Skip to main content

Communication error on calm deployment

  • 24 November 2019
  • 18 replies
  • 4065 views

Hi,

 

I was successful on setting up prism central on the community edition all working good.

Further i extended the cluster capability by enabling Calm. I am able to access the calm UI and see all the functions available. As a next step i tried to deploy hycu blueprint from market place also tried to deploy one VM from my on disk image. Both get failed with below error. Please help.

 

HTTPConnectionPool(host='172.16.xx.xx', port=4120): Max retries exceeded with url: /api/1/entities/get_by_name?name=Application-hycu--74b677a5-5cd9-4c49-9cb4-196e2d5e3be4 (Caused by ProtocolError('Connection aborted.', BadStatusLine("''",))) 

 

Regards,

Aravind

This topic has been closed for comments

18 replies

C
Rank
Userlevel 1

Hey Arvind, 

Looks like containers are not up on the PC.

  1. SSH into PC
  2. Run command - docker ps
  3.  epsilon container must be up and healthy
  4. If epsilon is not running, check the logs /home/nutanix/data/logs/epsilon.out

 

Regards,

Charan teja

A
Badge

Hi Charan,

 

Thanks for the reply!!!

I see the epsilon service up and running.

aa6214b712a2        epsilon:latest       "/bin/sh -c /home/..."   42 minutes ago      Up 39 minutes (healthy)                       epsilon

 

Regards,

Aravind

A
Badge

This time i am getting some different error.

Creating VM with name: EgAgentVM

ERROR: VM Creation failed at the AHV due to the following reasons: 
ERROR MESSAGE: 48c5230a-25cd-46ea-8b6b-7ea19e31c56f does not exist.
REASON: INVALID_REQUEST
ERROR DETAILS: <nil>

ERROR: No ergon task created for VM Create operation

C
Rank
Userlevel 1

Hey,

 

Ok the request reached epsilon. I guess epsilon was down for some time. The new error is because you did not select image when running the Eg VM.  There is a market place guide on portal.nutanix.com that explains.

 

Regards,

Charan teja

A
Badge

Hi Charan,

 

Even after selecting the image(win2016) end up with same error.

 

-Aravind

C
Rank
Userlevel 1

Hey Arvind,

 

Can you attach screen shots ? I would recommend raising a SFDC case so that a SRE can check and fix the issue

 

 

A
Badge

Still the same issue. Should i check any configurations or log files for details?

 

 

C
Rank
Userlevel 1

Hey,

 

From the PC tasks, it will show why VM creation failed. Also /home/nutanix/data/logs/aplos.out and /home/nutanix/data/logs/aplos_engine.out will show the Error logs why provisioning failed.

A
Badge

Got these error logs.

 

2019-12-10 14:45:53 UWSGI 127.0.0.1 [POST]:/v3/vms issued by: admin took 11863 msecs, response status: 422
2019-12-10 14:46:07 INFO remote_requests.py:805 Remote call [POST]:https://172.16.140.67:9440/api/nutanix/v3/remote_rpc_request?service_name=nutanix.insights.uploader.InsightsReceiverRpcSvc&port=2028&base_url=/rpc&timeout_ms=60000 , 0.03, 403
2019-12-10 14:46:07 WARNING remote_requests.py:303 Retry with all IPs failed. Passing up the error message from the remote cluster: [(u'172.16.140.67', 9440), (u'172.16.140.65', 9440)]
2019-12-10 14:46:07 WARNING remote_requests.py:247 Remote request call returned not OK with 127c7a4c-5f96-52fb-ad17-64d2958dd32d POST https://172.16.140.67:9440/api/nutanix/v3/remote_rpc_request?service_name=nutanix.insights.uploader.InsightsReceiverRpcSvc&port=2028&base_url=/rpc&timeout_ms=60000 403 {"state": "ERROR", "code": 403, "message_list": [{"reason": "ACCESS_DENIED", "message": "No permission to access the resource."}], "api_version": "3.1"}
2019-12-10 14:46:07 INFO remote_requests.py:805 Remote call [POST]:https://172.16.140.71:9440/api/nutanix/v3/remote_rpc_request?service_name=nutanix.insights.uploader.InsightsReceiverRpcSvc&port=2028&base_url=/rpc&timeout_ms=60000 , 0.04, 200
2019-12-10 14:46:07 ERROR fanout_proxy_api.py:66  Fanout proxy api returns: 403
 

C
Rank
Userlevel 1

Hey Aravind,

 

Looks like PC-PE communication is having issue. 

