Tell Us What You Think About Nutanix Storage – It’s Fast and Rewarding!
Webscale Virtualization for the Enterprise
Recently active
I have an incident with a new 3 Host cluster with NCE 6.8.1: In Dashboard show Please enter your NEXT account information to access the cluster. When I log in with my mynutanix credentials I get the following error message: Cannot validate the credentials provided The CMV IP has internet access, pinging google.com or nutanix.com resolves without problems.Could someone help me with this problem, since the Prism dashboard won't load.
Is there any way to increase the number of source ports that can be configured in a Traffic Mirroring Session? If not, does Nutanix plan to increase the number at some point?
Hello,Just wanted to know if anyone else here experienced this issue where the host in my single node cluster is not schedulable. Here is the output from acli host.getnutanix@NTNX-CVM:~$ acli host.get REDACTED172.xxx.x.xx { cpu_usage_ppm: 0 host_overhead_bytes: 0 logical_timestamp: 1 max_mem_ha_reserved_bytes: 0 mem_assigned_bytes: 0 mem_usage_bytes: 0 memory_size_bytes: 0 node_state: "AcropolisNormal" num_cpus: 0 pool_size_bytes: 0 schedulable: False uuid: "REDACTED"} Initial issue I had was that I cannot power-on the VM due to this error:NoHostResources: No host is schedulable: 14 And after checking this host scheduling thing is what I thought of the culprit on why I cannot power-on my UVM. Already the following:1. Enter/exit maintenance mode2. Restart the CVM / AHV HostAlso noticed that the Prism element Hardware tab shows 0 usable CPU/RAM capacity on this AHV host. I use the version 6.8.1 and it is installed as a VM in an ESXi host.
Hi Anyone have a playbook that I can use accomplish the subject feat? I have to power cycle 470 VMs in groups. i.e Group1 has 45 VMs, Group2 has 45 vms and so on.
Howdy y’all,I am working through getting NGT installed across our fleet of 250 VMs and need to be able to mass add cdroms to each VM in our fleet.I’ve been able to generate lists of VMs but have yet to be able to add a cdrom to any of them.I’ve been getting Bad Request Errors (400) so I’m sure it’s how the payload is being created, but no combination of settings has worked for me.I’m obviously frankensteining from across the web, but I offer you my meager script for scrutiny.Any help is appreciated!Thank you!import urllib3import getpassimport sys import ntnx_vmm_py_clientfrom ntnx_vmm_py_client import Configuration as VMMConfigurationfrom ntnx_vmm_py_client import ApiClient as VMMClientfrom ntnx_vmm_py_client.rest import ApiException as VMMExceptionimport ntnx_vmm_py_client.models.vmm.v4.ahv.config as AhvVmConfig #Disable SSL Checksurllib3.disable_warnings(urllib3.exceptions.InsecureRequestWarning) #Get the credentialspc_ip ="<Prism Central IP>"username = "<Username>"cluste
Happy Holidays & Merry Christmas! 🙏🏽😇 Last month, I concluded about a month of extensive tests and validations in Nutanix-Senate Lab with latest versions of AHV, AOS, and Prism Central verifying the following capabilities:(1) Ability to easily mass-deploy 100+ Windows 11 Virtual Desktops (Win11 VDs) in one workflow via Nutanix Prism Central,(2) Ability to quickly backup all 100+ Win11 VDs in one workflow via Prism Central “Protection Policies” to Remote Site with RPO of 15 minutes,(3) Ability to rapidly failover all 100+ Win11 VDs to Remote Site via Prism Central, and(4) Ability for users of Win11 VDs to speedily restore their own local data via Nutanix Self-Service Restore (SSR).Many thanks to Nutanix Team (Adam Farry☁️| Simon Motture, Tim Fisher, Neil Mantle, and Kevin Bacon 🥓) for all their help and engagement on this! 🙏🏽
Currently when orchestrating the creation of Network Function VMs, I am using a Prism Element V2 REST API to set VM/Host Affinity as instructed by the Nutanix team a few years ago. Is this still what is recommended or can Affinity Policies be used instead? It seems that in order to use Affinity Policy for service chaining each Affinity Policy would need to have 1 VM (the network function VM) and 1 host.
