5 Essential Tips for Maximizing Your Experience at Nutanix .NEXT for Bloggers
The nuxtnaix server 3451 uses two Intel Network cards 82599eb . This card has only 10000 Gbit full duplex option in GUI and on command line. Does this mean, the cisco swith has to be configured also 10000 Gbit full fuplex and not autonegotiate? http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 On the other side when autonegotiation is disabled option are lost. http://etherealmind.com/ethernet-autonegotiation-works-why-how-standard-should-be-set/ Disabling autonegotiation can result in physical links issues going undetected. The Fast Link Pule process does some testing for the physical link properties as well as negotiation on several Ethernet properties. [list] [*]Unable to detect bad cables [*]Unable to detect link failures [*]Unable to check link partners capabilities [*]Unable to move systems from one port to another or to another switch or router [*]Unable to determine performance issues on higher layer applications [*]Una
On this blog someone shows 18 Gigabit per 10 seconds, so only 1,8 Gigabits per seconds? http://blog.cyberexplorer.me/2013/03/improving-vm-to-vm-network-throughput.html
If you do iperf tests then open two putty sessions on the esxi host and do ethtool -S vmnic0. I see that the rx_missed counters go up. Flow Controll is not enabled. Used the standard vswitch with esxi 5.0 U3 After I enabled flow controll on the cisco switch, rx_missed counter is 0.
FLow control on? 10000 full duplex or auto auto on the cisco switch ? Mtu=9216
WHat about MTU? Good Infos : http://kendrickcoleman.com/index.php/Tech-Blog/vsphere-and-vcloud-host-10gb-nic-design-with-ucs-a-more.html 2 x 10 Gigabit Configuration http://www.kendrickcoleman.com/images/stories/onetime/vcd-hostnic/vCD-Host-2x10GbE.png
So my upgrade from esxi 5.0 U3 to esxi 5.5 did work different like johnsonclaires guide 1 + 2 like described 3.) for i in `hostips`; do echo $i && ssh root@$i "esxcli software vib install -d /FILEPATH TO OFFLINE BUNDLE"; done 4.) like described 5.) Set host in maintaince mode 6.) Reboot esxi server 7.) After reboot reconnect esxi server 8.) CVM is listed as unkown and unkown1 vm. The local nfs datastore is not available 9.) Read on the Nutanix Operation Guide 3.5 and fixed it 10.) ls -ld /altbootbank/Nutanix /altbootbank/svmboot.tar.gzIf /altbootbank/Nutanix or /altbootbank/svmboot.tar.gzexist, move it to /bootbank. Otherwise,proceed to the next step.mv /altbootbank/Nutanix /bootbankmv /altbootbank/svmboot.tar.gz /bootbankc. Remove the pynfs VIB.excli software vib remove -n pynfs -f -> nothing happen (Seems to be only valid for 5.1 and 5.5 , not 5.0)Save the host configuration./sbin/auto-backup.sh Kown this is the import part which brings the local nfs datastore back Configure the loc
Perfect another Guide http://wkennedy.co/nutanix/nutanix-esxi-upgrade-51-to-55/
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.