 

A
Badge

I am able to ping succefully from PC to PE. 

 

admin@NTNX-172-16-140-70-A-CVM:~$ ping 172.16.140.69 -- Prism Element
PING 172.16.140.69 (172.16.140.69) 56(84) bytes of data.
64 bytes from 172.16.140.69: icmp_seq=1 ttl=64 time=0.511 ms
64 bytes from 172.16.140.69: icmp_seq=2 ttl=64 time=0.375 ms
64 bytes from 172.16.140.69: icmp_seq=3 ttl=64 time=0.334 ms

admin@NTNX-172-16-140-70-A-CVM:~$ ping 172.16.140.71 -- Prism Cluster IP
PING 172.16.140.71 (172.16.140.71) 56(84) bytes of data.
64 bytes from 172.16.140.71: icmp_seq=1 ttl=64 time=0.868 ms
64 bytes from 172.16.140.71: icmp_seq=2 ttl=64 time=0.377 ms
 

 

S
Rank
Badge

Hi Aravind,

Can you perform the following from the PC VM:

# nc -vvv 172.16.140.67 9440
# nc -vvv 172.16.140.65 9440
# nuclei remote_connection.list_all

On the PE cluster, run the below command and share it with us:

# ncli cluster info

A
Badge

Hi 

Note: I am running the community edition on VMware VM.

I confirmed the PE and PC IP's in my env as below:

172.16.140.69 -- Prism Element(CVM)
172.16.140.71 -- Cluster Virtual IP address
172.16.140.70 -- Prism Central

I ran the commands as you suggested. The screenshots are below:

 

On PC:-

 

On PE:-

 

172.16.140.67(PE, CVM) and  172.16.140.65(ClusterIP) are another clusters IP’s which was previously registered with this PC. I had to reinstall this cluster for some reason. Hence currently this Cluster is not registered with PC.

 

​​​​​​​-Aravind

A
Badge

I checked the API access from PC to PE as well by listing the cluster details.

 

A
Badge

Hi Stalin/Charan,

 

Can you guys please help me here with some leads to troubleshoot.

 

-Aravind

R

Hi,

 

I was successful on setting up prism central on the community edition all working good.

Further i extended the cluster capability by enabling Calm. I am able to access the calm UI and see all the functions available. As a next step i tried to deploy hycu blueprint from market place also tried to deploy one VM from my on disk image. Both get failed with below error. Please help.

 

HTTPConnectionPool(host='172.16.xx.xx', port=4120): Max retries exceeded with url: /api/1/entities/get_by_name?name=Application-hycu--74b677a5-5cd9-4c49-9cb4-196e2d5e3be4 (Caused by ProtocolError('Connection aborted.', BadStatusLine("''",))) 

 

Regards,

Aravind

Hi ,

can you please help how to deploy prism central on the community edition.

sandeepmp
Rank
Userlevel 4
Badge +19

@Aravindcs Are you able to deploy new vms using this image from Prism Central? [directly from prism central and not from calm]

A
Badge

Hi,

 

I was successful on setting up prism central on the community edition all working good.

Further i extended the cluster capability by enabling Calm. I am able to access the calm UI and see all the functions available. As a next step i tried to deploy hycu blueprint from market place also tried to deploy one VM from my on disk image. Both get failed with below error. Please help.

 

HTTPConnectionPool(host='172.16.xx.xx', port=4120): Max retries exceeded with url: /api/1/entities/get_by_name?name=Application-hycu--74b677a5-5cd9-4c49-9cb4-196e2d5e3be4 (Caused by ProtocolError('Connection aborted.', BadStatusLine("''",))) 

 

Regards,

Aravind

Hi ,

can you please help how to deploy prism central on the community edition.

 

I followed multiple docs. The below url’s helped me lot. There is one youtube video available as well.

https://next.nutanix.com/discussion-forum-14/prism-central-not-booting-27300

https://next.nutanix.com/discussion-forum-14/prism-central-nested-esxi-6-7-31972

 

Terms & Conditions