Cloud Native

See how easy it is to deploy a Kubernetes cluster in under 10 minutes with Nutanix Kubernetes Platform (NKP). In this quick tutorial, Nimal Kunnath walks you through the creation of an NKP Management cluster on the Nutanix AHV hypervisor.Perfect for anyone looking to simplify their Kubernetes deployment, Nutanix offers seamless integration and automation to help you get up and running fast. Watch now to streamline your Kubernetes journey with NKP! 

Hi!While preparing for the Nutanix NCP-CN certification, I wanted a hands-on way to explore the Nutanix Kubernetes Platform (NKP) — even without a Nutanix cluster.Since deploying NKP on Linux VMs involves significantly more manual configuration steps than on a Nutanix Cluster, it turned out to be the more time consuming but also far more educational path.This guide walks through building a lightweight NKP lab environment, ideal for learning, testing, or experimenting alongside the official NKP Administration training from Nutanix University.Hope this is valuable for some of you ✌️

During the installation of the NKP cluster you need to set an IP-address for the CONTROL_PLANE_ENDPOINT. Unfortunately the rocky linux node (nkp-rocky-9.5-release-1.31.4-20250409153435.qcow2) also tries to obtain an IP-adress via DHCP on the same nic. As a result the nic gets 2 IP-addresses in the same subnet (1 from the installer and 1 from the DHCP)  and reports back to nkp with the DHCP address. This results in a failing install of nkp cluster. 

HI,I have a test environment and wanted to checkout the NKP Deployment from Marketplace with Prism Central 7.5.0.1 but I am unable to get a OS Image listed in the deployment:I setup a Ubuntu VM 22.04 before and installed NKP 2.16.1 and ran nkp create image nutanix ubuntu-22.0 successfully, image is visible in Prism Central with name nkp-ubuntu-22.04-1.33.5-20260104141512I am a bit lost know if I did something wrong or misunderstood - having the environment for limited time would be happy to get some good hints if possible.Thanks,Sebastian

In this demo, we’ll show you how to navigate the NKP interface, create Kubernetes clusters, simplify Day 2 operations, and deploy applications with ease. See how NKP streamlines cluster management and makes operating Kubernetes effortless. 

How are you migrating your stateful applications from NKE to NKP. Thanks!

Join Nutanix Technical Marketing Engineers, Nimal Kunnath and Kapil Anandani, to learn about Running Kubernetes in Production with Nutanix Kubernetes Platform (NKP).Here’s what is covered: why Kubernetes isn’t enough for running containers in production, how NKP unlocks platform engineering to run cloud-native applications in production, anywhere, at scale, demo of day-2 operations with NKP and its built-in platform services, and demo of deploying applications consistently at scale with GitOps.Take Nutanix NKP for a Test Drive: https://www.nutanix.com/one-platform 

I want to upgrade NKP from 2.14 to 2.15I downloaded airgap bundle nkp-air-gapped-bundle_v2.15.0_linux_amd64.tar.gz from Nutanix download page.Following documentation : https://portal.nutanix.com/page/documents/details?targetId=Nutanix-Kubernetes-Platform-v2_15:top-ug-nkp-ag-load-pr-nkp-cat-apps-c.htmlWe need to load file ./container-images/nkp-catalog-applications-image-bundle-nkp-version.tar,but when trying to load image I get an error :nkp push bundle --bundle nkp-catalog-applications-image-bundle-v${NKPVERSION}.tar --to-registry=$REGISTRY_URL --to-registry-username=${REGISTRY_USERNAME} --to-registry-password=${REGISTRY_PASSWORD} --to-registry-insecure-skip-tls-verify✓ Creating temporary directorydid find any matching files for "nkp-catalog-applications-image-bundle-v2.15.0.tar" I can see this file is missing, we only have 2 other files in the container-images folder :ls -lh nkp-v2.15.0/container-images/total 12G-rw-r--r-- 1 root root 81 May 14 07:50 NOTICES.txt-rw-r--r-- 1 root root

