Volumes Block Storage | Nutanix Community
Skip to main content

Volumes Block Storage

Scale-Out Volumes Block Storage Built for the Acropolis OS

  • 9 Topics
  • 16 Replies
9 Topics
A
AhmadMhdAdventurer
asked in Volumes Block Storage
Integrate Nutanix with Veritas netbackup via different VLAN (Network Segmentation)

We have a cluster with 3 nodes, we have configured multiple bridges for different networks, we isolated the NTNX cluster management traffic on specific VLAN and the Backplane traffic on another VLAN as well, we have a backup network with two different dedicated links on a different VLAN.This backup network which the Veritas NetBackup software is in, and as far as I know it supports Nutniax clusters backup via a plugin, the backup host in our setup is on a different VLAN on a different bridge, so it's isolated from Nutanix cluster management and cluster VIP.What is the best way to get the backup solution working with the mentioned setup, is there a way to expose the Nutanix API and allow access for that VLAN on dedicated bridge via different IP? or we have to configure network segmentation for KVolumns service? and if so, what the recommended way to route the traffic between the CVMs and the backup network bridge?Thanks

944
A
3 months ago
S
SZKchanVoyager
asked in Volumes Block Storage
About Consolidated Storage Services license

Hello folks,There is a requirement to configure Oracle RAC in a Nutanix environment.The hypervisor will be used with AHV, and license it plan to use is NCI Starter.It appears to be possible to implement this by using the Nutanix Volumes functionality to reference the Shared Disk as an iSCS target to the internal Guest OS.In the past, there was no cost for internal use with Nutanix Volumes, but now with the new license format, will an additional NUS license be required? Or is a separate NUS license not required for internal use?https://www.nutanix.com/products/cloud-platform/software-optionsFrom this link, it looks like that's not necessary.. Thank you

482
S
5 months ago
J
JudasaniAdventurer
asked in Volumes Block Storage
No more CVM after disk remove

Hello team,Always in learning Nutanix that’s totally new for me, I performed some tests today. One of those was to remove a disk to check if system will still be up. And… no :)All the CVM is crashed because it don’t find the removed disk.I have a Nutanix CE with a single node cluster. Is Nutanix storage pool not working as a RAID (1 or 5?) by default? Is there something to configure? Coming from VMWare, I make the comparison. On my ESXi I can lost one disk as I’m protected by the RAID-5 of the Raid-controller. Should I also use a RAID-5 for Nutanix? I read that disk must be in RAID-0 and Nutanix will protect it. How protect my single node cluster from a single disk failure?I certainly misunderstand or misconfigure something. Thanks for you help ! PS: The disk I removed was not one of those declared for the CVM during the installation, it’s a “Data” disk. 

861
JeroenTielen
5 months ago
V
VaibhavtiwariVoyager
asked in Volumes Block Storage
external storage connectivity

Hi Team, I am new to Nutanix and I am learning the product. Like VMware supports adding external storage systems via iSCSI / FC and we can create datastore. Nutanix does not support external storage connection via iSCSI or FC, am I right? The only option is add local disks on the AHV server… Is there any roadmap when the external storage connectivity will be allowed?

27132
Moustafa Hindawi
8 months ago
V
VaibhavtiwariVoyager
asked in Volumes Block Storage
add additional hdd

Hi All, I have deployed one node cluster and it is running well.I would like to additional HDD of 500GBI added the 500 GB drive on the AHV node however how do I add it on the consoleany suggestion… thanks

772
V
8 months ago
M
McFarland JohnsonPathfinder
asked in Volumes Block Storage
ISCSI Storage Question

I have a program that is requiring us to use a “local disk” for a storage path and throws an error if I try to use a mapped drive such as “S” … this program is published on (2) Windows Server VMs My thinking to resolve this is - Create a new ISCSI Volume in the Nutanix, Then grant access to BOTH of the Windows VMs via ISCSI so that drive shows up as a local ISCSI device on both of the servers. My Question for you is, does Nutanix support me connecting 2 machines at the same time to the same ISCSI Volume?   Thank You

961
JeroenTielen
11 months ago
M
MasumVoyager
asked in Volumes Block Storage
NX-8235N-G8-CM - Initial Configuration

Hello,We recently purchased 2 x NX-8235N-G8-CM (total of 4 nodes), which will be explicitly used as storage servers.I am having some trouble performing the initial configuration and wondering if I could get some support as I am stuck. This would be my first time setting up a Nutanix device and not sure where to begin.I did try to use the Nutanix Foundation, but no luck while trying to follow what was done here: I do have few questions regarding Foundation though.What I did:Plug in the new devices’s IPMI/data port to a dummy switch (IPMI/HOST IP will be on same subnet) Plug in my laptop with a prod IP address (i.e. 10.8.1.0.24) to switch Launch Nutanix Foundation for Windows Follow what was done in the above videos with my IP addressesNote: I am not running any DHCP nor did I set any static IP for IPMI/AHV/CVM. I read that AHV is already installed for devices sold in the US; however, not sure if the CVM is already installed though. The setup process does ask for manual entries for IPMI/

22573
qamarabbas
1 year ago
K
KaiKOScout
asked in Volumes Block Storage
Can I get free trial for Volumes?

Hi All,We want to try some situation for POC,so we need to enable Volumes.Maybe have some try trial of us?Thank you.

911
Moustafa Hindawi
2 years ago
R
Nutanix Employee
raajiNutanix Employee
posted in Volumes Block Storage
Configuration for Volumes (vDisks)

In a traditional three-tier architecture, application and database administrators often work with storage administrators to create a custom storage design to suit their environment, which includes designating the RAID level and block size for different types of files, such as database tablespaces or log files. This process can become cumbersome to manage, especially if there are multiple databases. Nutanix eliminates the problems associated with choosing the optimal RAID and block size. Once you create a VG with the required number of vDisks for your database or application, you’re ready to deploy. The following table outlines the recommended minimum disk layout for a database such as Oracle. For other workloads please refer to the specific application’s best practices guide.There are two ways to create vDisks on Nutanix for your VMs: Nutanix native vDisks. Nutanix volume groups. Nutanix Native vDisksThe Nutanix native vDisk option simplifies VM administration because it doesn’t requ

11410
R
Nutanix Employee
2 years ago

Badges

Show all badges
Terms & Conditions