Hi guys,
trying to image 3 nodes with hyper-v 2012 R2 using foundation but 1st and 3rd node fails at 4% and 2nd node completes with 100% success.
I am losing my patience :(
Need some help.
Thanks
Fatal:Running (4%)
This topic has been closed for comments
![Milestone Badge](https://uploads-us-west-2.insided.com/nutanix-us/attachment/a341eba9-61ee-4e65-8fe9-c08e0a25a359_thumb.png)
I am using Foundation VM 3.1 release and nutanix_installer_package-release-danube-4.5.1.2-stable.tar.gz
Model is 3060
Model is 3060
Have you taken a look t the foundation logs? Past that, please open up a support ticket on portal.nutanix.com and we'll help you troubleshoot
Hi Mudasir,
I face the same problem. It solved by resetting IPMI configuration to factory default on the affected node. I also connected IPMI port to the switch and delete all file on /tmp on Foundation. It works for me
Regards
Budi
I face the same problem. It solved by resetting IPMI configuration to factory default on the affected node. I also connected IPMI port to the switch and delete all file on /tmp on Foundation. It works for me
Regards
Budi
![Milestone Badge](https://uploads-us-west-2.insided.com/nutanix-us/attachment/a341eba9-61ee-4e65-8fe9-c08e0a25a359_thumb.png)
Hi Bezeddin,
Thanks for your reply, for me also after resetting to factory default it worked.
regards,
Mudassir
Thanks for your reply, for me also after resetting to factory default it worked.
regards,
Mudassir
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.