Deployment Success

All, I have a 6 Node 1065 system in 2 blocks.  Recently one of the CVMs (node 2, block A) crashed.  When rebooted it was just going in loops.  When diagnosed it seems the SSD (not the SATADOM) had failed and we replaced it.  When we try to boot the CVM, it still just loops. We were told to boot that node with Phoenix which the cluster provided me for download.  I do that and it doesn’t load Phoenix and gets errors instead.  I’m looking for a suggestion of how to get the node back to 100%.  At this point (and throughout) the ESXi on the SATADOM has booted fine and I guess if I didn’t care about the storage side I could just ignore this but I’d like the system to be fully healthy. Any suggestion about how to get the CVM working again would be appreciated. Thank you Johan

Hi, I am having two physical sites with on-prem nutanix cluster. I am trying to config async dr from primary to secondary site every one hour. So the snapshot will trigger every one hour and replicate to the secondary site. I read in the portal , the first replica is a full copy and the subsequent are incremental. My question here is , once my first replica, which is a full copy of my data was completed to the secondary site and certain period of time, my first replica will expire and deleted based on my retention configuration. In that case, how can I restore my full data with the help of incremental snapshot from the remote site?

Hi all - we have HUGE problems in Denmark with setting the correct Daylight savings in AHV A clock / time settings apprently not just an option in AHV.. We found that we neede to set this in Windows guests to get the clock correct - otherwise it was 2 hours wrong reg add "HKEY_LOCAL_MACHINESystemCurrentControlSetControlTimeZoneInformation" /v RealTimeIsUniversal /d 1 /t REG_DWORD /f Now when we have shifted to winter time CET instead of CEST and we shutdown the VM's the clock is 1 hour wrong!! What is the 100% correct way to handle time on AHV? I have never had issues on VMware, HyperV or Xen with this basic stuff.. 😞 If anyone could lead me to a KB or something about this issue?

Hi TeamI am trying to setup Prism Central in Nutanix CE. I have configured the required details in Prism Console for deploying prism central. My deployment is failing repeatedly and getting the error saying it’s failed in tarball extraction phase. I have tried multiple times and every time I saw the issue in UI. I went through the /home/nutanix/data/logs/genesis.out logs to get more details on the issue. I found something interesting there. When we start the Prism central deployment, it first tried to download the prism central tarball and unzip it. One it’s unzipped then it’s start to convert the qcow2 file to image. when it start to convert the qcow2 → image , the command is configured with a timeout of 1800 sec. Please have a look into the below log line. 2024-07-01 08:55:17,702Z INFO 25030000 uvm.py:1606 Running cmd ['/usr/bin/timeout', '1800', '/usr/local/nutanix/bin/qemu-img', 'convert', '-p', '-f', 'qcow2', '-O', 'raw',

Are there ANY plans to expand on the PowerShell cmdlets at all, specifically for getting host info? They’re pretty bare bones. I don’t even know the last time the cmdlets were updated/expanded. It seems to me Nutanix regrets making them and hopes they will quietly die. I have relied heavily on PowerShell to keep tabs on a very large Nutanix environment running Nutanix on both AHV and ESXi. I’m talking 700+ nodes. The ESXi clusters are no problem getting the info from because I use VMware’s PowerCLI to supplement the lack of data I can get with Nutanix Cmdlets, but the AHV clusters are another story since I don’t have PowerCLI to fall back on. Can we at least get a cmdlet that will allow us to use PowerShell to initiate ncli or acli commands, like VMware does with the “Get-EsxCLI” cmdlet. That would be very helpful.

I work as cyber security engineer.My client wants to deploy Nutanix on-premise and want to integrate existing ERP (Epicore) to Nutanix.Client has total 7 plants, including 1 Head Office and 6 Other plants at different location.Below is the network diagram that i have created:.  I just want to know where and how should i integrate Nutanix, for better performance??What will be the Node details ,i.e, how many nodes are required?What will be the Node configuration?Requirement is Nodes with Gold Processor.!!!Server: Dell R640 Power Edge, RAM: 512, HDD=960GBx6  

Hello, first time poster. I’ve created a one-node cluster on an intel NUC 10 (NUC10FNH) using latest phoenix image. install went fine after a couple of hardware bumps but node is up, CVM is running etc. The issue I’m having is I can’t power on any VMs I create. It only gives a generic “InternalException” error. In the uhura.out log, there are these entries “Error: HypervisorError: internal error: QEMU unexpectedly closed the monitor” and “qemu-kvm: Address space limit 0x7fffffffff < 0x4bcbfffffff phys-bits too low (39): 61”. Having a hard time trying to make sense of this. I’ve read other people running on the same hardware with no issues, maybe it’s the specific version of the CPU (it’s an i7-10710U). one-node cluster, 64GB RAM, one 500GB m.2 SSD and one 500GB SATA SSD. booting off a 64GB usb drive. Any info would be appreciated. Thank you.

