The Foundation for Your Hybrid Cloud
Most replies
Greetings all,Testing out an upgrades I have faced some problems upgrading cluster from 5.20 straight to 6.5.2 AOS version using dark site web server. Even though the Upgrade Path shows that such upgrade is supported, and I was able to upgrade all the other components including the AOS itself using Prism LCM. The only problem is that after Performing Inventory and even after the upgrade complete it does not show AHV version changed or the upgrade available and the AHV version stays the same. I have tried to perform Direct Upload too and even though I could see the uploaded AHV version I still was unable to upgrade it. Upgrade to 6.5.1.8 version went successful, however. So I had to try it with 6.5.2.5 and the result stays the same as with 6.5.2First I tried to upgrade fromAOS 5.20.1.1 AHV 20201105.2096 → AOS 6.5.2 AHV 20220304.342then after reimaging the cluster toAOS 5.20.2.1 AHV 20201105.2244 → AOS 6.5.2 AHV 20220304.342.Both upgrades showed same results, then after reimaging the c
Hi guys, I'm still digging to give corrects answer to my manager who is puting pros and cons for nutanix on the table. As I need to make a design without knowing exactly where he want to go, I'm making assomption on it. I understood that they wanted to put NSX on it VRA and vCloud SP. I've found a couple of recommandations / tips on NSX over NUTANIX but nothing that can be used on design part (more on implementation which is quite cool !) Do someone have integrated it on a 4.5 cluster ? do Nutanix plan to give us a technical note / any other cool stuff on NSX ? sheers,
Hello every one Can you supporting me in my Case we have now 3 nodes NX and we need add new node NX-8135N.When I foundation vm the installation failed and I get this log error
We have migrated few VMs from VMware to Nutanix, and Static IP information no longer visible in Adapter settings.
We have upgrade a old cluster from AHV 6.5.6.6 to 6.5.6.7 but one node are’nt upgrade. And I can perfom the upgrade by web. Is it possible to upgrade one node by cli ? Moreover can upgrade to the ahv 7 ? Kind regards
Hi,Since upgrading to PC 7.6 / AOS 11.2 we’ve tipped over the edge on available CPU resources and are experiencing some performance issues (Spikes in CPU Wait, application failures) we’ve engaged with support who identified ADS/Solver being unable to move VM’s to reduce hotspots, because all hosts are hotspots, and we’re basically oversubscribed. I won’t deny this, but we weren’t experiencing so many issues before the update. Support advice is to reduce vCPU allocation on vm’s that don’t need them. We’ve got a lot of VM’s reporting as over provisioned, the majority of these are windows VM’s with 2 vCPU’s our testing has shown that with only a single vCPU windows really doesn’t work well. So i have some questions:Has anyone else noticed an increase in consumed CPU resources following update to PC/AOS 7.6 Do others experience the same with windows server VM’s, or is it a feature of our environment that 2 vCPU’s is the minimum If you do experience the same, do you just live with a large
Hi Guy’s I'm trying to update our Dev environment which runs on community edition, and AOS, NCC etc all working via LCM, for the AHV though it will just keep failing every single time.It just goes round in a loop watching from the ilo, it first does choose AHV re image, the it reboots and get to that same screen and then just boots to current AHV OS.So is there a way to do this manually without it affecting the CVM’s config running on them?ThanksMark
Does AHV supports MSCS ? I am aware about two node windows cluster with witness VM mentioned in below : https://portal.nutanix.com/#/page/docs/details?targetId=Web-Console-Guide-Prism-v58:wc-cluster-two-node-c.html But just want to confirm if it supports MSCS with shared storage including quorum?
We are moving away from VMware over to Acropolis and I was wondering what others have been using to backup their VMs under Acropolis, 3rd party wise? Under VMware, we had been using Veeam, but this is no longer a choice.Any comments/suggestions would be helpful.
