Connecting Cloud Innovators: Building Community at .NEXT 2024
Hi, I just deployed my 2 clusters on separated Data Center. Right now i have no Link between them besides Internet (No VPN). Can i use NAT Destination of IP Public of each Data Center for the target of Remote Sites Configuration?Example:Data Center A : 123.234.123.234:2020 > NAT Destination to > 250.250.123.123:2020Data Center B : 234.123.234.123:2020 > NAT Destination to > 200.200.123.123:2020Can we configure like that in order to Remote Sites Configuration to work?
Hi,I’m trying to explore kubernetes by deploying Development Cluster. But it only stuck at 8% and eventually failed with notification (Internal Error : Failed to deploy ntnx dvp).Here is my detailSegment 192.168.2.x for Guest VM,PC,AOS and AHV. Segment 192.168.3.x for Kubernetes cluster itself (DHCP Enabled)Each segment can ping each other and all those segments are able to access the internet.Here is the detail of the temporary deployed Karbon VM (After failed deploying, the VM got deleted automatically)I’ve been reading someone posted same problem like mine, and it solved because of the VM previously unable to access the internet. But mine is able to access internet, PC and the Internal Nutanix.Perhaps someone can enlighten me what did i do wrong?-Able to pull newest docker image-Able to ping Prism Central (192.168.2.11)-Able to ping CVM (192.168.2.2)-Able to access internetDeploying Cluster stuck at 8%Deleting VM after failure deploymentNotification Internal Error : Failed to deploy
HiI have 4 Nodes cluster with the detailed network belowVLAN1000 : IPMI Usage (192.168.255.x/24)VLAN20 : GuestVM & Internal Cluster Network (192.168.2.x/24)I was using eth3 and eth4 in bond br0-up in bridge br0 (vs0) And then i’m adding a new vlan (VLAN30 : 192.168.3.x/24) for separating GuestVM network from Internal ClusterI am using eth0 and eth1 in another bond (bond br1-up in bridge br1) connected to my switchport mode access VLAN30. The problem is, when i created VM using that network (vs1), my guest vm cant ping anywhere even the gateway of its subnet. But when i test my laptop that connected to the switchport mode access VLAN30, my laptop can ping the Gateway.Here i give the detail of my topology and uplinks configurationTopologyUplinks of each hostsvs1 configuration Perhaps someone can enlight me maybe i missed something here when i’m trying to configure this? Thank you.
Hi, I have 2 Blocks (2 Nodes each) Cluster. I just added 2 DIMM Memory (2 x 32GB) in 1 of my Node. I put 2 memory on slot P1-DIMMC1 and P1-DIMMF1Before Adding DIMMAfterr Adding DIMMAfter that i ran NCC and shows warning like thisAlert from Nutanix ClusterAm i did something wrong with the steps by steps? Since in PRISM, total memory has been increased and i thought it’s just fine.
Hi, Im planning to add 2 more blocks NX-3060-G6 with 2 nodes on each block. Currently i have 2 Block Nutanix NX-3060-G6 with 2 Nodes on each block.Current topology is 2 Block nutanix connected to Cisco 2960X with all eth interfaces connected to it. My question is, In NX-3060-G6 there are 3 Ethernet interfaces, 1 for MGMT (IPMI) and there are other 2 eth interfaces and 2 SFP+. For networking purpose,Do we need to use those 2 eth interfaces from each node in order to work? Or do we need to use only 1 eth interface only on each node? We’re adding 1 more switch Juniper EX4600, so if we need to use those 2 eth interfaces, can we separate them? 1 Eth interface to Cisco 2960X and the other goes to EX4600? Can i have different VLAN on each interfaces (exclude MGMT) that i connect to switch?Sorry if my question isn’t clear enough. But i hope you do understand it. Thank you.NX-3060-G6Networking Topology (Just for Eth Interfaces)
Hi,I have 1 cluster 4 nodes nutanix. Any baseline to create a Preventive Maintenance Checklists Document?I just want to create a documentation saying that my nutanix cluster is just fine aside from NCC results. Maybe checklists for physical condition, firmware and etc? Thank you.
Hi, im new in nutanix. I have 1 cluster with 2 blocks and 4 nodes here. Everything went fine until im seeing no detail in memory usage unlike other of my VMs. How can this happen? I need my memory usage detail to monitor any of my VMs with high resource usage. Any Solution to solve this off?
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.