Hello Nutanix I am currently in progress of deployment of Acropolis File Services (AFS) Everything has been going well until the "Can't contact LDAP Server" error occured I have given it a check by viewing some configuration on NVM and found out that although on Prism, they have been assigned with 2 IPs but actually running with only 1 IP when checked via console by ifconfig command (eth0 only) Let me make it clearer via the "topology" below: CVMs connecting to NVMs by Subnet A IPs Clients, AD and DNS servers should be connected to NVMs by Subnet B IPs Recently, those NVMs are running with only 1 Subnet A IP although on Prism, I saw they have already assign with both Subnets?! My block is running with AOS 4.7.2. I have also given some seaches around and seen that both Internal and External networks could be the same as described in this video?!

This is now CE installation trial #5 or 6 or so. Now this time I went with the official publication and ended up with a PE that doesn’t give me an option to install PC - not even showing AHV Trying to install CE as a VM unter ESXi 7.0.u2 According to the manual I gave the H volume a drive on SSD (with 700GB as the prior trials to install PC always came up with a not enough resource error), for C of NVME 800GB and for D 2TB on the same NVMe After primary deployment I went on with the cluster generation via SSH. End this time ending up with that. The quality of that CE doesn’t really flash me.  

Hi TeamI had a complete working setup of Nutanix Community Edition along with Prism Central deployed. I was able to access my prism central through UI and Rest API for working with virtual machines. But suddenly i was disconnected from my PCVM today morning and was not able to access anymore. I tried to do ssh and logged in through PC UI but I couldn’t. I am able to log into both my AHV VM and CVM. In CVM, cluster status is showing all services are up and running.Referred this KB article but no luck.https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000CpzXCASCan you please help me here. Attaching the required screenshots.

Has anyone used Ansible for Automating Nutanix tasks. Can someone share some examples please.

Howdy all. I’m trying to install Nutanix CE on a blade server to evaluate it as an alternative to VMWare. I keep getting this error when installing though, before being dropped to a root shell.NFO Phoenix ISO is already mountedNFO Picking the bundled hypervisor:/mnt/sum_installer/./install/ahu/kum_hostATAL An exception was raised: Traceback (most recent call last):File "./phoenix", line 152, in <module>main()File "./phoenix", line 87, in mainparams = gui.get_params (gui. CEGui)File "/root/phoenix/gui.py", line 1830, in get_paramsreturn run_gui (guitype)File "/root/phoenix/gui.py", line 1854, in run_guiparams = get_params_from_gui (gui)File "/root/phoenix/gui.py", line 1626, in get_params_from_guigp.p_list.ce_hyp_boot_disk = obj.hyp_boot_disk[0]ndexError: list index out of rangeI attempted to remove the RAID card, as I read that that can cause issues on installatio

Hello. i Have a 4 nodes Lenovo HX3320. When i want to install AOS it fails. Foundation 4.6AOS 5.15.4 I updated bmc firmware and reset it. But it didnt work.Can you help me with this problemhere is the log 2020-12-10 12:38:39,191Z DEBUG Setting state of <ImagingStepValidation(<NodeConfig(192.168.1.22) @e2d0>) @e5f0> from PENDING to RUNNING2020-12-10 12:38:39,197Z INFO Running <ImagingStepValidation(<NodeConfig(192.168.1.22) @e2d0>) @e5f0>2020-12-10 12:41:01,398Z DEBUG Cache HIT: key(<function common_validations at 0x03D71230>_()_{'global_config': <foundation.config_manager.GlobalConfig object at 0x054D0E90>})2020-12-10 12:41:01,405Z DEBUG Setting state of <ImagingStepValidation(<NodeConfig(192.168.1.22) @e2d0>) @e5f0> from RUNNING to FINISHED2020-12-10 12:41:01,410Z INFO Completed <ImagingStepValidation(<NodeConfig(192.168.1.22) @e2d0>) @e5f0>2020

Hi, Im planning to add 2 more blocks NX-3060-G6 with 2 nodes on each block. Currently i have 2 Block Nutanix NX-3060-G6 with 2 Nodes on each block.Current topology is 2 Block nutanix connected to Cisco 2960X with all eth interfaces connected to it. My question is, In NX-3060-G6 there are 3 Ethernet interfaces, 1 for MGMT (IPMI) and there are other 2 eth interfaces and 2 SFP+. For networking purpose,Do we need to use those 2 eth interfaces from each node in order to work? Or do we need to use only 1 eth interface only on each node? We’re adding 1 more switch Juniper EX4600, so if we need to use those 2 eth interfaces, can we separate them? 1 Eth interface to Cisco 2960X and the other goes to EX4600? Can i have different VLAN on each interfaces (exclude MGMT) that i connect to switch?Sorry if my question isn’t clear enough. But i hope you do understand it. Thank you.

