AHV Virtualization

Webscale Virtualization for the Enterprise

  • 563 Topics
  • 1,884 Replies

563 Topics

D
Didi7Trailblazer
asked in AHV Virtualization

Nutanix AHV VM disk accidentially deleted ...

Ok, let’s get straight into the topic. On one of our VMs, we had 3 local disks and 5 NICs and we intended to remove 4 of the 5 NICs, which are no longer necessary. Instead of deleting the NIC in the last row, a disk in the last row has been deleted and no, a snapshot of the VM has unfortunately not been created. Is there any possibility to recover the deleted VM disk from this specific VM with AHV/CVM command line? Thanks in advance for any help! Regards,Didi7

7
D
46 minutes ago
K
KasunChathurangaAdventurer
asked in AHV Virtualization

Benifits with choosing Nutanix rather than vmware

what are we getting from nutanix rather than using vmware. I have few questions.how’s the license scheme in nutanix. what are the backups & recovery methods in nutanix. what type of softwares & products that supports with nutanix vm backup process. as an example in vmware backups. *Synology vmware backup * Qnap vmware backup * Veeam vmware backup & replication * Comvault vmbackup *Acronis vmware backup. How replication work in nutanix How High Availability feature work in nutanix. How vm Live/PowerdOff Migration work in nutanix what mechanism is use in nutanix while comparing to vmware vMotion what type of converters are use in nutanix. Ex: vCenter Converter in vmware what is the snapshot mechanism in nutanix.Thank You.

3
Moustafa Hindawi
23 hours ago
Z
ZAntonAdventurer
asked in AHV Virtualization

Nutanix CE + Microservices

Does Nutainix SE support deploy Microservices?P.S. I was trying 10+ times to deploy but every time get error.

8
Z
2 days ago
T
TrouBleTrailblazer
asked in AHV Virtualization

2USB Boot Medium

Can I also set the system so that I no longer need the 2nd USB stick?now the system needs this as a boot medium

4
T
6 days ago
T
TrouBleTrailblazer
asked in AHV Virtualization

Installation

Hello,I am desperate, I have 2 disks and the USB stick with the ISo on my server.If I now want to install Nutranix, I get to the disk selection, but even if I assign the disks to the respective letters, only Phoenix ISO is still mounted at the endThen the install aborts and I can go back to the disk selection.If I enter H,C, or D, the system says either I need SSD's, or I must have 2 disks, which I have.Do I need ESXI on the server, not really if I use the AHV version?

41
bcaballero
7 days ago
N
nezzerWayfarer
asked in AHV Virtualization

Attempting initial installation receive error: An error occurred while trying to illuminate the chassis LED

Hello! I’ve heard much fun and nice about nutanix and wanted to give it a go on a DELLEMC PE T40.However installation stops due to not being able to illuminate chassis LEDS.I’ve been lookin into this: https://svenbergendahl.com/resolve-intel-nuc-12th-gen-network-adapter-issue-during-nutanix-ce-installation However seems like this driver is not loaded and the problem seems to be elsewhere. 

6
JeroenTielen
7 days ago
C
ChinchillaVoyager
asked in AHV Virtualization

Degraded Node Detection

Hi All, Refer Degraded Node Detection should be enable. But it could allow disable in Prism. May we know when or why should disable Degraded Node Detection? Best regards

1
A
15 days ago
W
wangmengScout
asked in AHV Virtualization

Acopolis service issue

there is a problem：One or more cluster services in PCVM/CVM xxx restart within 15 minutes, with a total number of restarts>=10. The following are the services that have been restarted: ['acopolis'].

1
I
Nutanix Employee
20 days ago
P
Pål_RingnesAdventurer
asked in AHV Virtualization

workaround for CVM storage listed as HDD

We are trying out nutanix and in the installer, it asks me for CVM..When i chose the 7mm that clearly is SSD it says its HDD and will not install on it..Is there any workaround for installing cvm on this disk?/pålt7mm - Bay 0 LEN MTFDDAK240TDS-1AW1ZA  Normal 240 GB SATA SSD 2.5"”

8
P
20 days ago
S
Snatch9Voyager
asked in AHV Virtualization

Connectivity Issues Overlay subnet

In my lab cluster, I first activated Microservices. Then, I created a VPC followed by setting up an Overlay subnet. Finally, I attached my VMs for internal communication. However,: the VMs aren't acquiring IP addresses on the subnet configured within the Overlay subnet. Even after manually configuring the IP addressing, there is no communication between the VMs. Version 6.7.1.5 - STARTER LicenseNCC Version: 4.6.6.1LCM Version: 2.7.1 Version pc.2023.4NCC Version: 4.6.6LCM Version: 2.7.1MSP 2.4.5.0

2
S
21 days ago
T
TrouBleTrailblazer
asked in AHV Virtualization

ISO Download

Ey, im new here, where can i find the Iso´s for virtualization?I have a Dell Server, and i want testing nutanix

1
JeroenTielen
25 days ago
W
wangmengScout
asked in AHV Virtualization

Nutanixweb cannot be edited

PCVM/CVM xxx 中的一个或多个集群服务在 15 分钟内重新启动，重新启动总数为 >= 10。以下是已重新启动的服务：['acropolis']。

0
W
26 days ago
U
Ulises RMVoyager
asked in AHV Virtualization

AHV upgrade without lcm

Nice day nutanix community, A customer needs to upgrade his hypervisor but, for compliance reasons they cannot create a web server and request the internet access could take too much time. Coud it be possible upload a package directly to a cvm and then upgrade the cluster?

