Deployment Success

Tools and Technologies

2780 Topics

J
Jens AndersenAdventurer
asked in Installation & Configuration

Certificate errors in fresh installation

Hi again.So i did my fresh installation, and at long last the password worked.Now, i can access the https://ip-of-cvm:9440, but only using “Internet Explorer”Any other browser will say something like this:“IP” usually uses encryption to protect your information. This time when Microsoft Edge tried to connect to “IP“, the site returned unusual and incorrect credentials. This can happen when a hacker tries to impersonate “IP” or a Wi-Fi login screen has disconnected. Your information is still safe because Microsoft Edge disconnected before any data was exchanged.You can't visit “IP” right now because the site has sent encrypted credentials that Microsoft Edge can't process. Network failures and attacks are usually temporary, so this page will probably work again later. And using “Internet Explorer” it seems like a lot of virual elements arent displayed correctly.

3
Kcmount
7 hours ago
J
Jens AndersenAdventurer
asked in Installation & Configuration

First installatino of community edition

Hi.So this is my first installation of Nutanix, and it is kicking my behind.I have done the installation, and i want to connect to the CVM, but it doesent accept the default password.https://portal.nutanix.com/page/documents/details?targetId=Nutanix-Clusters-AWS:aws-clusters-aws-using-prism-element-web-console-log-in-t.htmlI have tried root, admin nutanix and password “nutanix/4u” “Nutanix/4u”. So, what is the default password when SSH the first time to the CVM? Best RegardsJens.

5
J
8 hours ago
M
Marc infonecsVoyager
asked in Installation & Configuration

All licenses reset before clean re-allocation on two production clusters

Hi Guys,Can anyone confirm that it is possible to unlicense one or two NX clusters that are in production in order to re-allocate the same licenses but smarter?Explanation: We have 2 clusters with 3 AOS Pro licenses sets (Cores + FLASH)Set1: first 3 nodes of cluster1 (2019, renewed 2022)Set2: first 3 nodes of cluster2 (2021, renewed 2024)Set3: 2 more nodes, one for each cluster (2022)We should then have set1 allocated for cluster1, set2 for cluster2 and set3 split between the 2 clusters but currently each set is used partially in cluster1 and 2 which is a mess for next licenses renewal…So my target would be to reclaim all the licenses for both clusters and then reallocate them, cleaner,  through seamless licencing. Is that scenario possible without stopping the exploitation? Thanks for your advice and guidance.

2
M
20 hours ago
D
DrubeusScout
asked in How It works

UEFI VMs encounter random "inaccessible boot device" BSOD issue

Just wondering if anyone knows if there are any documented instances of someone being able to successfully re-inject the VirtIO drivers into a UEFI-based Windows VM?  At first, we thought it was just a VMware problem, but then we had the same issue happen on a native-AHV VM.  The VM operates normally for weeks, with regular reboots, but randomly after a reboot, it bluescreens with an "Inaccessible Boot Device" error.We haven't found a single "solution" that has actually fixed the problem.  We can get the VM to boot into recovery mode, but none of the recovery options work.  If we manually load up VirtIO driver from the command prompt (drvload vioscsi.inf) we can regain access to our drives, but adding the driver to the boot image via DISM does not help (dism /image:c:\ /add-driver /driver:vioscsi.inf).  The server reboots to the same blue screen.SFC doesn't help, neither do the standard bootrec options (i.e. bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd), nor does "bootsec /nt

2
Matt M
1 day ago
C
ChawinAdventurer
asked in How It works

Can I extend node G9 into cluster G5?