Hi! I've got several questions about the usage of v2 API which I have not been able to solve by myself after looking a little while.on some endpoints, for example, GET /alerts, GET /vms and a few more things are functioning for me as expected, but on other endpoints, such as POST /vms/{uuid}/set_power_state I am receiving the following response:{ "message": "Access is denied", "detailed_message": null, "error_code": { "code": 1100, "help_url": "http://my.nutanix.com" }}any idea what's causing it? I've been searching for detailed information on your error code (such as 1100 listed above) and couldn’t find. Is there any documentation to the error codes that  you can send me a link to?Also, in a few of the API endpoints I couldn’t understand exactly what is the expected query parameter to be sent.2 examples of endpoints I felt I am lacking knowledg

Hello,I have tested Nutanix a bit and would like to know if it is possible to move VMs from Nutanix to Proxmox?I have found the discs from one VM, but I would have to convert the files to gpt etc.?So that I can use the Windows VM in Proxmox again?

Hello, I want to share a development in python to collect information from the Nutanix cluster with AHV, very similar to an RVTOOLS. I have it published in Github. I hope you find it useful. Any questions or queries can write to dlira96@gmail.com https://github.com/dlira2/Nutanix-tools-for-AHV Example running : Example INFO: Summary VMINFO :

Hi AllWhen I try to install AOS 6.5.2 I get the following errors.  IOError: [Errno 2] No such file or directory: '/etc/nutanix/factory_config.json' 2023-03-07 13:19:54,652Z CRITICAL svm_rescue:926 No suitable SVM boot disk found. 2023-03-07 13:19:54,652Z INFO svm_rescue:114 exec_cmd: sync; sync; sync 2023-03-07 13:19:54,658Z INFO svm_rescue:114 exec_cmd: umount -R /mnt/disk 2023-03-07 13:19:54,663Z INFO svm_rescue:114 exec_cmd: umount -R /mnt/data] 2023-03-07 13:19:52,159Z INFO Imaging thread 'svm' failed with reason [None] 2023-03-07 13:19:52,164Z CRITICAL Imaging thread 'svm' failed with reason [None] 2023-03-07 13:19:52,200Z ERROR Exception in running <InstallHypervisorKVM(<NodeConfig(172.16.150.9) @b5d0>) @ee10> Traceback (most recent call last): File "foundation/imaging_step.py", line 161, in _run File "foundation/imaging_step_hypervisor.py", line 47, in run File "foundation/imaging_step.py", line 353, in wait_for_event StandardError

Hello FriendsHow are you? Currently i am trying to foundation A Nutanix 3 node environment but after the foundation process begins it will halt at “waiting for the installer to boot” stage with “fatal” error warning i don’t know what is causing the error can anyone tell me something.I have attached screenshots of errors and process. 

Hi I would like to know where to download NOS phoenix for DELL XC ? I manage to install hypervisor ESXi but unable to find download for NOS phoenix for DELL XC? Is there a specific ? Kindy advise. Compatible NOS?

We have Red Hat Virtualization from where we are going to migrate to Nutanix AHV. Virtual machines in RHV are LVM, not disks, because we are using fibre channel. How can we migrate virtual machines from RHV to AHV?

Hello I don't know if this will be useful for anyone but I came up with a few command lines to change the default passwords for the CVM and IPMI users and create a new user to mimic the dell DRAC's user #change IPMI passwordfor i in `hostips`; do ssh root@$i 'for id in `/ipmitool user list |grep 'ADMIN '|cut -d" " -f1`;do echo $id;/ipmitool user set password $id ;done' ; donefor i in `ncli host list | grep -E 'ID ' | cut -d":" -f4`; do ncli host edit id=$i ipmi-password=; done #create root user on all nodes ipmi to keep consitant with Dell Dracfor i in `hostips`; do ssh root@$i '/ipmitool user set name 3 root;/ipmitool user set password 3 ; /ipmitool user priv 3 4;/ipmitool channel setaccess 1 3 privilege=4;/ipmitool user enable 3' ; done # change esxi passwordfor i in `hostips`;do echo "--$i--";ssh root@$i 'echo -e "" | passwd';done #change cvm passwordfor i in `svmips`;do echo "--$i--";ssh nutanix@$i 'echo -e ""

HI Team, Recently I have installed Nutanix CE on Dell Power Edge R430. I am facing issue while trying to create network configs for creation of VMs. My lab network is shown below,I have interfaces from eth0 - eth7. eth4 is connected to Network 10.146.20.0/24, I would like to configure the same in Nutanix, so that the VMs that I create fall under the same subnet. I tried creating subnet and booted an Linux instance to check the reachability. I am unable to reach GW from that linux.  I reached out to my lab team, and they suggested to have eth4 alone in a bond. To do that, I tried to assign eth4 to vs0 alone but unable to do it. Could you please let me know what are the series of steps that need to be followed so that I could successfully cr

Hello, after new install single-node cluster, i dont change pass for root user. # passwd root bash: passwd: command not found what am I doing wrong?

Hi All I have something odd in my Network view in Prism - I have 3 switches ( 1 switch is a 2 switch stack) but the view shows 5 switches, 2 classified as None. The None entries have the ip addresses of one of the single recognised switches and the stack which is already identified. The other odd thing is that the Nones have ports that I would expect to see in the identified switches. Can anyone tell me how to correct this?