.24Nvidia grid : 470.129.04nvidia software : 13.3 Can we upgrade from nvidia to version 13.7?Is it supported by nutanix? Thanks for your help Bernard

4
F
1 year ago
C
cyril_bWayfarer
asked in AHV Virtualization
Deploy VM on Nutanix AHV with Satellite

Hello,Is there a way to deploy Linux Server on Nutanix AHV with RedHat Satellite? I can’t add compute resource in Infrastructure/Compute Resources in Satellite GUI I opened a case on RedHat side and they told me :“The RFE (Request for feature enhancement) has been raised with respect to Bugzilla #2010211, however, the Red Hat Satellite Engineering team has confirmed that this RFE will not be implemented.”Does anyone succeeded to deploy VM On Nutanix with Satellite ?I’m not talking about virt-who, this part is working. 

0
C
1 year ago
G
gael01Trailblazer
asked in AHV Virtualization
How to properly deal with UEFI and Windows Server 2022 ?

HiAs Microsoft advise / Windows Server 2022 isn’t Legacy BIOS compatible anymore, i have to set up a brand new template using UEFI.However, if i tick “EFI” and Secure Boot from VM configuration or not, I can’t boot on my ISO at all. It still go to EFI Shell or in the UEFI Menu.I also tried to update VirtIO drivers directly into my Windows image (on install.wim and boot.wim on all indexes) but i can’t go so far in the installation part. Does anyone was able to use EFI settings with Windows Server 2022 ? If yes, what was your settings  ? 

4
G
1 year ago
H
HyunLynExplorer
asked in AHV Virtualization
Can Not poweron GuestVM

I have installed CE 2.0 on top of Esxi Environment.  I have created new guest VM. While powering on I am getting the following Error.libvirtError: the CPU is incompatible with host CPU: Host CPU does not provide required features: monitorany have idea?im running on amd epyc cpu

0
H
1 year ago
J
Jae HoExplorer
asked in AHV Virtualization
Problem after ssd expansion

I added ssd to the Nutanix cluster, but the tier looks hdd. How can I fix it?

0
J
1 year ago
C
ChaidongVoyager
asked in AHV Virtualization
Integrate 2 tenant network

We have 2 Nutanix prism tenants and would like to share the VM resources to keep the logs such as the SNMP logs and Syslog together, Our local services suggest having 2 public IPs to connect it with the VPN tunnel.  Is it possible to configure the virtual network for this solution without the Public IP?I’m not sure it is the best practice to connect 2 local tenants with the VPN tunnel so the packet will route through the public network.

4
C
1 year ago
M
mansoorl1997Wayfarer
asked in AHV Virtualization
IDLE SERVERS

if We have 400 virtual machines and we dont know that who use that virtual machines and we want to know IDLE SERVERS, means the servers no one use. 

1
Moustafa Hindawi
1 year ago
K
Nutanix Employee
Kundan KNutanix Employee
asked in AHV Virtualization
How to get Metrics for applications/services running in a VM on Nutanix?

Hello guys, I am aware of the application discovery and monitoring feature that comes with prism pro to get the metrics for apps running inside vms. But currently it offers support for only vcenter and mssql server. Is there any other way from nutanix or any third party software that can be leveraged to achieve this?  

0
K
Nutanix Employee
1 year ago
K
Kuldeep@Trailblazer
asked in AHV Virtualization
installation of AHV on Virtual Desktop

is any possiblity to install AHV on Virtual Desktop ? l want to install on VMware Workstation, VirtualBox etc.

3
Moustafa Hindawi
1 year ago
A
ARTDEMTrailblazer
asked in AHV Virtualization
Upgrade cluster from 5.20 to 6.5.2 using LCM

Greetings all,Testing out an upgrades I have faced some problems upgrading cluster from 5.20 straight to 6.5.2 AOS version using dark site web server. Even though the Upgrade Path shows that such upgrade is supported, and I was able to upgrade all the other components including the AOS itself using Prism LCM. The only problem is that after Performing Inventory and even after the upgrade complete it does not show AHV version changed or the upgrade available and the AHV version stays the same. I have tried to perform Direct Upload too and even though I could see the uploaded AHV version I still was unable to upgrade it. Upgrade to 6.5.1.8 version went successful, however. So  I had to try it with 6.5.2.5 and the result stays the same as with 6.5.2First I tried to upgrade fromAOS 5.20.1.1 AHV 20201105.2096 → AOS 6.5.2 AHV 20220304.342then after reimaging the cluster toAOS 5.20.2.1 AHV 20201105.2244 →  AOS 6.5.2 AHV 20220304.342.Both upgrades showed same results, then after reimaging the c

14
A
1 year ago
D
Didi7Trailblazer
asked in AHV Virtualization
Windows Server 2008 SP2 x64 Virtualization with AHV ...

Hello guys, I managed to create a new VM running Windows Server 2008 SP2 x64 with the help of the Fedora Redhat VirtIO drivers. Everything works fine so far. Question now ... has anbody managed to get the current Nutanix Guest Tools to run inside? I downloaded SHA-2 Microsoft Patches KB4474419 and KB4493730 for Windows Server 2008 x64, installed them and rebooted but the installation of Nutanix Guest Tools still fails. Any ideas? Thanks

0
D
1 year ago
Y
YenAdventurer
asked in AHV Virtualization
How to create different vSwitch for VM traffic?

How to create a new vSwitch in AHV to separate the VM traffic to go thru different physical nics?Example, CVM on default vSwitch on eth0, VM traffic on vSwitch on eth1?Also I need to configure LACP on the connection.Thanks. Anthony Yen.

4
Peter Seidl
1 year ago

Badges

  • Courteous
    DylanHhas earned the badge Courteous
  • Neighborly
    Exehas earned the badge Neighborly
  • Courteous
    Madhu CHhas earned the badge Courteous
  • Courteous
    dchiacchiohas earned the badge Courteous
  • Courteous
    Exehas earned the badge Courteous
Show all badges
Terms & Conditions