Replace all drives on nutanix cluster | Nutanix Community
Skip to main content

Hello,

I have a hybrid cluster (3 nodes) with 2x1,9TB SSDs and 10x4TB NL-SAS drives. Is it possible to replace all the disk in the cluster to make it all-flash?

What would be the procedure?

Thanks!!

It is possible, a client that I have requested that change ... design a work plan with the steps ... however I strongly recommend opening a case with support ... Nothing is better than having a validation by support. Officially there is no procedure. But it is possible.

Please involve the Hardware Vendor to confirm if the procedure is possible on the Platform concerned and the configuration is approved before proceeding.

An additional consideration in a mixed cluster is to verify the number of All Flash nodes as there is a minimum requirement.
 

Procedure:

1. Remove the Node from Cluster using steps mentioned in Prism Web Console Guide.

2. Once Node removal completes, Shutdown the Node.

3. Replace all HDD with SSDs in the node physically.

4. ReImage the Node using Foundation with AOS and Hypervisor Version of the cluster its going to be added to using Field Installation Guide.

5. Once Imaging completes, follow Cluster Expansion procedure using Prism Web Console Guide.