Installation & Configuration

Welcome to the Nutanix NEXT community. To get started please read our short welcome post. Thanks!

cancel
Showing results for 
Search instead for 
Did you mean: 

Diagnostics VM Time to Deploy - 4.0.2.1

SOLVED Go to solution
Highlighted
Adventurer

Diagnostics VM Time to Deploy - 4.0.2.1

Good afternoon,

Can someone please sanity check something for me, one of the BEarena team is running a diagnostics test which is taking 7-8 minutes to deploy each diagnostics VM.

What is considered to be a normal amount of time?

At this rate the 8 node cluster will take over 1 hour to run diagnostics.

Thanks

Darryl

BEarena ruling the world, one node at a time!
Tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Nutanix Employee

Re: Diagnostics VM Time to Deploy - 4.0.2.1

I assume, from the day the op was created, that the diagnostics have run and finished...

However, for future reference, the KB linked above recommends:

 

1) The first one is to verify that ESX is configured correctly to look up against the correct DNS server.  
2) If resolution 1 is not possible, you can edit ssh_config file on the hypervisor to include the following line at the bottom:  
    useDNS no

4 REPLIES
Moderator

Re: Diagnostics VM Time to Deploy - 4.0.2.1

Check this article. It might be helpful to you.

 

https://portal.nutanix.com/#/page/kbs/details?targetId=kA0600000008cFQCAY

 

Hope it helps.

Adventurer

Re: Diagnostics VM Time to Deploy - 4.0.2.1

Doesn't seem to be loading?!

BEarena ruling the world, one node at a time!
Nutanix Employee

Re: Diagnostics VM Time to Deploy - 4.0.2.1

I assume, from the day the op was created, that the diagnostics have run and finished...

However, for future reference, the KB linked above recommends:

 

1) The first one is to verify that ESX is configured correctly to look up against the correct DNS server.  
2) If resolution 1 is not possible, you can edit ssh_config file on the hypervisor to include the following line at the bottom:  
    useDNS no

Adventurer

Re: Diagnostics VM Time to Deploy - 4.0.2.1

That is exactly the issue we saw.

 

We'll be building this into our install process.

 

Thanks for the confirmation team.

BEarena ruling the world, one node at a time!