Solved

Timeout when ssh to AHV


Badge +3
Hi,

I have 03 nodes XC-630-10. I am an new Nutanix and I can ssh to each CVM, each AHV.
But when I ssh to CVM and can not using ssh to AHV. It show:

nutanix@NTNX-.....-A-CVM:x.x.x.x:~$ ssh root@10.10.150.171 ovs-appctl bond/show br0-upFIPS mode initializedssh: connect to host 10.10.150.171 port 22: Connection timed out

What happen with my cluster. Thank for your responese.
icon

Best answer by hienle 11 May 2017, 08:15

You can have a other way to work around on this by using the internal network 192.168.5.0 between CVM and Host to execute the command remotely
By the way, you should check the connection to the desired host IP and SSH port as well

// Bạn đang ở VN?

View original

5 replies

Badge +3
Hi, huynguyen

Make sure that both CVM and AHV hosts reside in the same subnet and VLAN.
Have You tried ping from CVM to AHV host?
Userlevel 1
Badge +16
You can have a other way to work around on this by using the internal network 192.168.5.0 between CVM and Host to execute the command remotely
By the way, you should check the connection to the desired host IP and SSH port as well

// Bạn đang ở VN?
Badge +3
I think that using virbr0 in this particular case is not the right thing to do. It will work, but the host should be reachable for CVM anyway. No network connectivity between CVM and host indicates that there is a problem (probably a misconfiguration). IMHO, working it around this way and leaving without a solution may (and I bet it will) lead to some much more serious problems with a cluster...
Badge +3
That is the way I missing. I already connected now using local address 192.168.5.0
Thanks a lot.
//Huy ở VN và đang công tác ở CA
Userlevel 4
Badge +17
huynguyen it should be no issue when ssh to AHV through CVMas of XC you need to connect both 1GB and 10GB port
could you post you OVS config ?

Reply