Hello , I am trying to understand what is the role of SMCIPMITool , as I am abled to reach the IPMIs from the foundation VM yet not sure what is causing the failure , I am attempting to re-image AOS 6.5.6.6 on 2 nodes .What I have found so far it is responsible to reboot , power on / off the hosts via IPMI not sure why it can not power them back on. during the foundation the nodes are powered off then the below traces are seen Traceback (most recent call last): File "foundation/imaging_step.py", line 160, in _run File "foundation/decorators.py", line 78, in wrap_method File "foundation/imaging_step_init_ipmi.py", line 289, in run File "foundation/imaging_step_init_ipmi.py", line 129, in boot_phoenix File "/home/nutanix/foundation/lib/foundation-platforms/foundation_bmc-2.16+r.2114.64ba09cb-py2.py3-none-any.whl/bmc_utils/boot_media.py", line 47, in wrapped return fn(self, iso, *args, **kwargs) File "/home/nutanix/foundation/lib/foundation-platforms/foundation_bmc-2.16+r.2114.6
I have customer having 2*NX3235-G9 nodes and want to have separate cluster. customer have existing Nutanix cluster where witness VM will be installed.I’m using windows portable foundation.1st- Can someone guide me complete steps to create a cluster including IP subnets for host, CVM, IPMI and cluster.2nd- Witness VM will be installed first then create cluster?3rd- In Nutanix download, there’re 3 files that are Boot image, data image and home image. so which file have to be downloaded and used?4- Witness VM IP address should be in the same subnet of CVM and cluster?
hmmmmm so templates are nowhere near as good as Vmware customizations! Not used to have to be messing with sysprep and I’m already having issues 😥! Our customisations for windows servers in VMWare just worked. Once the template was built we just deployed from template and filled in name and IP’s along with the usual hardware configs and the VMs deployed and joined our domain.
We have just had a new cluster installed and its running AHV, I have used Nutanix for about 6 years but always with ESX so its all a bit new to me!I’m sure I’ll have a few questions but currnetly I have this annoying issue! I have uploaded a few images to PC, qcow2 files, but when I deploy a VM using the images it always creates the VMs in the selfservicecontainer storage container, which is a tad annoying as I then have to move it manually using acli vm.update_container vm-name container=container name wait=false In PC the storage container drop down box for the VM is grayed out so I can’t change it in the PC web GUI. the cli works but I would like to create the VM in what ever storage container I want without having to move it after the event! Is this possible?
I can’t start VM. I checked the status of the host with “acli host.get” command. Here is the output: 0.0.2.10 { cpu_usage_ppm: 0 host_overhead_bytes: 0 logical_timestamp: 1 max_mem_ha_reserved_bytes: 0 mem_assigned_bytes: 0 mem_usage_bytes: 0 memory_size_bytes: 0 node_state: "AcropolisNormal" num_cpus: 0 pool_size_bytes: 0 schedulable: False uuid: "22deb90e-cd1c-48af-af43-5a3192775999"} The host is not in maintenance mode. Is there any command to flip “schedulable” to True?
Hi, Nutanix guest tools service restarting on cvms.After starting Ngt master initialization it failedI20241113 06:08:09.987768Z 23965 ngt_master.cc:320] Starting Ngt master initializationI20241113 06:08:09.987829Z 23965 ngt.cc:506] Ngt master changed to 192.168.6.73:2073+15769496029I20241113 06:08:09.987845Z 23965 ngt.cc:519] Initializing ngt guest interface to 192.168.6.73:2073I20241113 06:08:09.987959Z 23967 zeus_leadership_ops.cc:2354] FetchLeaderOp(174)[arithmos lk:0 watch_id:15 inv_cbk:1 wait:0]: old leader handle:: new leader handle:192.168.6.64:2025I20241113 06:08:09.987975Z 23967 zeus_leadership_ops.cc:2242] Updating leader cache for arithmos to 192.168.6.64:2025I20241113 06:08:09.988018Z 23967 zeus_leadership_ops.cc:2547] StartLeaderChangeWatchOp(173)[arithmos watch_id:15]: Successfully set the watch for arithmos leadershipI20241113 06:08:09.988027Z 23967 zeus.cc:1793] Finished StartLeaderChangeWatchOp(173)[arithmos watch_id:15]I20241113 06:08:09.988273Z 23965 ngt_master.cc:41
Hi,I bought this network card to replace the one on my motherboard which was giving up the ghost (loss of speed).But this one is not detected on my host, I think it's a driver problem, but I don't understand how to install them.https://www.amazon.fr/dp/B0CF1Y9WXV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I have some issue connecting PrismCentral using powershell. In UI I can login using AzureSSO. But I need to use to able to pull-out some report.