Hi,I have recently deployed a pair of AHV clusters on a customer. Each cluster has its own Prism Central cause they are going to be part of a Metro availability environment with a witness VM on a third site.Now the customer is asking me if he could have some kind of overview and managing of both clusters from a single dashboard.I think that Nutanix Central could accomplish that request, however I’ve never deployed it and I have some questions.Checking the documentation I see that you can deploy it onpremise by downloading it from each Prism Central marketplace. So I assume it will deploy a VM appliance on each cluster (similar to prism central) and I should have to config it.Are there any specific tips that you could provide before deploying it?By the way, both clusters have PC 7.5.0.5 and AHV 11, everything is up to date, so I assume there is no incompatibility with nutanix central.Thanks in advance!
Hi,I am trying to move a Windows Server 2012 R2 VM from Xenserver to AHV. With reference to this article: AHV | Migrating a Windows VM from XenServer to AHV everything is working great except when I am at the last step. When I turn on the VM in AHV, I am getting a boot device not found error and windows will not boot up.Windows will start with a windows icon throws the error and restarts, then goes into disk repair, reboots and same error and goes into the troubleshooting menu and when I am restart the VM in AHV it again and always goes into the boot disk inaccessible error.I made sure all the Xen components are already uninstalled from the vm and Nutanix VirtIO drivers are also installed. Tried with loading the image as scsi and IDE, but still going into the same error. Also tried booting up in safe mode, tried disk repair, etc. but no luck.Please help if someone has a solution.PS: I am migrating Windows Server 2012 R2 from XenServer to Nutanix AHV.
Trying the veeam AHV appliance, i had a crash whilst taking a backup now am left with orphaned snapshots on a PAID ACCOUNT, and nutanix sends the ball to veeam back to nutanix, so here i am Protection Domain DP-QC-3 has 3 aged third-party backup snapshot(s) and may unnecessarily consume storage space in the cluster. i have a multitude of these and want to manually remove those snapshots, is there a process for this ?
Hi Does anyone having experience or recommendation for tuning Postgresql Server Workload on Nutanix? We followed the Nutanix SQL Server Best Practices and Micheal Webster's Recommandations for vDisk and LVM layout at: http://longwhiteclouds.com/2014/11/27/performance-testing-mysql-and-postgresql-with-hammerdb-and-pgbench/ Unfortunately, the Performance does not meet our expactation compared to our old PostgreSQL server running on a NetApp Filer. Out Setup: 3 Nodes Nutanix Cluster NX-6035-G4 with 1200 GB SSD, NOS 4.6.11 vSphere 6
Hello Team,I have recently deployed a Nutanix solution, and everything is working as expected. I have also deployed a virtual machine with the Veeam Backup solution, which is running successfully.I have an external USB HDD that I would like to map or make accessible within the VM as a storage. Could you please guide me on how this can be achieved?Thank you for your assistance.
I was honored by my company, and recieve 1 block 4 nodes NX-3060-G5 for use on my own projects. It’s a old node without support and inside of EOL list. What happened is that, i don’t know how, received an alert saying that AHV had a crash on files. But 20 seconds after the host was okay, and the alert was solved itself. But, 3 machines which was working into this node crashed too, preventing access through console, migrate the VMs, power off, etc. I tried remove the host for reimage it, but is stuck: And when I ran the NCLI command to remove the host, trying get the status, shows the follow: Anyone could help me for solve this issue? Any tips?
We attempted to migrate our ODNS as well as setup new VM's in AHV by extracting the vmdk's but each time we get the below screen on boot. Has anyone else successfully got the ODNS VA to run in AHV? I've tried editing the vm's xml file to change the video type and vram but no luck as of yet:
Hello! I’m pretty new to this Nutanix world. Have been dealing with standard server+storage for more than a decade. We have 2 clusters here, with 3 nodes in each site with metro availability. There are 3 protection domains active in each site (active) that are replicated to the other site (passive) and vice-versa. Site1: Node1 - Node3 - Node5 PDs site1 (active): PROD_001, DEV_001, INFRA_001 PDs site1 (passive): PROD_002, DEV_002, INFRA_002 Site2: Node2 - Node4 - Node6 PDs site2 (active): PROD_002, DEV_002, INFRA_002 PDs site2 (passive): PROD_001, DEV_001, INFRA_001 In vCenter cluster configuration we obviously have affinity rules for VMs/Hosts in site1 and VMs/Hosts in site2, preventing the VMs running in “odd” nodes from being stored in “even” nodes. Sometimes we have to migrate VMs from one site to another. So we do a complete vmotion (compute and storage). After the migration, we start to constantly receive alerts with this message: Snapshot status for vstore INFRA_001: Faile
Hi All, Just wanted to let you know that using traditional SQL failover clusters and SQL FCI, or any MSCS / Microsoft failover cluster is available in tech preview as of NOS 4.1.5. This is because we have introduced SCSI 3 Persistent Reservations to the iSCSI stack. To implement a cluster you need to use the MS iSCSI Initator and the Nutanix Volume Groups contract and iSCSI target for in-Guest iSCSI access. This will become a full GA feature in an upcoming release of NOS. Please experiment with it and let us know your thoughts.