0
U
26 days ago
G
GiuseppePinoVoyager
asked in AHV Virtualization

Unable network controller

Hi,I have PC 2022.6.0.10, I receive the error “does not have sufficient resources” when I tried to enable network controller. My cluster is 6.5.5.5 and the CVM have 20Gb RAM.The PC has 31Gb RAM.ThanksRegards

0
G
27 days ago
B
badrulnadzriVoyager
asked in AHV Virtualization

High Memory Usage for CVMs

Hello everyone, I have few nutanix cluster, and all the CVMs has memory usage around 65-75% all time which I consider quite high.  is that normal? Thanks!

2
Moustafa Hindawi
28 days ago
C
ChinchillaVoyager
asked in AHV Virtualization

second management interface

Hi, Nutanix AHV cluster with default management 192.168.168.100 in eth0 and eth1(LACP), could Nutanix AHV cluster create second management interface in another network port and another subnet?  Best regards

3
JeroenTielen
29 days ago
A
Ashok KTrailblazer
asked in AHV Virtualization

Nutanix File Server Vlans

Hi Anyone help me on below quarry, I am little confession while deploying the File Server i have seen two options are one is client network and storage network.for client network we are taking  new three ips in the the client ip rangeand for storage network we are taking Four ips which are the new ip in the cvm rangehere …?which vlans should use for client network..?which vlans should use for storage network..? it would be appreciated if someone explain this as soon as possible. 

2
qamarabbas
30 days ago
R
RAFMPathfinder
asked in AHV Virtualization

Second Drive Disabled after Reboot

I have a VM which has been moved to AHV from Hyper-V. It’s Windows 2019 Standard  After a WSUS update and reboot it will - without fail - boot with the second drive disabled. When I right click and enable the drive everything is fine, I reboot again to get a proper startup of SQL because the SQL data and program files are on that volume.I have another server with two volumes that’s also a migrated Hyper-V VM, the only difference being the OS version. NGT is fine and the Nutanix drivers are hopefully up to date.At this point I am struggling to work out where to look for additional diagnostic information. I’ve looked through the logs and nothing jumps out… And as I said a regular reboot is fine. As far as I know WSUS is not doing driver updates.Can anyone point me at more useful diagnostic data. 

0
R
1 month ago
A
Aleim27Adventurer
asked in AHV Virtualization

AOS upgrade; AHV node failure

AOS 6.5 upgrade successfully but on of the AHV Node Failed, vm was migrated to another hostwhen tried to ssh ahv its pingable, cvm is pingable.tried creating a new vm and migrated to the problem host failed with error message. “host is not scheduable”Followed article but no help.https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000bv5YCAQCan someone please help me out here its a production Env. and I have no Support contract.

2
A
1 month ago
A
Aleim27Adventurer
asked in AHV Virtualization

Prism Central Root Partition usage exceeded 95%

Prism Central Root Partition usage exceeded 95%1.7G    /var/spool566M    /var/log6.8G    /usr/local/nutanixis there anything which can be removed safely.Please need support.Nutanix support contract expired. 

5
A
1 month ago
D
DC000Adventurer
asked in AHV Virtualization

Warning: Max HDD/Total capacity alert on hybrid nodes exceeded

I would like to know what the root cause for this Warning Alert. It occurs on the day i was patching the LCM to version 2.7.1 .  The Warning alert is Maximum supported HDD/Total capacity installed on hybrid nodes. Configured memory does not support the total capacity installed on NVMe nodes. I have ran the ncc health_checks system_checks dense_node_configuration_checks and result is:Detail information for dense_node_configuration_checks Node <Cluster Virtual IP>Warn:Node 97186 with 32GiB memory cannot support the HDD capacity of 70.96TiB. The minimum required memory for the current HDD capacity is 40GiB.Node 4 with 32GiB memory cannot support the HDD capacity of 71.03TiB. The minimum required memory for the current HDD capacity is 40GiB.Node 5 with 32GiB memory cannot support the HDD capacity of 71.46TiB. The minimum required memory for the current HDD capacity is 40GiB.Node 6 with 32GiB memory cannot support the HDD capacity of 70.89TiB. The minimum required memory for the curre

4
D
1 month ago
L
LoicSPathfinder
asked in AHV Virtualization

Feature Copy/paste from client into a AHV Console VM

Any update on using copy/paste from our workstation/laptop into a VM Console of windows VM hoted on AHV cluster? How Do I Enable Copy and Paste in AHV? | Nutanix Community this would be a great feature to implement but it does not seem to be any information as to when this would be available and we would be deploying 3 new AHV Clusters so not sure if this is on the pipeline. thank you

14
S
1 month ago
M
Mahendar ReddyTrailblazer
asked in AHV Virtualization

Protection domain snapshot monitoring alert configuration

can some one help me to configure protection domain snapshot failure alerts configuration

1
L
1 month ago
J
jssanche1975Adventurer
asked in AHV Virtualization

No space left on device - Exporting VM as OVA FILE

Hello!We are trying to export a VM as OVA file, but when the process rearch near 90% completed the “NO LEFT SPACE ON DEVICE” error appears.What could be wrong here? ​​​​​​​ Regards. 

2
J
1 month ago
P
Paul IlavarasuOutrider
asked in AHV Virtualization

Cisco ACI feature called “IP Dataplane Learning

We had a question regarding Cisco ACI feature called “IP Dataplane Learning”, whether we should disable it or leave it enabled

2
B
1 month ago

Badges

Show all badges
Terms & Conditions