Hello, I have been testing the NKP Starter in my LAB with Nutanix Community and encountered failures in creating the NKP cluster. The deployment of the NKP Cluster uses the NKP Node OS Image in UEFI mode, which, as many know, has an issue if the VM is created with the default network card in the Community Edition CE 2.1 and UEFI Boot. A workaround is to change the network card to the e1000 model, but doing this during the NKP deployment can cause your task to hang. So, in several attempts, I was able to quickly change the network card in time for the cluster creation command to complete the infrastructure deployment operations. NKP Node OS Image (Rocky Linux 9.5-release-1.32.3-20250430150550) for AHV( Version: v2.15.0 ) Is there any way to provide an instruction for the NKP to deploy the infrastructure with Legacy BIOS or to build an NKP Node OS Image without UEFI? It is mentioned in the documentation that the NKP Node OS Image cannot be customized in the NKP Starter version.

Hello,customer is using two 4-node clusters at different (geo)locations.There is used a async replication of vm’s via protection domains to the remote site, that works and a failover test was successful.customer wants to deploy NKP on its primary cluster, so far so fine.How can NKP Kontroller cluster and working cluster replicated to the secondary site?Protection domain too or another way? kind regards,Thomas  

Looks like there is no ready-to-use image available for NKP 2.16 in the Downloads. For NKP Starter users, what is the update process now if we want to move from 2.15 to 2.16?Documentation does not have any information on the concrete steps, some references are to using the NKP Image builder but even that is unclear. 

Hi all, Is there limitation to worker’s VCPU to NKP Starter license? Best Regards,Joe Wang 

 I deployed a fully functional NKP management cluster without Prism Central — not because I lacked hardware, but because I'm building something different: a natural language control plane for NKP powered by AI agents and the Model Context Protocol (MCP). The goal is to replace point-and-click infrastructure management with conversational orchestration. Given yesterday's AMD + Nutanix $250M partnership announcement targeting agentic AI on NKP, I believe this direction is more relevant than ever.The Problem I'm SolvingAs a telecommunications engineer who has spent 15+ years deploying infrastructure across Latin America, I've observed a consistent pattern: the bottleneck is never the technology — it's the operational complexity.Prism Central is excellent for what it does. But when I think about the next generation of infrastructure management — especially for LATAM enterprises that need to operate NKP clusters at the edge, in air-gapped government environments, and across distributed telc

We are currently running NKE and are looking to move to NKP but have a doubt about the subnet requirements.NKE is currently running with multiple Kubernetes Clusters in a single Subnet. Is it supported and valid to continue in this way with NKP? Ideally, we would like to build the NKP clusters in the same subnet as NKE for the migration work rather than commission a new subnet. The subnet is suitably large, and we use Calico CNI for Networking. 

related same to someone previously raised:https://next.nutanix.com/nutanix-kubernetes-platform-nkp-186/missing-a-file-in-nkp-air-gapped-bundle-v2-15-0-linux-amd64-tar-gz-44497?tid=44497&fid=186 currently i am installing NKP air gap bundle. I can see there is image (nkp-catalog-applications-image-bundle )“Missing a image in nkp-air-gapped-bundle_v2.16.0_linux_amd64.tar.gz ?”I can only see these 2 images. the 3rd one is missing.tried downloading trice, same issue.   

Hi, has anyone tested NKP 2.15 with RHEL 9.6? The official support document only state RHEL 8.10. Asking for a POC environment where customer preference is RHEL 9.6

I have a customer reviewing CIS-hardened images for NKP. They're asking:When and how is patching managed for these images? (automated? manual? frequency?) How does Nutanix handle lifecycle (support windows, deprecation, upgrades)?Any docs/pointers on:Exact patching process & cadence? Lifecycle policy for CIS-hardened images? Customer responsibilities vs. Nutanix-managed?

