Nutanix Disaster Recovery

Make Disaster Recovery a Breeze

  • 244 Topics
  • 665 Replies

244 Topics

G
GiuseppePinoVoyager
asked in Nutanix Disaster Recovery

Magneto is in recovery mode after PC DR

Hi all,I received the following error when I tried to create a protection policy with sync replication for one vm from two clusters managed from the same PC, “Failed to apply protection policy 'PP_sync' on the VM 'CentOS7-DEV' because 'Magneto is in recovery mode after PC DR'”. Some time ago I restored the PC but I didn't find any error before now, also NCC didn't report any issue.Regards

0
G
6 hours ago
L
LinKanTrailblazer
asked in Nutanix Disaster Recovery

Could PC Disaster Recovery (formerly Leap) support replication compression?

Dears:I know currently, there are one setting for remote site called “Compress on Wire”. But I cannot find any related setting in PD-based DR.Here I want to ask: Could PC Disaster Recovery (formerly Leap) support replication compression?Thank you very much!

0
L
1 month ago
I
IanAddisWayfarer
asked in Nutanix Disaster Recovery

vTPM Backup

Hi all,What’s the latest on vTPM backup?  We have Windows 10 development VMs hosted in Nutanix and backed up by HYCU.  However, Windows 10 support is ending and as I understand it, Windows 11 cannot be backed up from Nutanix due to the inability to backup a vTPM.Is there any way of hosting a vTPM-required OS on Nutanix and having a backup of it?  It doesn’t seem like an unreasonable requirement?Thanks,Ian.

0
I
2 months ago
L
lleuba86Adventurer
asked in Nutanix Disaster Recovery

Data Protection - Protection Domain info on target side

Hi,We have just implemented a pairing with a customer on-prem cluster and a protected side cluster and created some protections domains.All seems to works well but we search to obtain more information on protected side.We are currently unable to view Entity Count, Next Snapshot Time, or Entities on a selected Data Protection.Is there a way to obtain this informations ? Is there anything thats was badly configured ?Thanks for your help ;)

2
L
5 months ago
L
lleuba86Adventurer
asked in Nutanix Disaster Recovery

Select disk to snapshot in Data Protection for AHV-Based VMs

Hi,For a new customer we currently configure the data protection context from the production cluster to a DR cluster.The customer want to reduce the storage sizing by selecting which disks on the VMs that will be replicated.Is it possible ? I don’t find anything about this on official documentations.Thanks and best regards.

2
sl.farhanparkar
5 months ago
M
Mahendar ReddyTrailblazer
posted in Nutanix Disaster Recovery

Nutanix replication trafiic encryption

How Nutanix protection domain replication can be encrypted, is there any default encryption availableor we need to enable the encryption.

7
M
6 months ago
G
GiuseppePinoVoyager
asked in Nutanix Disaster Recovery

Suspend async DR replica

Is it possible to "suspend" the Protection policy schedule without remove it?Thanks

1
sl.farhanparkar
6 months ago
L
LinKanTrailblazer
asked in Nutanix Disaster Recovery

Any ideas about CG when support near sync replication?

Dears:I checked the “Nutanix Disaster Recovery Guide” and found from AOS 6.6, CG replication was supported on async replication, but not on nearsync or sync replication. Any ideas about CG when support near sync replication?The reason why I will have this question is we want to use CG nearsync replication to protect SQL server cluster. (Our RPO is about 10-15 mins), so I am worried about during planned failover or unplanned failover, the SQL server cluster could not start normally. Thank you very much! 

6
L
7 months ago
L
LinKanTrailblazer
asked in Nutanix Disaster Recovery

How many Prism Central Needed for PRD & DR?

Dears: Currently, we have 3 node cluster in PRD site. Now we plan to build the DR ability to build a multiple node cluster in DR site. We have one PC instance in PRD site now. My question is: In order to use protection policy to replicate PRD data to DR site(We plan to use nearSync), do we need to create a new PC instance in DR site?It seems one PC could manage multiple PEs, so one PC instance is enough. But what’s the function for DR site PC? Is it a mechanism to sync data from PRD PC to DR PC?

1
G
7 months ago
W
Wayne ZhangExplorer
asked in Nutanix Disaster Recovery

Which hardware platform support Mine with Veeam?

Hello team,The Mine™ with Veeam Guide only mensions the NX platform. The question is whether we can use Lenovo/Dell/HPE platform to install Mine with Veeam?

0
W
7 months ago
M
Mahendar ReddyTrailblazer
posted in Nutanix Disaster Recovery

Nutanix Leap

We have pro license do we need add on license for Nutanix DR(leap) 

2
Moustafa Hindawi
7 months ago
M
Mahendar ReddyTrailblazer
posted in Nutanix Disaster Recovery

Citrix master image vm replication

can we keep multiple VDI master image vms in same consistency group or do we need to keep them one master image for consistency group? 

1
JeroenTielen
7 months ago
M
Mahendar ReddyTrailblazer
posted in Nutanix Disaster Recovery

Prism element based replication protection domian DrPorts

do we need to open port 9440 between sites for successful protection based replication.do we need 9440, 2020,2009 or any other ports required to open

0
M
7 months ago
I
iss_inetWayfarer
posted in Nutanix Disaster Recovery

Nutanix MINE with HYCU

Dear Experts  I would like to know the below How can we download the HYCU Virtual Appliance.? Are we suppose to get the HYCU Customer Portal Credentials , when we procure the HYCU licenses.Please advice.