Hello Guys I have a plan to refreshment nutanix from G5 to G8 or G9but I have a question. Can I add node G8 or G9 to cluster G5?So that I can migrate VMs completely before upgrading. Please, someone with experience, please advise me.Thank you 

1
B
1 day ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

New KB Articles Published on Week Ending April 20, 2024

Below are new knowledge base articles published on the week of April 14-20, 2024.KB 15818 - Expand cluster pre-check: test_nci_low_endurance_check KB 16490 - Cluster intermittently reports lack of Rack Fault Tolerance KB 16516 - NDB - Troubleshooting Windows AG Cluster Provisioning Failures KB 16541 - Witness VM password reset KB 16544 - kubectl top error: metrics not available yet KB 16545 - How to enable CoreDNS query logging? KB 16547 - Adding Calico Route Reflectors to a DKP cluster KB 16548 - Configuring the Dex LDAP connector with TLS KB 16551 - No data displaying for certain users in Grafana KB 16554 - Default Jobs missing from Prometheus after applying overrides KB 16555 - Deploying Kubernetes cluster with DKP capa controller gets stuck due to credentials issues KB 16556 - Traefik Forward Auth error: No such host KB 16557 - UNAUTHORIZED: project not found error while pushing images to Harbor Registry KB 16558 - Failure to upgrade DKP 2.6: Machine failed to resolve secret refere

0
Albert Mendoza
Nutanix Employee
1 day ago
T
ThomasMTrailblazer
asked in Move Application Migration

Migration of MS Exchange Server from ESXi to AHV via move

Hi,how do you think about migration of a single MS Exchange Server incl. its database via Move?I know that is not recommended but there are some technical facts for?In the past I’ve migrated a lot of MS SQL servers via Move without problems (migration offline while vm was powered off - virtio drivers were installed in a previous step).kind regards,Thomas 

4
T
3 days ago
N
NicolasHFRScout
asked in Installation & Configuration

Best approach to monitor Nutanix cluster with ELK ?

Hello, We have a couple of Nutanix clusters (with or without Prism) and we would like to monitor them from ELK. What would be the best ? Is there a KB on how to setup a web service collector ? ThanksNicolasHFR

1
J
4 days ago
Ahmed_Elyacoubi
Ahmed_ElyacoubiExplorer
asked in How It works

Get efficiency state for VMs using API

Is there a way to fetch the efficiency state for VMs (Bully, Over Provisioned, Constrained, Inactive VM, Good) using API requests?"

1
G
4 days ago
S
simonphAdventurer
asked in X-Ray Performance & Reliability Tests

Replace default SSL certificates

Hello, Is it possible to replace the default SSL certificate of the X-Ray “appliance”, I didn’t find a procedure for that ? Thank you in advance (hoping this is the correct place to get help on this)PhS

6
S
4 days ago
K
kwan.ho.chan
asked in Installation & Configuration

Complete newbie not sure how to get to the config screen

Hi all the expert,I’m completely new to Nutanix.I tried to install the Nutanix Community Edition onto my existing rack mounted HPE ProLiant DL380 Gen9 server, so I followed this YouTube video, but it’s definitely outdated, since the links shown on the video are different to the download links available from the post from 3 years ago (created on 29th September 2020) So I have downloaded the installer ISO (version ce/2023.03.01/phoenix-ce2.0-fraser-6.5.2-stable-fnd-5.3.4-x86_64.iso) and nothing else, since the other download links are for Windows, but my purpose is to install Nutanix itself onto the host directly to replace ESXi completely, so I thought the VirtIO for Windows ISO and AHV Plugin (.msi files) are not really applicable in my case.So it get stuck at the getting files screen for a long time, and then it errored out as the screenshot at the bottom, then a root login line showed up, I can’t even get to the grey screen to select the hypervisor and configure the IP like on the Ge

0
K
6 days ago
N
Nur AkbarAdventurer
asked in Installation & Configuration

SSH to cvm is not working but it shows running on ahv

Hellocan anybody help me..[root@XXX~]# virsh list --all | grep CVM 1     NTNX-XXX-CVM          running[root@XXX~]# ping 192.168.5.254PING 192.168.5.254 (192.168.5.254) 56(84) bytes of data.From 192.168.5.1 icmp_seq=1 Destination Host Unreachable^C--- 192.168.5.254 ping statistics ---4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3081mspipe 4[root@XXX ~]# ssh nutanix@192.168.5.2FIPS mode initializedssh: connect to host 192.168.5.2 port 22: No route to host how to repair cvm ?