Greetings everyone,I have been successful at creating a rest api call to ADD a category to the VM. The issue is we only want 1 category per VM, so if the VM already has a category assigned we want it to REPLACE the value and not ADD it. With my current code (ie: use GET command of VM, remove Status, replace categories and categories_mapping then use PUT command) the JSON object looks good before uploading but afterwards I see the new category and the old one. I tried using a PATCH command but AHV doesn’t like that (and it isn’t in the documentation either). New Category = NEW_CATVM Original State: "categories": { "OLD_CAT": "OLD_CAT", } VM Post My Update State: "categories": { "OLD_CAT": "OLD_CAT", "NEW_CAT": "NEW_CAT" } VM Desired State: "categories": { "NEW_CAT": "NEW_CAT" }Any help would be greatly appreciated.
I have several Citrix clusters with NX-8170-G8 and NX-8170-G9 nodes. I want to perform updates but the VMs will not migrate. VMs need to be power cycled in order to get the VMs revert to the lower CPU in the cluster.I was looking for script that i can run in the intelligent ops playbook that will Identify the VMs that needs to be power cycled, and power cycle them. Can assist with script to get the state of the VMs that needs to be power cycled? Power cycle the VMs which don't have APC configured. Power cycle the VMS which don't have APC configured to ensure CPU compatibility. Power cycle all the VMS in the cluster to ensure CPU compatibility. How do I find VMs that do not have APC configured? This one of the VMs affected that needs to be power cycled.{ can_clear_removed_from_host_uuid: True config { agent_vm: False allow_live_migrate: True annotation: "Updated 4/14/23 to match Xen Snapshot 35" apc_config { apc_enabled: False } bios_uuid: "71ca6758-0ee3-49d
I just deploy new 3 Node Nutanix on DELL XC760 .I using Foundation version 5.7 to deploy and install Nutanix. When the first time 2 Node are succesfully installed, but i have problem at 1 Node other. I have try multiple time to re-deploy but got same problem.Below i capture the log error.Please any advices.Thank you. 2024-11-05 05:12:46,122Z log.py:102 INFO [159/160] Waiting for CVM to initialize network2024-11-05 05:13:10,513Z log.py:102 INFO [160/160] Waiting for CVM to initialize network2024-11-05 05:13:10,513Z log.py:102 INFO Run ssh cmd on SVM2024-11-05 05:13:10,528Z log.py:102 INFO Running cmd ['/usr/bin/ssh -i /root/firstboot/ssh_keys/nutanix -o StrictHostKeyChecking=no -o NumberOfPasswordPrompts=0 -o UserKnownHostsFile=/dev/null nutanix@192.168.5.2 "ls"']2024-11-05 05:13:13,632Z log.py:102 INFO Execution of command ['/usr/bin/ssh -i /root/firstboot/ssh_keys/nutanix -o StrictHostKeyChecking=no -o NumberOfPasswordPrompts=0 -o UserKnownHostsFile=/dev/null nutanix@192.168.5.2 "ls"'
Hi,I upgraded AOS 6.8.1 to 6.10 but now I have a version incompatible with AHV and it is impossible via LCM to upgrade AHV. In the related KB 15185 there is a workaround but it does not work in my nested environment. Does anyone have a suggestion?Thanks
Hello,I can’t get a Win11 ISO to boot on CE 2.1 using vTPM and Secure Boot. It will boot without the secure boot enabled, but it won’t pass the checks the installer runs for compatibility. I tried with and without the e1000 NIC workaround for UEFI.
iam facing an issue with prixm central 2024.2 , whenever i go to the login screen it shows “iam-proxy.ntnx-base” and i cant login . any ideas ?
Hi all, We will change soon our nutanix cluser. We have decide to buy Lenovo ThinkAgile HX. However I would like prepare the installation. Do you know if there is a document how install Nutanix on Lenovo ThinkAgile HX ? The commecial nutanix not the community. Kind regards
Hi All,Our nutanix 1175S-G9 is a 4-port 10G BaseT, initially connected to the two portseth0, eth2, later, I change to eth0 and eth1, and then NCC check will show the message eth2 down. Is there any solution ?
Hi All,My customer has a scenario where they initially set up Nutanix in a hardware management lan, which is controlled by a firewall. Now they have a need to connect the backup server on the other end of the firewall, without opening the firewall, can we set the external IP to be bound to the network permitted by the firewall, so that the backup server can connect to the external IP? I don't know if there will be any problems.
I was honored by my company, and recieve 1 block 4 nodes NX-3060-G5 for use on my own projects. It’s a old node without support and inside of EOL list. What happened is that, i don’t know how, received an alert saying that AHV had a crash on files. But 20 seconds after the host was okay, and the alert was solved itself. But, 3 machines which was working into this node crashed too, preventing access through console, migrate the VMs, power off, etc. I tried remove the host for reimage it, but is stuck: And when I ran the NCLI command to remove the host, trying get the status, shows the follow: Anyone could help me for solve this issue? Any tips?
