Hi all,
I have already posted this problem in other forum section but maybe it should not be there so I repost it here so that I could get an appropriate and fast answer
To summarize the problem, I am in the same situation in which I cannot enable the deduplication on HDD and I have also tried running the commands below and the result seems a little bit inadequate because I have configured the CVM RAM up to 32GB
nutanix@NTNX-13SM31320001-B-CVM:10.9.120.115:~$ allssh 'grep "for on-disk deduplication feature" ~/data/logs/stargate*'Executing grep "for on-disk deduplication feature" ~/data/logs/stargate* on the cluster================== 10.9.120.114 =================FIPS mode initializedNutanix Controller VM================== 10.9.120.115 =================FIPS mode initializedNutanix Controller VM================== 10.9.120.116 =================FIPS mode initializedNutanix Controller VM/home/nutanix/data/logs/stargate.NTNX-13SM31320001-C-CVM.nutanix.log.INFO.2016120424949.13003:W1209 01:08:28.571275 13361 stargate_cluster_state.cc:1146] The system, which has 16GB RAM and 716GB SSD, does not satisfy the minimum requirements of 24GB RAM and 300GB SSD for on-disk deduplication feature================== 10.9.120.117 =================FIPS mode initializedNutanix Controller VMnutanix@NTNX-13SM31320001-B-CVM:10.9.120.115:~$
This topic has been closed for comments
Userlevel 6
+29
- Nutanix Employee
- 569 replies
-
20 December 2016
Interesting, ok, I understand. I asked our support team to reach out, as the commands to get this cleared are generally only give out by support, since they are CLI operations.
Jon
Jon
Hi Jon,
Because of some unexpected reason, unlucklily I cannot create the case for this time.
By the way, below is my result from your recommendation command:
nutanix@NTNX-13SM31320001-B-CVM:10.9.120.115:~$ allssh 'free -m'Executing free -m on the cluster================== 10.9.120.114 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 7874 24366 0 526 3798-/+ buffers/cache: 3548 28691Swap: 0 0 0================== 10.9.120.115 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 7649 24590 0 526 3500-/+ buffers/cache: 3622 28617Swap: 0 0 0================== 10.9.120.116 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 14955 17285 0 544 3511-/+ buffers/cache: 10899 21340Swap: 0 0 0================== 10.9.120.117 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 12079 20161 0 541 3472-/+ buffers/cache: 8064 24175Swap: 0 0 0nutanix@NTNX-13SM31320001-B-CVM:10.9.120.115:~$
Because of some unexpected reason, unlucklily I cannot create the case for this time.
By the way, below is my result from your recommendation command:
nutanix@NTNX-13SM31320001-B-CVM:10.9.120.115:~$ allssh 'free -m'Executing free -m on the cluster================== 10.9.120.114 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 7874 24366 0 526 3798-/+ buffers/cache: 3548 28691Swap: 0 0 0================== 10.9.120.115 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 7649 24590 0 526 3500-/+ buffers/cache: 3622 28617Swap: 0 0 0================== 10.9.120.116 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 14955 17285 0 544 3511-/+ buffers/cache: 10899 21340Swap: 0 0 0================== 10.9.120.117 =================FIPS mode initializedNutanix Controller VMtotal used free shared buffers cachedMem: 32240 12079 20161 0 541 3472-/+ buffers/cache: 8064 24175Swap: 0 0 0nutanix@NTNX-13SM31320001-B-CVM:10.9.120.115:~$
Userlevel 6
+29
- Nutanix Employee
- 569 replies
-
20 December 2016
hienle - Posting this same response on both of your open posts.
Just double checking here, did you verify that CVM 10.9.120.116 actually has 24GB+ of RAM (which you can validate with allssh "free -m")?
If so, no worries, the serial number of the system you posted (13SM31320001) has a support contract running until Februrary 20th 2017. Please file a support ticket and ask them to send you the commands from KB 2684 to clear the disable_fingerprinting setting in zeus.
Just double checking here, did you verify that CVM 10.9.120.116 actually has 24GB+ of RAM (which you can validate with allssh "free -m")?
If so, no worries, the serial number of the system you posted (13SM31320001) has a support contract running until Februrary 20th 2017. Please file a support ticket and ask them to send you the commands from KB 2684 to clear the disable_fingerprinting setting in zeus.
Hi Jon,
This is not a production system but I have to build up the same system with customer to figure out the answer for their questions about deduplication
And I think that could be a good point if you give me some susggestion on troubleshooting on this problem.
This is not a production system but I have to build up the same system with customer to figure out the answer for their questions about deduplication
And I think that could be a good point if you give me some susggestion on troubleshooting on this problem.
Userlevel 6
+29
- Nutanix Employee
- 569 replies
-
19 December 2016
If this is for a production system, please file a support ticket and we can help you clear that error via CLI.
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.