6
T
7 days ago
Gurdeep Sandhu
Gurdeep SandhuAdventurer
asked in Installation & Configuration

Nutanix CE installs but CVM does not create cluster in vmware nested environment.

Hi,I successfully deployed three nodes as VMs in my VMware nested environment without any issues. All are pinging each other. CVMs are also pingable from each other.But when I create cluster from a CVM, cluster creation failed, medusa and its below listed services are having DOWN status. Please help.Regards,Gurdeep Sandhu 

9
mikkisse
7 days ago
V
vsachinVoyager
asked in Installation & Configuration

LLDP inforation via Prism Central or Preism Element REST API

Hello,I would like to get information of physical switch ports connected to virtual switch uplink ports via REST API. I don’t see API for the same in Prism Central v3 or Prism Element v2. I see the connectivity in Prism Element Network topology GUI. Appreciate if you could share how to retrieve this information.Thanks,Sachin Vishwarupe

0
V
7 days ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

Top KB Articles for March 2024

Below are the top knowledge base articles for the month of March 2024.KB 6082 - inode_usage_check fails due to large amount of email files in /var/spool/postfix/maildrop directory KB 1532 - NCC Health Check: inode_usage_check KB 1540 - AOS Only - What to do when /home partition or /home/nutanix directory on a Controller VM (CVM) is full KB 7503 - NX Hardware [Memory] - DIMM Error handling and replacement policy KB 1113 - HDD, SSD, and HBA troubleshooting KB 6945 - How Upgrades Work at Nutanix KB 8453 - Alert - A1044 - PathOffline KB 8885 - Alert - A15039 - IPMI SEL UECC Check KB 4409 - LCM: Life Cycle Manager Troubleshooting Guide KB 3827 - Alert - A130087 - Node Degraded KB 2090 - AHV host networking KB 5228 - NCC Health Check: pcvm_disk_usage_check KB 8094 - NCC Health Check: disk_status_check KB 8514 - NCC Health Check: fs_inconsistency_check KB 2473 - NCC Health Check: cvm_memory_usage_check KB 3786 - Alert - A1081 - CuratorScanFailure KB 6771 - Register for my.nutanix.com and Supp

0
Albert Mendoza
Nutanix Employee
8 days ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

New KB Articles Published on Week Ending April 13, 2024

Below are new knowledge base articles published on the week of April 7-13, 2024.KB 15210 - Nutanix Files: REST API user creation fails for AD user with "Request failed with status code 500" KB 16052 - AAG DB provision might fail if Active Directory Sites and Services configuration is inaccurate KB 16205 - Networking: Nutanix AOS and Juniper QFX Configuration Considerations KB 16457 - Nutanix Files : Rubrik backups for Nutanix distributed shares may fail due to DNS misconfiguration KB 16488 - Nutanix Move | File share migration to Nutanix Files Distributed Shares does not copy individual files present on the root of the source share KB 16499 - DR | Replication of vTPM-enabled VMs may fail after enabling DR Network Segmentation KB 16503 - Unable to power on Memory Overcommit enabled VMs KB 16511 - OpenShift compact cluster installation fails on top of Nutanix KB 16526 - Configuration Steps for Entra ID (formerly Azure ADFS) Integration with Prism CentralNote: You may need to log in to th

0
Albert Mendoza
Nutanix Employee
8 days ago
B
bereketsolomonAdventurer
asked in Installation & Configuration

Foundation Fatal Error

Hello FriendsHow are you? Currently i am trying to foundation A Nutanix 3 node environment but after the foundation process begins it will halt at “waiting for the installer to boot” stage with “fatal” error warning i don’t know what is causing the error can anyone tell me something.I have attached screenshots of errors and process. 