Version 2.15 reports events “unable to clone 'https://github.com/mesosphere/dkp-catalog-applications': couldn't find remote ref "refs/tags/2.15.0"Inspecting the github source shows that this version number is not available as a tag but as a release. After changing the config to apiVersion: source.toolkit.fluxcd.io/v1beta2kind: GitRepositorymetadata: name: nkp-catalog-applications namespace: kommanderspec: interval: 1m url: https://github.com/mesosphere/dkp-catalog-applications ref: branch: release-2.15 # Use the branch name instead of a taga lot of things start deploying

Ready to supercharge your Kubernetes game? Nutanix and Cisco are teaming up to deliver a hyperconverged powerhouse that’s shaking up cloud-native infrastructure. Think seamless scalability, simplified management, and enterprise-grade Kubernetes—anywhere from on-prem to the edge.In this blog, Nutanix’s VP spills the details on how this combo slashes complexity, boosts performance, and gets your apps to market faster. Want to know why this is the future-proof platform your IT team’s been dreaming of? Click through and find out—plus, get the scoop on their big reveal at Cisco Live 2025 Amsterdam!"Link: https://www.nutanix.com/blog/accelerate-your-kubernetes-journey-with-nutanix-and-cisco

Hi my nkp clients are requesting me to change the nkp connection token to their cluster with kubectl from 24 hours to never changing, Were in a airgapped environment and they said it will help them greatly.I didn't find any documentation on how to do it.If you could let me know how it can be done or direct me to the relevant documents it will really help us.Thank you very much.In the documentation it talks about changing the settings upon creation but the cluster is production and running and I need to change on the existing one.

running Nutanix CE on a single server with NKP 2.16 (3 management nodes and 4 worker nodes). After enabling NAI 2.6, the NKP UI started showing "No Data", although NKP clusters and NAI services are working fine. The issue is that NKP cannot be managed from the UI, while the backend functionality appears normal. Any guidance would be appreciated

Environment Platform: Nutanix NC2 Prism Central: deployed and reachable NKP: v2.16.0 Deployment methods tried: NKP from Marketplace NKP CLI (nkp create cluster nutanix ...) Problem descriptionAfter deploying NC2 and Prism Central, I tried to deploy an NKP management cluster. Only the first control plane VM is created successfully. The cluster never initializes, and all worker machines remain stuck/pending. The status stays at: “Waiting for Cluster control plane to be initialized” / WaitingForKubeadmInit. Symptoms / Output./nkp describe cluster --cluster-name=managment Cluster/managment False Info WaitingForKubeadmInit├─ControlPlane - KubeadmControlPlane/... False Info WaitingForKubeadmInit│ └─Machine/... True└─Workers  └─MachineDeployment/... False Warning WaitingForAvailableMachines (3 replicas, 0 available)    ├─KubeadmConfig/... WaitingForControlPlaneAvailable    └─NutanixMachine/... WaitingForInfrastructureExpected behaviorThe control plane should bootstrap succe

Want to supercharge your Kubernetes game without breaking the bank or refactoring your apps? In this deep dive, Nutanix’s Dwayne Lessner spills the tea on why running the Nutanix Kubernetes Platform (NKP) on Nutanix Cloud Clusters (NC2) is a game-changer.Think cost-effective scaling, screaming-fast NVMe/SSD performance, and seamless mobility across on-prem, edge, and cloud—all without the hyperscaler price gouging. Plus, built-in observability and enterprise-grade tricks like thin provisioning that’ll make your ops team weep with joy. Curious how this combo future-proofs your workloads? Click through and find out!.Link to article: Why You Should Run Nutanix Kubernetes Platform on Nutanix Cloud Clusters

Course | Nutanix UniversityHere im unable to open the contents of NKP course, kindly help with this 

Hello I have some GKE clusters with persistent volume on Cluster Nutanix In this days, We are doing one POC with NKP in the same Cluster.My Question, Is possible attach GKE to Console of NKP? I understand that I can't make any changes to the nodes, but I want to know if I can view them perfomance.its possible?