0
I
7 months ago
N
Nutanix userVoyager
asked in Nutanix Disaster Recovery

Questions on backup

Hi All,We are using a backup tool on some Nutanix clusters and after some testing, it turns out backup does not work very well. So I consider alternatives and explore the full backup capacities with the protection domains. Is it possible to do granular backup (restore file), can we run pre/post scripts?Also Can we backup non-Nutanix clusters (VMware) with PD?Thanks in advance for your answersRegards,  

1
sl.farhanparkar
7 months ago
A
AngeTrailblazer
asked in Nutanix Disaster Recovery

Nutanix Protection Domain + SRM vs vSphere Replication + SRM

Hello Community,I want to configure replication and failover plans between 2 separate Nutanix clusters, both running ESXi hypervisor.I do have Vmware SRM licenses and I am aware of these 2 possibilities :1. Replicate VMs using Nutanix Protection Domains (either with Async DR or with Metro Availability) and configure Failover scenarios with SRM via Nutanix SRA2. Replicate VMs using VMware vSphere Replication Appliance and configure Failover scenario with SRMMy question is which of the possibility would you recommend ? which is better in terms of performance and flexibility ?Thanks.

6
A
7 months ago
bhavin7array
bhavin7arrayVoyager
asked in Nutanix Disaster Recovery

Restore Snapshot Remote Site Drive Letter Does Not Get Assigned

We have 2 Cluster - Primary cluster we are sending backup cluster for certain VM. If We restore snapshot on same cluster - > guest os can easly assign drive letter But whichever is near by snapshot which available at Backup Cluster if try to restore on Backup clusterDrive letter are not getting assign, which impacting DB Services as DB lying in unassigned drives

1
sl.farhanparkar
8 months ago
M
Mahendar ReddyTrailblazer
posted in Nutanix Disaster Recovery

Protection domain restore

If restore from protection domain snapshot at remote site, SID will change the windows 2016 server or do we need to run the sysprep to change the sid?

4
Moustafa Hindawi
8 months ago
B
booktrunkExplorer
asked in Nutanix Disaster Recovery

Prism runs the api etc.. on port 9440 rewrite 443 to this?

Hi.We are having no end of trouble with our backup software (druva) it basically keeps trying to talk on port 443 not 9440. Is there a way on a Prism element to be able to do some sort of rewrite so any traffic coming into the server incorrectly on port 443 can get rewritten to go to 9440 instead?

2
JeroenTielen
8 months ago
M
Mahendar ReddyTrailblazer
posted in Nutanix Disaster Recovery

Protection domain

Can we schedule consistency groups in different schedules in single protection domain?

1
JeroenTielen
8 months ago
B
booktrunkExplorer
asked in Nutanix Disaster Recovery

ESXI Veeam Backup to AHV at a different site

Hi. So I have veeam backing up a set of servers around 1TB worth of data they are backed up locally to a Qnap.  The servers are Windows 2012R2 on ESXi. The site I want to be able to restore them to has a lot of space on a Nutanix system running AHC (Acropolis) So can I just say shunt the Veeam Backups to the 2nd Site and configure Veeam to talk to the Nutanix system if so how do i get it to restore the VMWare backups so i get get them working on Nutanix.  It’s a pure DR Test initially and then if it works I might use the same method to actually migrate the whole sytem from the older vmware harware to living permenantly at the different site on acropolis. 

2
Moustafa Hindawi
9 months ago
LinuxInside
LinuxInsideVoyager
asked in Nutanix Disaster Recovery

Beginner's guide to testing DRaaS - where can I find?

I’m looking for a starting guide to testing failover to our Xi cluster. I believe that it is all configured and ready to go, but I’ve been tasked to write a procedure guide for a planned failover test during an outage window.Our on-prem cluster: AOS 6.5.2, PC pc.2022.6.0.1,.Hypervisor    20220304 build-342   Our Xi / DRaaS cluster is located in XI-US-EAST-1C, and has a few always-on servers. We are replicating a number of on-prem servers to it, on a one-hour, 4-hour, 1-day, and 1 week RPO basis, depending on device criticality. Some are defined as application consistent, some are not.We have about 70 protected entities.I am able to log into my local Prism Central and Prism Element, and I can get to SSH sessions on the CVMs and PC if need be. I am able to log into my.nutanix.com and see the configuration there, the AZs, and etc. Please let me know if some additional information about my cluster would help.What I need is a guide to failing over for testing, and recovering to the on-prem

2
LinuxInside
9 months ago
N
Nutanix userVoyager
asked in Nutanix Disaster Recovery

3 nodes distributed in 2 rooms

Hi,Is it possible to have a stretched cluster (Metro-Availability) of 3 nodes: 2 nodes in 1 room and 1 node in another room. If it is possible, is there any documentation describing that design as well as the limitations?Thanks in advance for your answers   

1
Moustafa Hindawi
10 months ago
B
bmilesftcScout
asked in Nutanix Disaster Recovery

ESXi VMs not recognized in Veeam after async DR failback

We are running asynchronous Protection Domains and also employee Veeam backups of VMs. If we failover to the secondary site and then failback to the primary site, Veeam no longer recognizes the VMs in previously created backup jobs. We have to delete all the old backup jobs and set them up again. This is with ESXi hosts. Is that normal?

2
qamarabbas
10 months ago
S
SoothettesWayfarer
asked in Nutanix Disaster Recovery

Automate in-guest script execution on the guest VMs during recovery (NGT)

Hi can someone know the script to change the computer name during recovery plan. This is our script, everything is working except the script to change computer name. Thank you. netsh interface ip set address name="Ethernet 4" source=static ^ address=x.x.x. mask=255.255.255.0 gate=x.x.x.xnetsh interface ip set dnsservers "Ethernet 4" static x.x.x.xtimeout /t 10 /nobreakWMIC computersystem where name="computername" call rename name="newcomputername"shutdown.exe -r -t 00  

1
JeroenTielen
10 months ago

Badges

Show all badges
Terms & Conditions