14
JeroenTielen
13 days ago
M
MouradbVoyager
asked in Installation & Configuration

Isseu installing Nutanix CE on CISCO servers

I was wondering if there are any requirements with regards to installing Nutanix on a CISCO C series hardware managed by an FI switch.I have enough CPU resources, Memory and storage.Ive set the local disk on a raid1 after the error on screenshot1, I went and removed all old partion on this raid (Old ESXi Installation) and even initialized and recreated the raid virtual drive after the error on screenshot1, I went and removed all old partion on this raid (Old ESXi Installation) and even initialized and recreated the raid virtual driveSecond screenshot if after the 2nd attempt to install on a newly created Raid 

3
ktelep
Nutanix Employee
13 days ago
M
MesserOrTrailblazer
asked in Installation & Configuration

VMDK's not booting with Kernel panic error.

I have an OVA which I usually deploy on VMWare. when extracting the vmdk’s from it I get two of them. I am booting using a legacy bios (because the UEFI version just hangs in “press f2 for boot manager”) from the current disk and I get the following error:  Can anyone please help in resolving this issue? Thank you.

9
JeroenTielen
14 days ago
G
GussyVoyager
asked in Installation & Configuration

Initial Setup of a Cluster

I have an old unused cluster that I would like to bring up as a test unit.  Is there any guide available on how do I go about setting this up?  Can’t call support as this is already EOL. Thanks!

2
G
18 days ago
P
PriyankaGupthaScout
asked in How It works

NCM SELF-SERVICE PLUG-IN FOR SERVICENOW Issue to connect

Hi all,I have installed and configured in servicenow, but when I launch the blueprint and catalog it does not go to nutanix application.  

0
P
19 days ago
R
ROHIT PAdventurer
asked in Installation & Configuration

Error in Installation of Android studio Emulator

Hi frnds,  Facing attached error while launching Emulator on VM. Please guide if anyone has installed and launched emulator.  

5
R
21 days ago
Z
zzfelixVoyager
asked in Installation & Configuration

Failed Installing AHV Nutanix CE on ProLiant DL380 Gen9

Hi,I am trying to install the Nutanix CE on Single Node HPE Server.But i got problem while installing Nutanix CE. Can anyone help with this error?HPE ProLiant DL380 Gen9Raid 0 (4 x 300GB disk)  

3
ktelep
Nutanix Employee
1 month ago
S
Sachith N B DAdventurer
asked in Sizer Configuration Estimator

Prism central loging

When attempting to log in to Prism Central for the first time, I encountered the following issues despite using the default Nutanix username and password.  

4
S
1 month ago
Albert Mendoza
Nutanix Employee
Albert MendozaNutanix Employee
posted in How It works

New KB Articles Published on Week Ending March 16, 2024

Below are new knowledge base articles published on the week of March 10-16, 2024.KB 14768 - Issue while downloading Cluster Summary File KB 15843 - NDB - Discovery Script to Collect Host and Oracle Database Configuration details KB 15916 - Alert - A130399, A130400 - FailoverTriggeredForDecoupledVM, FailoverTriggeredForDecoupledVG KB 16259 - Nutanix Files - List quota usage for files written by a user in a given share KB 16284 - LCM Inventory completes successfully but fails to show available XCC and UEFI version KB 16292 - OEM Platforms - Convert BIOS boot mode from Legacy to UEFI KB 16315 - Nutanix Central: Domain reports 403 ACCESS DENIED - No Permission to access the resource KB 16321 - How to use NGT Troubleshooter KB 16325 - File Analytics - Upgrade failed but restore successful KB 16333 - Nutanix Central: Domain reports 503 Service Unavailable KB 16339 - Uhura service crashes on Prism Central VM during security / port scans KB 16340 - Console not working for VMs running on ESXi 8

0
Albert Mendoza
Nutanix Employee
1 month ago

Badges

Show all badges
Terms & Conditions