Hello mates, We have 2x NX3350 and Arista switch which handle roughly 100 VM. Workloads are: 20x VM with heavy disk workload which are used mainly for reporting and analysis. R/W ratio is roughly 50/50. They created 20K IOPS workload when they lived on SAN storage with RAID10 and tiny flash tier and average latency was always below 5 ms. 10x VM which are used for application virtualization 70x VM which are use for desktop virtualization. Now, when we migrated to Nutanix, we have only 4K cluster IOPS and 20 ms latency which does not seems to be very good for us. Trying to resolve the issue, we enabled inline compression and increased CVM memory up to 20GB. We also tried to change tier sequential write priority. Unfortunately, this does not help. ncc, cluster status and prism health claim that everything is ok. Before we migrated our environment, we've run diagnostic VM and the results was roughly 100K IOPS for read. Here is the current configuration of cluster:NOS Version: 4
I want to Install Nutanix on Dell power edge R740xd but i faced lots of error, there log screens show these errors When i Used nutanix foundation for windows the error i faced IPMItools is missing, i tried foundation on virtualbox but still ipmi can,t mount iso file What should I do to run this lab successfully 🤔
i have two cluster main cluster and DR cluster , what is the best practice to upgrade two cluster , can i start with main or DR first , what about replication it is effected with upgade?
Hello Nutanix Community,I’m reaching out for help after spending a significant amount of time troubleshooting an issue where a Nutanix cluster cannot complete initialization. I would truly appreciate any insight from the community, as I believe I have exhausted all standard troubleshooting paths.This cluster was previously created successfully and had been running in production without issues.However, due to security-related changes in our IT infrastructure, we were required to re-address the entire environment, including: CVM IPs Hypervisor IPs IPMI IPs Because of this requirement, I intentionally chose the cleanest and officially recommended approach, which was: Reclaim licenses Stop the cluster Destroy the cluster Rebuild the cluster from scratch using Nutanix Foundation This was not an accidental failure during a first-time installation.The issue only started after performing a controlled teardown and reinstallation due to the IP address changes. Support experience and re
Dear Community, I have an issue. I'm installing a Windows 2008 standard (not R2 nor SP1) on a AHV cluster and then I need the virtIO drivers. It works fine for the iSCSI passthrough driver and the baloon. But the Networking adapter is failed. It says drivers are not signed and cannot be verified, I bypass the warning and then it says there is an error, driver corrupt blablabla. I have tried the latest Nutanix virtIO without any luck - whatever OS version, they all failed. any magic idea ? Thanks 😉
Hi fellas,Does anyone have a clear answer of what is the real cost of AHV? I’m told that AHV is free but is this referring to only Nutanix Community Edition? What about AOS? when purchasing a Nutanix node/block/cluster, these come pre-installed but the cluster essentially has no ‘smarts’ without the CVM which is AOS.Referencing this Licensing Quick Reference Guide, it looks like AHV is included with AOS but AOS’ licensing metric is charged per node. Am I reading this correctly?Is it possible to run AHV without AOS? Thanks,JS
Does anyone have some experience with running SAP on Nutanix, doesn't matter if it runs on HyperV or VMware. Oracle or MS SQL is ok. Just looking for some feedback and best practices. Kind regards Bart
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.